پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 127 |
| تعداد شمارهها | 7,237 |
| تعداد مقالات | 77,624 |
| تعداد مشاهده مقاله | 161,089,143 |
| تعداد دریافت فایل اصل مقاله | 120,788,057 |
Analysis of Hydraulic Jump Characteristics in U-Shaped Channel | ||
| Civil Engineering Infrastructures Journal | ||
| دوره 59، شماره 1، شهریور 2026، صفحه 255-268 اصل مقاله (661.31 K) | ||
| نوع مقاله: Technical Notes | ||
| شناسه دیجیتال (DOI): 10.22059/ceij.2024.374899.2046 | ||
| نویسنده | ||
| Sumit Gandhi* | ||
| Professor, Department of Civil Engineering, Jaypee University of Engineering and Technology, Guna (MP), India. | ||
| چکیده | ||
| Typical supercritical flow characteristics like, sequent depth ratio, relative jump height, relative energy loss, efficiency of jump, relative prejump depth, relative postjump depth, relative length of the roller and jump in the U-shaped channel are experimentally studied. Based on the experimental findings, physical theories for the variance in these characteristics concerning the Froude number are presented. Empirical models are developed considering the influence of inflow Froude number varying between 4 and 20 and Reynolds number between 1,638,009 and 3,394,784. Some models were also validated and yielded satisfactory results with good R2 values. For comparison and a deeper comprehension of hydraulic jump characteristics, computational multivariate statistical techniques like Principal Component Analysis (PCA) and Factor Analysis (FA) are applied. These techniques are used to identify patterns in an effort to explain the variation in a sizable set of closely related jump characteristics. Verifiers for the different principal components were analyzed, and verifactor VF1 (with 64 %) had strong positive loadings on the sequent depth ratio, the relative jump height, the relative energy loss, the relative length of the roller and jump, while VF2 (with 33%) had strong positive loadings on the relative prejump depth and the relative postjump depth and moderate positive loading on the efficiency of jump. These statistical methods proved to be valuable tools for identifying the key characteristics of a phenomenon and its relative significance. | ||
| کلیدواژهها | ||
| Super Critical Flow؛ U-Shaped Channel؛ Empirical Modeling؛ Principal Component Analysis؛ Factor Analysis | ||
| مراجع | ||
|
Achour, B. and Debabeche, M. (2003). “Control of hydraulic jump by sill in a U-shaped channel”, Journal of Hydraulic Research, 41(1), 97-103, https://www.researchgate.net/publication/283527926_Control_of_hydraulic_jump_by_sill_in_a_U-shaped_channel.
Azimi, H. and Shabanlou, S. (2019). “The effect of Froude number on flow field of u-shaped channel along a side weir in supercritical flow regime”, Computational Mathematics and Modeling, 30, 254-266, https://doi.org/10.1007/s10598-019-09452-z.
Bagheri, H., Heidarpour, M. and Noghani, F. (2023). “Laboratory investigations on hydraulic jump characteristics using submerged vanes and adverse slope”, Journal of Hydro-environment Research, 51, 15-24, https://doi.org/10.1016/j.jher.2023.09.002.
Belanger, J.B. (1849). “Notes surle Cours d’hydraulique”, Paris, France, 222, 1849-1850, https://www.scirp.org/reference/referencespapers?referenceid=2642385.
Bidone, G. (1819). “Observation on height of hydraulic jump: a report presented in december 12”, Meeting of the Royal Academy of Science, Turin.
Bradley, J.N. and Peterka, A.J. (1957). “Hydraulic design of stilling basins: stilling basin with sloping apron (basin v)”, Journal of Hydraulics Division, 83(5), 1-32, https://doi.org/10.1061/JYCEAJ.0000118.
Bretz, N. (1987). “Ressaut hydraulique force par seuil”, Ph.D. Thesis, Ecole Polytechnique federale de Laussane, Switzerland, https://doi.org/10.5075/epfl-thesis-699.
Bushra, A., Afzal, N. (2006). “Hydraulic jump in circular and U-shaped channels”, Journal of Hydraulic Research, 44(4), 567-576, https://doi.org/10.1080/00221686.2006.9521707.
Gandhi, S. (2024). “Empirical modeling of flow characteristics in suddenly expanding channels”, Journal of Applied Fluid Mechanics (JAFM), 17(4), 857-869, https://doi.org/10.47176/jafm.17.4.2213.
Gandhi, S., Murthy, Y.I. and Singh, R.P. (2024). “Response surface method approach for analysing flow characteristics in an expanding channel”, Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics, 177(2), 41-54, https://doi.org/10.1680/jencm.24.00014.
Gandhi, S. and Singh, R.P. (2016). “Empirical formulation of flow characteristics in trapezoidal channels”, Journal of The Institution of Engineers (India), Springer, 97, 247-253, https://doi.org/10.1007/s40030-016-0153-3.
Gargano, R. and Hager, W.H. (2002). “Undular hydraulic jump in circular conduits”, Journal of Hydraulic Engineering, 12(11), 1008-1013, https://doi.org/10.1061/(ASCE)0733-9429(2002)128:11(1008).
Ghaderi, A., Abbasi, S., Abraham, J. and Azamathulla, H.M. (2020). “Efficiency of trapezoidal labyrinth shaped stepped spillways”, Flow Measurement and Instrumentation, 72, 101711, https://doi.org/j.flowmeasinst.2020.101711.
Hager, W.H. (1987). “Abfluss im u-profil”, Korrespondenz Abwasser, 34(5), 468-482, https://infoscience.epfl.ch/entities/publication/449f8576-6b40-4b8e-8b7a-2804649feb2e.
Hager, W.H. (1989). “Hydraulic jump in u‐shaped channel”, Journal of Hydraulic Engineering, 115(5), 667-675, https://doi.org/10.1061/(ASCE)0733-9429(1989)115:5(667).
Helena, B., Padro, R., Vega, M., Barrado, E., Fernandez, J.M. and Fernandez, L. (2000). “Temporal evolution of groundwater composition in an alluvial aquifer (Pisuerga river, Spain) by principal component analysis”, Water Research, 34(3), 807-816, https://doi.org/10.1016/S0043-1354(99)00225-0.
Hu, R. and Zhang, J. (2018). “Numerical analysis on hydraulic characteristics of u-shaped channel of various trapezoidal cross-sections”, Water, 10(12), 1788, https://doi.org/10.3390/w10121788.
Jayant, H.K. and Jhamnani, B. (2023). “Numerical simulation of free and submerged hydraulic jump over trapezoidal and triangular macroroughness”, Heliyon, 9(11), e22540, https://doi.org/10.1016/j.heliyon.2023.e22540.
Lin, Y.T., Yang, Y,. Chiu, Y.J. and Ji, X. (2021). “Hydrodynamic characteristics of flow in a strongly curved channel with gravel beds”, Water, 13(11), 1519, https://doi.org/10.3390/w13111519.
Maryami, E., Mohammadpour, R., Beirami, M.K. and Torabi Haghighi, A. (2021). “Prediction of hydraulic jump characteristics in a closed conduit using numerical and analytical methods”, Flow Measurement and Instrumentation, 82, 102071, https://doi.org/10.1016/j.flowmeasinst.2021.102071.
Ogarekpe, N.M., Agunwamba, J.C. and Ekpenyong, M.G. (2022). “Dimensionality reduction analysis of the integrated solar and hydraulic jump enhanced waste stabilization pond model parameters”, International Journal of Engineering Research in Africa, Trans Tech Publications Ltd., 58, 95-106, https://doi.org/10.4028/www.scientific.net/jera.58.95.
Parsaie, A., Shareef, S.J.S., Haghiabi, A.H., Irzooki, R.H. and Khalaf, R.M. (2022). “Numerical simulation of flow on circular crested stepped spillway”, Applied Water Science, 12, 215, https://doi.org/10.1007/s13201-022-01737-w.
Rajaratnam, N. and Subramanya, K. (1968). “Hydraulic jumps below abrupt symmetrical expansions”, Journal of Hydraulics Division, ASCE, 94(2), 481-504, https://doi.org/10.1061/JYCEAJ.0001780.
Shi, Zh. and Jin, S. (2022). “Numerical investigation of hydrodynamics in a u-shaped open channel confluence flow with partially emergent rigid vegetation”, Water, 14, 24, 4027. https://doi.org/10.3390/w14244027.
Singh, K.P., Malik, A., Mohan, D. and Sinha, S. (2004). “Multivariate statistical techniques for the evaluation of spatial and temporal variations in water quality of Gomti river (India): a case study”, Water Research, 38(18), 3980-3992, https://doi.org/10.1016/j.watres.2004.06.011.
Stahl, H. and Hager, W.H. (1999). “Hydraulic jump in circular pipes”, Canadian Journal of Civil Engineering, 26(3), 368-373, https://doi.org/10.1139/cjce-26-3-368.
Subramanya, K. (2019). “Flow in open channels”, Tata McGraw Hill, 5th Edition, http://ndl.ethernet.edu.et/bitstream/123456789/74929/1/61.pdf.
Torkamanzad, N., Hosseinzadeh Dalir, A., Salmasi, F. and Abbaspour, A. (2019). “Hydraulic jump below abrupt asymmetric expanding stilling basin on rough bed”, Water, 11(9), 1756, https://doi.org/10.3390/w11091756.
Wang, H., Tang, R., Bai, Z., Liu, S., Sang, W. and Bai, R. (2023). “Prototype air-water flow measurements in D-type hydraulic jumps”, Journal of Hydraulic Research, 61(1), 145-161, https://doi.org/10.1080/00221686.2022.2132310.
Yousefi, F., Mozaffari, J. and Movahed, S.A.M. (2019). “Developing a hydraulic jump length model on horizontal rough beds”, Journal of the South African Institution of Civil Engineering, 61(3), 2-6, https://doi.org/10.17159/2309-8775/2019/v61n3a1. | ||
|
آمار تعداد مشاهده مقاله: 455 تعداد دریافت فایل اصل مقاله: 366 |
||
سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب