پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شمارهها | 6,230 |
| تعداد مقالات | 67,764 |
| تعداد مشاهده مقاله | 115,197,649 |
| تعداد دریافت فایل اصل مقاله | 89,945,777 |
Assessing the Performance of Corroding RC Bridge Decks: A Critical Review of Corrosion Propagation Models | ||
| Civil Engineering Infrastructures Journal | ||
| مقاله 2، دوره 47، شماره 2، اسفند 2014، صفحه 173-186 اصل مقاله (834.63 K) | ||
| نوع مقاله: Research Papers | ||
| شناسه دیجیتال (DOI): 10.7508/ceij.2014.02.002 | ||
| نویسندگان | ||
| Amir Tarighat1؛ Fahimeh Jalalifar* 2 | ||
| 1Assistant Professor, Department of Civil Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran. | ||
| 2M.Sc., Department of Civil Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran. | ||
| چکیده | ||
| Corrosion of steel reinforcement is one of the most prevalent causes of reinforced concrete (RC) structures deterioration in chloride-contaminated environments. As a result, evaluating the impact of any possible corrosion-induced damages to reinforced concrete bridges strongly affects management decisions: such as inspection, maintenance and repair actions. The corrosion propagation phase is a significant factor in the service life of reinforced concrete structures and thus, it is requires appropriate attention. Various models have been developed to simulate and/or predict the propagation phase. This paper proposes that a method in which a reliability framework is developed to assess the durability of reinforced concrete structures under corrosion inmarine environments functions better. The main concern of this study is chloride-induced corrosions.In due regard, serviceability and ultimate limit states of the structure are also taken into account. Subsequently, the proposed method is employed to review the existing models for prediction of corrosion propagation. | ||
| کلیدواژهها | ||
| Corrosion؛ Deterioration؛ Propagation Models؛ Reinforced Concrete Bridges؛ Structural Reliability | ||
| مراجع | ||
|
ACI. (2005). Report on Factors Affecting Shrinkage and Creep of Hardened Concrete. ACI 209.1R-05, 12.
Ahmad, S. and Bhattacharjee, B. (2000). “Empirical Modeling of Indicators of Chloride-Induced Rebar Corrosion”, Journal of Structural Engineering, 27(3), 195-207.
Andrade, C., Alonso, M.C., Feliu, S. and Gonzalez, J.A. (1996). “Advances in the on-site electrochemical measurement of reinforcement corrosion and their use for predicting residual life”, Proceeding of 13th international Conference on Corrosion, Melbourne.
Breysse, D., Yotte, S., Salta, M., Schoefs, F., Ricardo, J. and Pereira E. (2008). “Uncertainties in NDT condition assessment of corroding structures in marine environment”, Proceeding of 1st International Conference on Construction heritage in coastal and marine environments. Damage, diagnostics, maintenance and rehabilitation, MEDACHS08, Lisbon.
Duprat, F. (2007). “Reliability of RC beams under chloride-ingress”, Construction and Building Materials, 21, 1605–1616.
El Hassan, J., Bressolette, Ph., Chateauneuf, A. and El Tawil, Kh. (2010). “Reliability-based assessment of the effect of climatic conditions on the corrosion of RC structures subject to chloride ingress”, Engineering Structures, 32, 3279–3287.
El Maaddawy, T. and Soudki, K. (2007). “A model for prediction of time from corrosion initiation to corrosion cracking”, Cement and Concrete Composite, 29(3), 168–175.
Firouzi, A. and Rahai, A. (2011). “Prediction of extent and likelihood of corrosion-induced cracking in reinforced concrete bridge decks”, International Journal of Civil Engineering, 9(3), 183-192.
Lentz, A., Faber, MH. and Johnsen, T. (2002), “Half-cell potential measurements for condition assessment”, Proceeding of 1st, International Conference on Bridge Maintenance, Safety and Reliability, Barcelona.
Li, C.Q. and Lawanwisut, W. (2003). “Serviceability assessment of reinforced concrete structures in marine environments”, Proceeding of 2nd, International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures, Paris.
Li, C.Q. (2002). “Initiation of chloride induced reinforcement corrosion in concrete structural members – Prediction”, ACI Structural Journal, 99(2), 133-141.
Li, C.Q. (2003). “Life-Cycle Modeling of Corrosion-Affected Concrete Structures: Propagation” Journal of Structural Engineering, 129(6), 753-761.
Liu, T. and Weyers, RE. (1998). “Modeling the dynamic corrosion process in chloride contaminated concrete structures”, Cement and Concrete Research, 28(3), 365-379.
Lounis, Z. (2003). “Probabilistic modeling of chloride contamination and corrosion of concrete bridge structures”, Proceeding of 4th, International Symposium on Uncertainty Modeling and Analysis, Maryland.
McGee, R. (1999). “Modelling of durability performance of tasmanian bridges”, In: RE. Melchers, and M.G, Stewart (Eds.), ICASP8 Applications of Statistics and Probability in Civil Engineering, Vol. 1, pp. 297-306, A.A. Balkema.
Melchers, R.E. (1999). “Structural reliability analysis and prediction”, Wiley, New York.
Olsson, A., Sandberg, G. and Dahlblom, O. (2003). “On latin hypercube sampling for structural reliability analysis”, Structural Safety, 25(1), 47-68.
Papadakis, V.G., Roumeliotis, A.P., Fardis, MN. and Vagenas, CG.(1996). “Mathematical modelling of chloride effect on concrete durability and protection measures”, In: R.K. Dhir, and M.R. Jones (Eds.), Concrete Repair, Rehabilitation and Protection, pp. 165-174, London (UK): E and FN Spon.
Raupach, M. (2006). “Models for the propagation phase of reinforcement corrosion – an overview”, Materials and Corrosion, 57(8), 605-613.
Stewart, M.G. and Suo, Q. (2009). “Extent of spatially variable corrosion damage as an indicator of strength and time-dependent reliability of RC beams”, Engineering Structures, 31, 198–207.
Stewart, M.G. and Rosowsky, DV. (1998). “Structural safety and serviceability of concrete bridges subject to corrosion”, ASCE Journal of Infrastructure Systems, 4(4), 146-155.
Suo, Q. and Stewart, M.G. (2009). “Corrosion cracking prediction updating of deteriorating RC structures using inspection information”, Reliability Engineering and System Safety, 94, 1340–1348.
Thoft-Christensen, P.(2000). “Stochastic modelling of the crack initiation time for reinforced concrete structures”, Proceedings of ASCE Structures Congress, Philadelphia.
Trejo, D. and Monteiro, P.J. (2005). “Corrosion performance of conventional (ASTM A615) and low-alloy (ASTM A706) reinforcing bars embedded in concrete and exposed to chloride environments”, Cement and Concrete Research, 35(3), 562-571.
Tutti, K. (1982). “Corrosion of steel in concrete”, Swedish Cement and Concrete Research Institute, CBI Research Report 4, Sweden.
Vu, K.A.T. and Stewart, M.G. (2000). “Structural reliability of concrete bridges including improved chloride-induced corrosion models”, Structural Safety, 22(4), 313-333.
Yalçyn, H. and Ergun, M. (1996). “The prediction of corrosion rates of reinforcing steels in concrete”, Cement and Concrete Research, 26(10), 1593-1599.
| ||
|
آمار تعداد مشاهده مقاله: 2,747 تعداد دریافت فایل اصل مقاله: 2,527 |
||