بررسی خصوصیات مورفولوژیکی و فیزیکی- مکانیکی چندسازۀ چوب پلاستیک ساخته‌شده از پلیمر گیاهی پلی‌لاکتیک اسید

[1]. Jesuarockiam, N., Jawaid, M., Zainudin, E., Sultan, M., and Yahaya, R. (2019). Enhanced thermal and dynamic mechanical properties of synthetic/natural hybrid composites with graphene nanoplateletes. Journal of Polymers, 11(2): 1085-1103.

[2]. Lopez, Y. M., Paes, J. B., Rodriguez, E. M., Gustave, D., and Gonçalves, F. G. (2018). Wood particleboards reinforced with thermoplastics to improve thickness swelling and mechanical properties. Cerne, 24(4): 369-378.

[3]. Caraschi, J., and Leo, A. (2002). Wood flour as reinforcement of polypropylene. Journal of Material Research, 5(4): 405-409.

[4]. Sinha, S., Yamada, K., Okamoto, M., Fujimotoa, Y., Ogami, A., and Ueda, K. (2003). New polylactide. Layered silicate nanocomposites: designing of materials with desired properties. Polymer, 44(3): 6633–6646.

[5]. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A., and Jamalirad, L. (2017). Biodegradation behaviors and color change of composite’s based on type of bagasse pulp/polylactic acid. Iranian Journal of Wood and Paper Industries, 8(1): 1-13.

[6]. Drumright, R. E., Gruber, P. R., and Henton, D. E. (2000). Polylactic acid technology. Advanced Materials, 12(23), 1841-1846.

[7]. Rezaeigolestani, M., Khanjari, A., Misaghi, A., Akhondzadeh, Basti, A., Abdulkhani, A., and Fayazfar, S. (2018). Development of biodegradable antibacterial Polly-lactic acid based packaging films with bioactive compounds. Iranian Journal of Wood and Paper Industries, 9(2): 153-162.

[8]. Huda, M.S., Drzal, L.T., Misra, M., and Mohanty, A.K. (2006). Wood-fiber-reinforced poly (Lactic acid) composites: evaluation of the physicomechanical and morphological properties. Journal of Applied Polymer Science, 102(7): 4856–4869.

[9]. Qin, L. (2011). Mechanical and thermal properties of poly (lactic acid) composites with rice straw fiber modified by poly (butyl acrylate). Chemical Engineering Journal, 166(2): 772–778.

[10]. Tisserat, B., Joshee, N., Mahapatra, A.K., Selling, G.W., and Finkenstadt, V.L. (2013). Physical and mechanical properties of extruded poly (lactic acid)-based paulownia elongate bio-composites. Industrial Crops and Products, 44(3): 88– 96.

[11]. Abdolkhani, A., Hoseinzadeh, J., and Hedjazi, S. (2014). Characterization of cellulose reinforced polylactic acid solution cast nanocomposite. Journal of Forest and Wood Products, 67(2): 271-282.

[12]. Almasi, H., Ghanbarzadeh, B., and Dehghannia, J. (2014). Properties of poly (lactic acid) nanocomposite film containing modified cellulose nanofibers. Iranian Journal of Polymer Science and Technology, 26(6): 485-497.

[13]. Dadashi, S., Mousavi, S.M., Emam D-Jomeh, Z., and Oromiehie, A. (2012). Films based on poly (lactic acid) biopolymer: effect of clay and cellulosic nanoparticles on their physical, mechanical and structural properties. Iranian Journal of Polymer Science and Technology, 25(2): 127-136.

[14]. Kargarfard, A. (2011). The effect of wood particles type and coupling agent content on properties of composites from recycled polypropylene and eucalyptus wood. Journal of Forest and Wood Products, 64(1): 55-64.

[15]. Ichazo, M.N., Albano, C., Gonzalez, J., Perera, R., and Candal, M.V. (2001). Polypropylene/ wood flour composites: treatments and properties. Composites Structure, 54(2-3): 207-214.

[16]. Kord, B., Ismaeilimoghadam, S., and Malekian, B. (2010). Effect of immersion temperature on the water uptake of polypropylene/wood flour/ organoclay hybrid nonocomposite. BioResources, 6(1):584-593.

[17]. Bouafif, H., Koubaa, A., Perre, P., and Cloutier, A. (2009). Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites. Composites Part A: Applied Science and Manufacturing 40(12):1975-1981.

[18]. Ghasemi, E., Azizi, H., and Naeimian, N. (2009). Investigation of the dynamic mechanical behavior of polypropylene/ (wood flour)/ (kenaf fiber) hybrid composites. Journal of Vinyl and Additive Technology, 15(2):113 – 119.

[19]. Rajak, D. K., Pagar, D., Pagar, L., and Linul, E. (2019). Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications, Journal of Polymer, 11(4): 1667-1702.

[20]. Saffarzadeh, S., and Ebrahimi, G.H. (2000). A study of cellulosic fibers/high density polyethylene composites and their mechanical properties. Iranian Journal of Natural Resources, 53(3): 217-226.

[21]. Stark, N.M., and Rowlands, R.E. (2003). Effects of wood fiber characteristics on mechanical properties of wood. Polypropylene composites. Wood and Fiber Science, 35(2):167-174.

[22]. Kord, B., Pourabbasi, S., and Kiaeifar, A. (2010). Effect of amount and type of reinforcing cellulose material on the physical-mechanical properties of wood plastic composite. Journal of Sciences and Techniques in Natural Resources, 5(3): 57-68.