پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شماره‌ها | 6,236 |
| تعداد مقالات | 67,810 |
| تعداد مشاهده مقاله | 115,287,045 |
| تعداد دریافت فایل اصل مقاله | 90,029,388 |
Fault tree analysis integrated with DFMEA approach and combined AHP-TOPSIS technique to improve product configuration considering reliability and total cost, a real-life case study | ||
| Advances in Industrial Engineering | ||
| مقالات آماده انتشار، پذیرفته شده، انتشار آنلاین از تاریخ 08 اسفند 1402 | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/aie.2024.349699.1850 | ||
| نویسندگان | ||
| Ali Beiki Ashkezari1؛ Mahsa Zokaee2؛ Amir Aghsami3؛ Fariborz Jolai* 1 | ||
| 1School of Industrial and Systems Engineering, College of Engineering, University of Tehran, Tehran, Iran. | ||
| 2School of Industrial and Systems Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| 3School of Industrial Engineering, K. N. Toosi University of Technology (KNTU), Tehran, Iran | ||
| چکیده | ||
| Product configuration plays a vital role in product customization. Customers require products with reasonable cost and reliability, so manufacturers should exchange between reliability and production cost through product configuration. To investigate this problem, a novel combined FTA-DFMEA method is presented that implements integrated AHP-TOPSIS to improve product configuration. In this procedure, customer’s needs and market’s feedbacks are considered to identify possible product failures, and an integrated AHP-TOPSIS is applied in order to select the most crucial potential failure based on some identified and extracted criteria. Then, minimal paths are obtained through fault tree analysis and an inverse search method is done to identify related functions and defective components. Failure modes and effect analysis is implemented to conclude modes of failure, effects, and causes. Subsequently, a combined AHP-TOPSIS method is utilized for ranking failure modes and selecting the most crucial failure mode. Failure modes are addressed according to their importance and corrective actions are carried out to improve product configuration. Suppliers with various policies, reliability, warranty and purchasing costs are considered. In addition, for the first time all configuration models like series, parallel, and joint series-parallel as well as redundancy allocation are taken into consideration. A minimum improvement index is considered, which is determined by the decision-maker based on risk-averseness. Eventually, a case study of a laptop system is introduced to evaluate the practicality of the developed algorithm. The results indicate that the proposed method creates different efficient alternatives for the decision-maker to enhance reliability, total costs, and product configuration. | ||
| کلیدواژه‌ها | ||
| Product configuration؛ Reliability؛ AHP؛ TOPSIS؛ FTA-DFMEA | ||
|
آمار تعداد مشاهده مقاله: 43 |
||