تعداد نشریات | 158 |
تعداد شمارهها | 6,240 |
تعداد مقالات | 67,871 |
تعداد مشاهده مقاله | 115,446,323 |
تعداد دریافت فایل اصل مقاله | 90,216,579 |
Removal of microplastics from synthetic wastewater via sono-electrocoagulation process: modeling and optimization by central composite design | ||
Pollution | ||
مقالات آماده انتشار، پذیرفته شده، انتشار آنلاین از تاریخ 22 فروردین 1403 | ||
نوع مقاله: Original Research Paper | ||
شناسه دیجیتال (DOI): 10.22059/poll.2024.369522.2179 | ||
نویسندگان | ||
Mahshid Ghadami1؛ Mahdi asadi-Ghalhari* 2؛ Hassan Izanloo3؛ Shokoufeh Alasvand1؛ fatameh sadat Tabatabaei4؛ Roqiyeh Mostafaloo5؛ Alireza Omidi Oskouei6؛ Nasim Ghafouri7 | ||
1Student Research Committee, Qom University of Medical Sciences, Qom, Iran | ||
2Department of Environmental Health Engineering, Faculty of Health, Research Center for Environmental Pollutants, Qom University of Medical Sciences, Qom, Iran | ||
3Research Center for Environmental Pollutants, Qom University of Medical Sciences, Qom, Iran | ||
4Department of Environmental Health Engineering, Faculty of Health, Qom University of Medical Sciences, Qom, Iran | ||
5Department of Environmental Health Engineering, Student Research Committee, Hamadan University of Medical Sciences, Hamadan, Iran | ||
6Department of Public Health, Faculty of Health, Qom University of Medical Sciences, Qom, Iran | ||
7Department of Environmental Health Engineering, Alborz University of Medical Sciences, Alborz, Iran | ||
چکیده | ||
Wastewater treatment plants are an important pathway for microplastics (MPs) to enter the environment. In recent decades, hybrid treatment technologies such as sono-electrocoagulation have been used to treat various types of wastewater. This study aimed to remove polypropylene microplastics from synthetic wastewater by sono-electrocoagulation process using central composite design. The central composite design was utilized to investigate the relationship among four independent variables including the number of MPs (0.003-0.03 MPs/L), sodium sulfate concentration (180-9000 mol/L), voltage (1-15 V) and reaction time (20-180 min) on the efficiency of polypropylene microplastic. Design Expert 13 software and central composite design method were used to design and analyze the experiments and results. The optimum number of concentration of MPs, sodium sulfate concentration, voltage, and reaction time were found to be 6343.36 MPs/L, 0.0181924 mol/L, 10.0356 V, and 62.21 min, respectively. In optimal conditions, polypropylene removal was found to be %90.34. Central composite design proposed a quadratic model for this process. Adequacy of the model using lack of fit statistical tests values, p-values, and F-values was checked, yielding the values of were 1.76, 0.0001 ˂, 19.51, respectively. The R2, R2 adjusted, R2 predicted values which were 0.9367, 0.8776, 0.6959, respectively. Considering the proper removal efficiency, the sono-electrocoagulation process can be used to remove microplastics. | ||
کلیدواژهها | ||
sono-electrocoagulation؛ microplastic؛ response surface methodology؛ polypropylene | ||
آمار تعداد مشاهده مقاله: 30 |