پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شمارهها | 6,240 |
| تعداد مقالات | 67,866 |
| تعداد مشاهده مقاله | 115,400,117 |
| تعداد دریافت فایل اصل مقاله | 90,168,217 |
Parametric Analysis for Torque Prediction in Friction Stir Welding Using Machine Learning and Shapley Additive Explanations | ||
| Journal of Computational Applied Mechanics | ||
| دوره 55، شماره 1، فروردین 2024، صفحه 113-124 اصل مقاله (670 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jcamech.2024.370055.924 | ||
| نویسندگان | ||
| Sif Eddine Belalia* 1، 2؛ Mohamed Serier3؛ Raheem Al-Sabur4 | ||
| 1Departement of Mechanical Engineering, University of Relizane, Relizane, 48000, Algeria. | ||
| 2Industrial Engineering and Sustainable Development Laboratory, Faculty of Science and Technology, University of Relizane, Relizane, Algeria. | ||
| 3Departement of Mechanical Engineering, University of Ain Témouchent Belhadj Bouchaib, Ain Témouchent, Algeria. | ||
| 4Mechanical Department, Engineering College, University of Basrah, Basrah, Iraq. | ||
| چکیده | ||
| Friction Stir Welding (FSW) has revolutionized modern manufacturing with its advantages, such as minimal heat-affected zones and improved material properties. Accurate torque prediction in FSW is crucial for weld quality, process efficiency, and energy conservation. Many researchers achieved models for torque based on experimental research, yet the models were limited to a specific type of material. In recent years, the use of machine learning techniques has increased in industry in general and in welding in particular. In this study, a machine learning model was prepared based on artificial neural networks, and Shapley-Additive Explanations were used to predict the rotational torque from 287 experiments that had been conducted in several previous studies. The achieved model has remarkable predictive performance, with an R-squared of 99.53% and low errors (MAE, MAPE, and RMSE). Moreover, a machine learning polynomial regression was examined for comparisons. A parametric importance analysis revealed that rotational speed, plate thickness, and tilt angle significantly affect torque predictions, while the rest of the variables had minimal importance. | ||
| کلیدواژهها | ||
| Friction stir welding؛ torque prediction؛ Artificial neural network؛ Parametric study | ||
| مراجع | ||
|
[1] R. Gupta, D. Srivastava, M. Sahu, S. Tiwari, R. K. Ambasta, P. Kumar, Artificial intelligence to deep learning: machine intelligence approach for drug discovery, Molecular diversity, Vol. 25, pp. 1315-1360, 2021.
[2] F. D. Kakhki, S. A. Freeman, G. A. Mosher, Evaluating machine learning performance in predicting injury severity in agribusiness industries, Safety science, Vol. 117, pp. 257-262, 2019.
[3] H. R. Rohani Raftar, A. Parvizi, Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms, Journal of Computational Applied Mechanics, Vol. 49, No. 2, pp. 292-303, 2018.
[4] D. Narciso, F. Martins, Application of machine learning tools for energy efficiency in industry: a review. Energy Rep. 6, 1181–1199 (2020).
[5] A. Chandola, R. M. Pandey, R. Agarwal, L. Rathour, V. N. Mishra, On some properties and applications of the generalized m-parameter Mittag-Leffler function, Adv. Math. Models Appl, Vol. 7, No. 2, pp. 130-145, 2022.
[6] R. Outa, F. R. Chavarette, V. N. Mishra, A. C. Gonçalves, A. Garcia, S. da Silva Pinto, L. Rathour, L. N. Mishra, Analysis and Prognosis of Failures in Intelligent Hybrid Systems Using Bioengineering: Gear Coupling, The Journal of Engineering and Exact Sciences, Vol. 8, No. 1, pp. 13673-01-18e, 2022.
[7] H. Tourajizadeh, S. Manteghi, S. Nekoo, Numerical and neural network modeling and control of an aircraft propeller, Journal of Computational Applied Mechanics, Vol. 49, No. 1, pp. 63-69, 2018.
[8] N. T. Negero, G. F. Duressa, L. Rathour, V. N. Mishra, A novel fitted numerical scheme for singularly perturbed delay parabolic problems with two small parameters, Partial Differential Equations in Applied Mathematics, Vol. 8, pp. 100546, 2023.
[9] M. Sharma, A. Sadhna, S. K. Bhargava, L. Rathour, L. N. Mishra, S. Pandey, A fermatean fuzzy ranking function in optimization of intuitionistic fuzzy transportation problems, Advanced Mathematical Models & Applications, Vol. 7, No. 2, pp. 191-204, 2022.
[10] M. S. Hogeme, M. M. Woldaregay, L. Rathour, V. N. Mishra, A stable numerical method for singularly perturbed Fredholm integro differential equation using exponentially fitted difference method, Journal of Computational and Applied Mathematics, Vol. 441, pp. 115709, 2024.
[11] M. Sharma, N. Dhiman, S. Kumar, L. Rathour, V. N. Mishra, Neutrosophic Monte Carlo simulation approach for decision making in medical diagnostic process under uncertain environment, Int J Neutrosophic Sci, Vol. 22, No. 1, pp. 08-16, 2023.
[12] W. Cai, J. Wang, L. Cao, G. Mi, L. Shu, Q. Zhou, P. Jiang, Predicting the weld width from high-speed successive images of the weld zone using different machine learning algorithms during laser welding, Math. Biosci. Eng, Vol. 16, No. 5, pp. 5595-5612, 2019.
[13] K. Rameshkumar, A. Vignesh, P. G. Chandran, V. Kirubakaran, J. Sankaran, A. Sumesh, Machine learning models for weld quality monitoring in shielded metal arc welding process using arc signature features, SAE International Journal of Materials and Manufacturing, Vol. 15, No. 05-15-04-0023, pp. 347-365, 2022.
[14] Z. Zhou, H. Shen, B. Liu, W. Du, J. Jin, Thermal field prediction for welding paths in multi-layer gas metal arc welding-based additive manufacturing: A machine learning approach, Journal of Manufacturing Processes, Vol. 64, pp. 960-971, 2021.
[15] A. S. Bahedh, A. Mishra, R. Al-Sabur, A. K. Jassim, Machine learning algorithms for prediction of penetration depth and geometrical analysis of weld in friction stir spot welding process, Metallurgical Research & Technology, Vol. 119, No. 3, pp. 305, 2022.
[16] B. Zhou, T. Pychynski, M. Reischl, E. Kharlamov, R. Mikut, Machine learning with domain knowledge for predictive quality monitoring in resistance spot welding, Journal of Intelligent Manufacturing, Vol. 33, No. 4, pp. 1139-1163, 2022.
[17] H. Sun, P. Ramuhalli, R. E. Jacob, Machine learning for ultrasonic nondestructive examination of welding defects: A systematic review, Ultrasonics, Vol. 127, pp. 106854, 2023.
[18] A. Chikh, M. Serier, R. Al-Sabur, A. Siddiquee, N. Gangil, Thermal Modeling of Tool-Work Interface during Friction Stir Welding Process, Russian Journal of Non-Ferrous Metals, Vol. 63, No. 6, pp. 690-700, 2022.
[19] Z. Fu, D. He, H. Wang, Friction stir welding of aluminum alloys, Journal of Wuhan University of Technology-Materials Science Edition, Vol. 19, No. 1, pp. 61-64, 2004.
[20] R. Al-Sabur, Tensile strength prediction of aluminium alloys welded by FSW using response surface methodology–Comparative review, Materials Today: Proceedings, Vol. 45, pp. 4504-4510, 2021.
[21] W. H. Khalafe, E. L. Sheng, M. R. Bin Isa, A. B. Omran, S. B. Shamsudin, The Effect of Friction Stir Welding Parameters on the Weldability of Aluminum Alloys with Similar and Dissimilar Metals, Metals, Vol. 12, No. 12, pp. 2099, 2022.
[22] A. Asmare, R. Al-Sabur, E. Messele, Experimental investigation of friction stir welding on 6061-T6 aluminum alloy using Taguchi-Based GRA, Metals, Vol. 10, No. 11, pp. 1480, 2020.
[23] M. S. M. Isa, K. Moghadasi, M. A. Ariffin, S. Raja, M. R. bin Muhamad, F. Yusof, M. F. Jamaludin, N. bin Yusoff, M. S. bin Ab Karim, Recent research progress in friction stir welding of aluminium and copper dissimilar joint: a review, Journal of Materials Research and Technology, Vol. 15, pp. 2735-2780, 2021.
[24] R. K. Al-Sabur, A. K. Jassim, Friction stir spot welding applied to weld dissimilar metals of AA1100 Al-alloy and C11000 copper, in Proceeding of, IOP Publishing, pp. 012087.
[25] Y. Chen, J. Xie, W. Cao, Research on friction stir welded joints of Copper to Magnesium alloy, in Proceeding of, Atlantis Press, pp. 310-315.
[26] S. Jana, Y. Hovanski, G. J. Grant, Friction stir lap welding of magnesium alloy to steel: a preliminary investigation, Metallurgical and Materials Transactions A, Vol. 41, pp. 3173-3182, 2010.
[27] H. I. Khalaf, R. Al-Sabur, H. A. Derazkola, Effect of number of tool shoulders on the quality of steel to magnesium alloy dissimilar friction stir welds, Archives of Civil and Mechanical Engineering, Vol. 23, No. 2, pp. 125, 2023.
[28] Y. Huang, X. Meng, Y. Xie, L. Wan, Z. Lv, J. Cao, J. Feng, Friction stir welding/processing of polymers and polymer matrix composites, Composites Part A: Applied Science and Manufacturing, Vol. 105, pp. 235-257, 2018.
[29] R. Al-Sabur, M. Serier, A. Siddiquee, Analysis and construction of a pneumatic-powered portable friction stir welding tool for polymer joining, Advances in Materials and Processing Technologies, pp. 1-15, 2023.
[30] H. Aghajani Derazkola, N. Kordani, R. Mohammadi Abokheili, Investigation of joining mechanism of electrical-assist friction stir joining between polyethylene (PE) and 316 stainless steel, Archives of Civil and Mechanical Engineering, Vol. 22, No. 4, pp. 1-13, 2022.
[31] S. Senthil, M. Bhuvanesh Kumar, M. S. Dennison, A Contemporary Review on Friction Stir Welding of Circular Pipe Joints and the Influence of Fixtures on This Process, Advances in Materials Science and Engineering, Vol. 2022, 2022.
[32] M. Costa, D. Verdera, J. Costa, C. Leitao, D. Rodrigues, Influence of pin geometry and process parameters on friction stir lap welding of AA5754-H22 thin sheets, Journal of Materials Processing Technology, Vol. 225, pp. 385-392, 2015.
[33] S. Cui, Z. Chen, J. Robson, A model relating tool torque and its associated power and specific energy to rotation and forward speeds during friction stir welding/processing, International Journal of Machine Tools and Manufacture, Vol. 50, No. 12, pp. 1023-1030, 2010.
[34] J. Qian, J. Li, J. Xiong, F. Zhang, W. Li, X. Lin, Periodic variation of torque and its relations to interfacial sticking and slipping during friction stir welding, Science and Technology of welding and Joining, Vol. 17, No. 4, pp. 338-341, 2012.
[35] L. Shi, C. Wu, Z. Sun, An integrated model for analysing the effects of ultrasonic vibration on tool torque and thermal processes in friction stir welding, Science and Technology of Welding and Joining, Vol. 23, No. 5, pp. 365-379, 2018.
[36] J. W. Pew, T. W. Nelson, C. D. Sorensen, Development of a torque-based weld power model for friction stir welding, Friction Stir Welding and Processing IV, pp. 73-82, 2007.
[37] H. Su, C. S. Wu, A. Pittner, M. Rethmeier, Simultaneous measurement of tool torque, traverse force and axial force in friction stir welding, Journal of Manufacturing processes, Vol. 15, No. 4, pp. 495-500, 2013.
[38] J. Yan, M. A. Sutton, A. P. Reynolds, Process–structure–property relationships for nugget and heat affected zone regions of AA2524–T351 friction stir welds, Science and Technology of Welding and Joining, Vol. 10, No. 6, pp. 725-736, 2005.
[39] T. Long, W. Tang, A. P. Reynolds, Process response parameter relationships in aluminium alloy friction stir welds, Science and technology of welding and joining, Vol. 12, No. 4, pp. 311-317, 2007.
[40] M. Costa, C. Leitão, D. Rodrigues, Parametric study of friction stir welding induced distortion in thin aluminium alloy plates: A coupled numerical and experimental analysis, Thin-Walled Structures, Vol. 134, pp. 268-276, 2019.
[41] K. J. Quintana, J. L. L. Silveira, Mechanistic models and experimental analysis for the torque in FSW considering the tool geometry and the process velocities, Journal of Manufacturing Processes, Vol. 30, pp. 406-417, 2017.
[42] K. J. Quintana, M. C. Fonseca, J. L. Silveira, Influence of Pin Shape Geometry on the Torque, Forces, and Residual Stresses in Friction Stir Welding of 5052-H34 Aluminum Alloy, Soldagem & Inspeção, Vol. 27, pp. e2710, 2022.
[43] K. J. Quintana Cuellar, J. L. L. Silveira, Analysis of torque in friction stir welding of aluminum alloy 5052 by inverse problem method, Journal of Manufacturing Science and Engineering, Vol. 139, No. 4, pp. 041017, 2017.
[44] A. Banik, J. Deb Barma, S. C. Saha, Effect of threaded pin tool for friction stir welding of AA6061-T6 at varying traverse speeds: torque and force analysis, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 44, pp. 749-764, 2020.
[45] A. Banik, B. S. Roy, J. D. Barma, S. C. Saha, An experimental investigation of torque and force generation for varying tool tilt angles and their effects on microstructure and mechanical properties: Friction stir welding of AA 6061-T6, Journal of Manufacturing Processes, Vol. 31, pp. 395-404, 2018.
[46] C. Jonckheere, B. de Meester, A. Denquin, A. Simar, Torque, temperature and hardening precipitation evolution in dissimilar friction stir welds between 6061-T6 and 2014-T6 aluminum alloys, Journal of materials processing technology, Vol. 213, No. 6, pp. 826-837, 2013.
[47] M. Reza-E-Rabby, A. P. Reynolds, Effect of tool pin thread forms on friction stir weldability of different aluminum alloys, Procedia Engineering, Vol. 90, pp. 637-642, 2014.
[48] U. Acharya, B. S. Roy, S. C. Saha, Torque and force perspectives on particle size and its effect on mechanical property of friction stir welded AA6092/17.5 SiCp-T6 composite joints, Journal of Manufacturing Processes, Vol. 38, pp. 113-121, 2019.
[49] P. Upadhyay, A. P. Reynolds, Effects of thermal boundary conditions in friction stir welded AA7050-T7 sheets, Materials Science and Engineering: A, Vol. 527, No. 6, pp. 1537-1543, 2010.
[50] V. Buchibabu, G. Reddy, A. De, Probing torque, traverse force and tool durability in friction stir welding of aluminum alloys, Journal of Materials Processing Technology, Vol. 241, pp. 86-92, 2017.
[51] M. Mehta, A. Arora, A. De, T. DebRoy, Tool geometry for friction stir welding—optimum shoulder diameter, Metallurgical and Materials Transactions A, Vol. 42, pp. 2716-2722, 2011.
[52] M. Peel, A. Steuwer, P. Withers, T. Dickerson, Q. Shi, H. Shercliff, Dissimilar friction stir welds in AA5083-AA6082. Part I: Process parameter effects on thermal history and weld properties, Metallurgical and Materials Transactions A, Vol. 37, pp. 2183-2193, 2006.
[53] H. Jia, K. Wu, Y. Sun, F. Hu, G. Chen, Evaluation of axial force, tool torque and weld quality of friction stir welded dissimilar 6061/5083 aluminum alloys, CIRP Journal of Manufacturing Science and Technology, Vol. 37, pp. 267-277, 2022.
[54] S. Agatonovic-Kustrin, R. Beresford, Basic concepts of artificial neural network (ANN) modeling and its application in pharmaceutical research, Journal of pharmaceutical and biomedical analysis, Vol. 22, No. 5, pp. 717-727, 2000.
[55] S. M. Lundberg, S.-I. Lee, A unified approach to interpreting model predictions, Advances in neural information processing systems, Vol. 30, 2017.
[56] E. Štrumbelj, I. Kononenko, Explaining prediction models and individual predictions with feature contributions, Knowledge and information systems, Vol. 41, pp. 647-665, 2014.
[57] M. T. Ribeiro, S. Singh, C. Guestrin, " Why should i trust you?" Explaining the predictions of any classifier, in Proceeding of, 1135-1144.
[58] Y. J. Levy, E. Solan, Stochastic games, Complex Social and Behavioral Systems: Game Theory and Agent-Based Models, pp. 229-250, 2020. | ||
|
آمار تعداد مشاهده مقاله: 188 تعداد دریافت فایل اصل مقاله: 286 |
||