پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,573 |
| تعداد مقالات | 71,036 |
| تعداد مشاهده مقاله | 125,507,366 |
| تعداد دریافت فایل اصل مقاله | 98,771,100 |
Influence of Variation of Soil Properties in Bearing Capacity and Settlement Analysis of a Strip Footing Using Random Finite Element Method | ||
| Civil Engineering Infrastructures Journal | ||
| دوره 57، شماره 2، اسفند 2024، صفحه 383-403 اصل مقاله (551.78 K) | ||
| نوع مقاله: Technical Notes | ||
| شناسه دیجیتال (DOI): 10.22059/ceij.2023.360871.1930 | ||
| نویسندگان | ||
| Vinay KUMAR1؛ Avijit Burman2؛ F. H. M. Portelinha3؛ Manish Kumar* 4؛ Guru Das5 | ||
| 1Ph.D. Instructor, Department of Civil Engineering-DECiv, Universidad Federal de Sao Carlos, Sao Carlos-SP, Brazil. | ||
| 2Professor, Department of Civil Engineering, National Institute of Technology, Patna, India | ||
| 3Professor, Department of Civil Engineering-DECiv, Universidad Federal de Sao Carlos, Sao Carlos-SP, Brazil. | ||
| 4Assistant Professor , Department of Civil Engineering, SRM Institute of Science and technology (SRMIST) Tiruchirappalli, TN, India. | ||
| 5Ph.D. Candidate, Research Scholar, Department of Civil Engineering, NIT Patna, India. | ||
| چکیده | ||
| This study analyzes bearing capacity and settlement for a strip footing at the proposed nit Patna Bihta campus site. It uses the Random Finite Element Method (RFEM) based software, which combines viscoplastic finite element analysis with random field theory. The program generates random realizations of the soil domain using local average subdivision method. The average response of the soil domain with variable properties is estimated using Monte-Carlo simulation. The study assumes random variation of soil parameters like cohesion, friction angle, and elastic modulus, while Poisson’s ratio and dilation angle are treated as deterministic variables. The study also considers the cross correlation between cohesion and friction angle. For no cross correlation, theoretical predictions are made for mean and standard deviation of bearing capacity which are verified using Monte Carlo simulation based RFEM results. The probability of bearing capacity failure is also calculated using random finite element analysis and compared with theoretical results. The stochastic analysis of bearing capacity problem indicates that conservative results can be obtained with Prandtl’s bearing capacity formula with consideration correlation length equal to the width of the footing. In settlement analysis, elastic settlement of strip footing on spatially variable soil is presented. Locally averaged log normally distributed random fields of elastic modulus are generated to conduct probabilistic settlement analysis using RFEM and it is seen that there is very good agreement between the predicted and the actual value of settlement at small and large correlation lengths. It is concluded that RFEM is a very suitable and efficient tool for investigation of the effect of variation of soil properties in determining the overall mean response for the bearing capacity and settlement behavior. | ||
| کلیدواژهها | ||
| Bearing Capacity Analysis؛ Settlement Analysis؛ Mohr-Coulomb Yield Criteria؛ Random Finite Element Method؛ Monte Carlo Simulation | ||
| مراجع | ||
|
Arel, E. and Mert, A.C. (2021). “Field simulation of settlement analysis for shallow foundation using cone penetration data”, Probabilistic Engineering Mechanics, 66, 103169, https://doi.org/10.1016/j.probengmech.2021.103169.
Bendriss, F. and Harichane, Z. (2023). “Reliability-based analysis of seismic bearing capacity of shallow strip footings resting on soils with randomly varying geotechnical and earthquake parameters”, Soils and Rocks, 47, e2024078821, https://doi.org/10.28927/SR.2024.078821.
Chwala, M. (2019). “Undrained bearing capacity of spatially random soil for rectangular footings”, Soil sand Foundations, 59(5), 15081521, https://doi.org/10.1016/j.sandf.2019.07.005.
Das, G., Burman, A., Bardhan, A., Kumar, S., Chaudhary, S.S. and Samui, P. (2022). “Risk estimation of soil slope stability problems”, Arabian Journal of Geosciences, 15(2), 204, https://doi.org/10.1007/s12517-022-09528-y.
Der Kiureghian, A. and Ke, J.B. (1988). “The stochastic finite element method in structural reliability”, Probabilistic Engineering Mechanics, 3(2), 8391, https://doi.org/10.1016/02668920(88)90019-7
Fenton, G.A. and Griffiths, D.V. (2008). “Risk assessment in geotechnical engineering”, In Risk Assessment in Geotechnical Engineering (Vol. 461), John Wiley and Sons, New York, https://doi.org/10.1002/9780470284704
Fenton, G.A. and Vanmarcke, E.H. (1990). “Simulation of random fields via local average subdivision”, Journal of Engineering Mechanics, 116(8), 17331749, https://doi.org/10.1061/(asce)07339399(1990)116:(1733).
Haldar, A. and Mahadevan, S. (2000). Reliability assessment using stochastic finite element analysis, John Wiley and Sons, New York.
Halder, K. and Chakraborty, D. (2022). “Probabilistic response of strip footing on reinforced soil slope”, Risk, Reliability and Sustainable Remediation in the Field of Civil and Environmental Engineering, 116, 333358, https://doi.org/10.1016/B978-0-323-85698-0.00021-6.
He, P., Fenton, G.A. and Griffiths, D.V. (2023). “Load and resistance factor design versus reliability-based design of shallow foundations”, Georisk, 17(2), 277286. https://doi.org/10.1080/17499518.2022.2083179.
Jamshidi-Chenari, R., Pourvahedi-Roshandeh, S. and Payan, M. (2019). “Stochastic analysis of foundation immediate settlement on heterogeneous spatially random soil considering mechanical anisotropy”, SN Applied Sciences, 1(7), 1-15, https://doi.org/10.1007/s42452-019-0684-0.
Javankhoshdel, S. and Bathurst, R.J. (2015). “Influence of cross correlation between soil parameters on probability of failure of simple cohesive and c-ϕ slopes”, Canadian Geotechnical Journal, 53(5), 839-853, https://doi.org/10.1139/cgj-2015-0109.
Jimenez, R. and Sitar, N. (2009). “The importance of distribution types on finite element analyses of foundation settlement”, Computers and Geotechnics, 36(3), 474483, https://doi.org/10.1016/j.compgeo.2008.05.003
Johari, A., Pour, J.R. and Javadi, A. (2015). “Reliability analysis of static liquefaction of loose sand using the random finite element method”, Engineering Computations, 32(7), 2100-2119, https://doi.org/10.1108/EC-07-2014-0152.
Johari, A. and Talebi, A. (2021). “Stochastic analysis of piled-raft foundations using the random Finite-Element method”, International Journal of Geomechanics, 21(4), 4021020, https://doi.org/10.1061/(asce)gm.19435622.0001966.
Kawa, M., and Pula, W. (2020). “3D bearing capacity probabilistic analyses of footings on spatially variable c-φ soil”, Acta Geotechnical, 15(6), 1453-1466, https://doi.org/10.1007/s11440-019-00853-3.
Kumar, D.R., Samui, P., Wipulanusat, W., Keawsawasvong, S., Sangjinda, K. and Jitchaijaroen, W. (2023). “Soft-computing techniques for predicting seismic bearing capacity of strip footings in slopes”, Buildings, 13(6), 1371, https://doi.org/10.3390/buildings13061371.
Kumar, V., Burman, A. and Kumar, M. (2023). “Generic form of stability charts using slide software for rock slopes based on the Hoek-Brown failure criterion”, Multiscale and Multidisciplinary Modeling, Experiments and Design, 7(2), 975-989, https://doi.org/10.1007/S41939-023-00265-7/METRICS.
Liu, X., Tang, X. and Li, D. (2020). “Efficient Bayesian characterization of cohesion and friction angle of soil using parametric bootstrap method”, Bulletin of Engineering Geology and the Environment, 80(2), 1809-1828, https://doi.org/10.1007/s10064-020-01992-8.
Luo, N. and Bathurst, R.J. (2018). “Deterministic and random FEM analysis of full-scale unreinforced and reinforced embankments”, Geosynthetics International, 25(2), 164179, https://doi.org/10.1680/jgein.17.00040.
Luo, N. and Luo, Z. (2021). “Reliability analysis of embedded strip footings in rotated anisotropic random fields”, Computers and Geotechnics, 138, 104338, https://doi.org/10.1016/j.compgeo.2021.104338.
Mellah, R., Auvinet, G. and Masrouri, F. (2000). “Stochastic finite element method applied to non-linear analysis of embankments”, Probabilistic Engineering Mechanics, 15(3), 251-259, https://doi.org/10.1016/S0266-8920(99)00024-7.
Mofidi Rouchi, J., Farzaneh, O. and Askari, F. (2014). “Bearing capacity of strip footings near slopes using lower bound limit analysis”, Civil Engineering Infrastructures Journal, 47(1), 89-109, https://doi.org/10.7508/ceij.2014.01.007.
Pan War, V. and Dutta, R.K. (2023). “Development of bearing capacity equation for rectangular footing under inclined loading on layered sand”, Civil Engineering Infrastructures Journal, 56(1), 173192, https://doi.org/10.22059/CEIJ.2022.339138.1819.
Pieczynska, J., Pula, W., Griffiths, D.V. and Fenton, G.A. (2011). “Probabilistic characteristics of strip footing bearing capacity evaluated by random finite element method”, Proceedings of the 11th International Conference on Applications of Statistics and Probability in Soil and Structural Engineering (ICASP), Zurich, 10.
Pieczynska-Kozlowska, J. and Vessia, G. (2022). “Spatially variable soils affecting geotechnical strip foundation design”, Journal of Rock Mechanics and Geotechnical Engineering, 14(3), 886-895, https://doi.org/10.1016/j.jrmge.2021.10.010.
Pramanik, R., Baidya, D.K. and Dhang, N. (2019). “Implementation of fuzzy reliability analysis for elastic settlement of strip footing on sand considering spatial variability”, International Journal of Geomechanics, 19(12), 4019126, https://doi.org/10.1061/(asce)gm.19435622.000154.
Pula, W. and Griffiths, D.V. (2021). “Transformations of spatial correlation lengths in random fields”, Computers and Geotechnics, 136, 104151, https://doi.org/10.1016/j.compgeo.2021.104151.
Pula, W. and Zaskorski, Ł. (2015). “On some methods in safety evaluation in geotechnics”, Stadia geotechnical et Mechanical, 37(2), 17-32, https://doi.org/10.1515/sgem-2015-0016.
Rezaie Soufi, G., Jamshidi Chenari, R. and Karimpour Fard, M. (2020). “Influence of random heterogeneity of the friction angle on bearing capacity factor Nγ”, Georisk, 14(1), 69-89, https://doi.org/10.1080/17499518.2019.1566554.
Schultze, E. and Menzenbach, E. (1961). “Standard penetration test and compressibility of soils”, Proceedings of the Fifth International Conference on Soil Mechanics and Foundation Engineering, 1, 527-532.
Selmi, M., Kormi, T., Hentati, A. and Bel Hadj A.N. (2019). “Capacity assessment of offshore skirted foundations under HM combined loading using RFEM”, Computers and Geotechnics, 114, 103148, https://doi.org/10.1016/j.compgeo.2019.103148.
Shu, S., Gao, Y., Wu, Y., Ye, Z. and Song, S. (2020). “Bearing capacity and reliability analysis of spud can foundations embedded at various depths based on the non-stationary random finite element method”, Applied Ocean Research, 100, 102182, https://doi.org/10.1016/j.apor.2020.102182.
Sienkiewicz, O.C., Valliappan, S. and King, I.P. (1969). “Elasto‐plastic solutions of engineering problems ‘initial stress’, finite element approach”, International Journal for Numerical Methods in Engineering, 1(1), 75-100.
Sienkiewicz, O.C. and Ormeau, I.C. (1974). “Visco‐plasticity-plasticity and creep in elastic solids a unified numerical solution approach”, International Journal for Numerical Methods in Engineering, 8(4), 821-845.
Sienkiewicz, O.C., Humphson, C. and Lewis, R.W. (1977). “Associated and non-associated visco-plasticity and plasticity in soil mechanics”, Geotechnique, 27(1), 101102, https://doi.org/10.1680/geot.1977.27.1.101.
Smith, I.M., Griffiths, D.V. and Margetts, L. (2013). Programming the finite element method, John Wiley and Sons, London.
Som, M.N. and Das, S.C. (2003). Theory and practice of foundation design, PHI Learning Pvt, Ltd., Delhi, India.
Tan, X., Hu, X. and Wu, K. (2009). “Fuzzy random finite element reliability analysis of slope stability with fuzzy basic variables and fuzzy states”, Yanshilixue Yu Gongcheng Xuebao/ Chinese Journal of Rock Mechanics and Engineering, 28 (SUPPL. 2), 3952-3958.
Terzaghi, K. (1943). Theoretical soil mechanics, John Wiley and Sons, New York.
Teshager, D.K., Chwała, M. and Puła, W. (2023). “Probabilistic foundation settlement using a hardening soil model on layered and spatially variable soil”, In GeoRisk 2023, (pp. 447453), https://doi.org/10.3850/978-981-18-51841ms-13-189-cd.
Viviescas, J.C., Mattos, A.J. and Osorio, J.P. (2021). “Uncertainty quantification in the bearing capacity estimation for shallow foundations in sandy soils”, Georisk, 15(3), 182195, https://doi.org/10.1080/17499518.2020.1753782.
Zhang, Q.L. and Peil, U. (1997). “Random finite element analysis for stochastically responses of structures”, Computers and Structures, 62(4), 611-616, https://doi.org/10.1016/S0045-7949(96)00246-5. | ||
|
آمار تعداد مشاهده مقاله: 250 تعداد دریافت فایل اصل مقاله: 314 |
||
سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب