پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,573 |
| تعداد مقالات | 71,036 |
| تعداد مشاهده مقاله | 125,507,220 |
| تعداد دریافت فایل اصل مقاله | 98,771,036 |
Dynamic Analysis of Thermal Crack Propagation in Roller-Compacted Concrete Dams Considering Rotational Component of Ground Motion | ||
| Civil Engineering Infrastructures Journal | ||
| دوره 57، شماره 2، اسفند 2024، صفحه 287-302 اصل مقاله (1.28 M) | ||
| نوع مقاله: Research Papers | ||
| شناسه دیجیتال (DOI): 10.22059/ceij.2023.361667.1935 | ||
| نویسندگان | ||
| Hamidreza Tavakoli* 1؛ Taghi Mofid2؛ Mehdi Dehestani3 | ||
| 1Associate Professor, Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran. | ||
| 2Assistant Professor, Department of Civil Engineering, Urmia University of Technology, Urmia, Iran. | ||
| 3Professor, Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran. | ||
| چکیده | ||
| In the construction of Roller compacted Concrete Dams (RCD), two types of internal and external concrete are used; thermal cracks are occurred due to hydration of various cements in this type of dams. Ignorance of this issue can lead to crack formation in the susceptible points of the dams. In this research, the behavior of the thermal cracks existed in the RCD body, is investigated through translational and rotational components of the earthquake. Three-dimensional Finite Element (FE) model of the concrete dam is built in Abacus software, and the model was subjected to 7 earthquake records. After validation of the model, the propagation of the crack existed in the dam body is evaluated using fracture mechanics criterion. The results of the FE analysis show that the existence of the cracks in the susceptible points of the dam, leads to propagation of these cracks during an earthquake. Especially, with considering the rotational component of the earthquake which has the significant contribution in the obtained values of the crack propagation criterion; this contribution is related to the frequency content of the earthquake, which can lead to an increase of the crack propagation energy up to 50 percent in some earthquake records. | ||
| کلیدواژهها | ||
| Thermal Crack Propagation؛ Finite Element Method؛ Concrete Dam؛ Fracture Mechanics Criterion | ||
| مراجع | ||
|
Abacus-Documentation. (v2021). Abacus theory guide, J-integral evaluation, Dassault Systèmes, http://130.149.89.49:2080/v2016.
Alfatlawi, T.J.M., Kadhim, M.J. and Hussein, M.N. (2021). “Relation between cracks behavior and curvature in cracked concrete arch dam under earthquake”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.02.248.
Carpiuc-Prisacari, A., Poncelet, M., Kazymyrenko, K., Leclerc, H. and Hild, F. (2017). “A complex mixed-mode crack propagation test performed with a 6-axis testing machine and full-field measurements”, Engineering Fracture Mechanics, 176, 1-22, https://doi.org/10.1016/j.engfracmech.2017.01.013.
Chopra, A.K. and Chakraborty, P. (1972). “The earthquake experience at Koyna dam and stresses in concrete gravity dams”, Earthquake Engineering and Structural Dynamics, 1(2), 151-164, https://doi.org/10.1002/eqe.4290010204.
Chopra, A.K. and Chakraborti, P. (1973). “The Koyna earthquake and the damage to Koyna dam”, Bulletin of the Seismological Society of America, 63(2), 381-397.
Data, T.K. (2010). Seismic analysis of structures, John Wiley and Sons (Asia) Pte Ltd.,
De la Lira, J.C. and Chopra, A.K. (1994). “Accidental torsion in buildings due to stiffness uncertainty”, Earthquake Engineering and Structural Dynamics, 23(2), 117-136, https://doi.org/10.1002/eqe.4290230202.
El‐Aide, B. and Hall, J.F. (1989). “Non‐linear earthquake response of concrete gravity dams Part 1: Modelling”, Earthquake Engineering and Structural Dynamics, 18(6), 837951, https://doi.org/10.1002/eqe.4290180607.
Gdoutos, E.E. (2012). Fracture mechanics criteria and applications, Part of the book series: Engineering Applications of Fracture Mechanics (EAFM), (Vol. 10), Springer Science and Business Media.
Ghafory‐Ashtiany, M. and Singh, M.P. (1986). “Structural response for six correlated earthquake components”, Earthquake Engineering and Structural Dynamics, 14(1), 103-119. https://doi.org/10.1002/eqe.4290140108.
Haghani, M., Navayi Neya, B. and Ahmadi, M.T. (2020). “Nonlinear seismic analysis of concrete gravity dams using Extended Finite Element method and Plastic Damage Model”, Modares Civil Engineering Journal, 20(3), 189-201.
Haghani, M., Neya, B.N., Ahmadi, M.T. and Amiri, J.V. (2021). “Comparative study of smeared crack and extended finite element method for predicting the crack propagation in concrete gravity dams”, Journal of Earthquake Engineering, 1-34, https://doi.org/10.1080/13632469.2021.199153.
Haghani, M., Neya, B.N., Ahmadi, M.T. and Amiri, J.V. (2022). A new numerical approach in the seismic failure analysis of concrete gravity dams using extended finite element method”, Engineering Failure Analysis, 132, 105835, https://doi.org/10.1016/j.engfailanal.2021.105835.
Hashempour, S.A., Akbari, R. and Lotfi, V. (2023). “A simplified continuum damage model for nonlinear seismic analysis of concrete arch dams using different damping algorithms”, Civil Engineering Infrastructures Journal, 56(2), 235-255, https://doi.org/10.22059/ceij.2023.342419.1837.
Igel, H., Cochard, A., Wassermann, J., Flaws, A., Schreiber, U., Velikoseltsev, A. and Pham Dinh, N. (2007). “Broad-band observations of earthquake-induced rotational ground motions”, Geophysical Journal International, 168(1), 182-196, https://doi.org/10.1111/j.1365-246X.2006.03146.x.
Igel, H., Schreiber, U., Flaws, A., Schubert, B., Velikoseltsev, A. and Cochard, A. (2005). “Rotational motions induced by the M8, 1 Tokachi‐oki earthquake, September 25, 2003”, Geophysical Research Letters, 32(8), https://doi.org/10.1029/2004GL022336.
Ingraffea, A. (1990). “Case studies of simulation of fracture in concrete dams”, Engineering Fracture Mechanics, 35(1-3), 553-564, https://doi.org/10.1016/0013-7944(90)90230-E.
Koga, H., Katahira, H. and Kawano, H. (2018). “Thermal measurement and analysis of large Roller Compacted Concrete dam”, In: Roller Compacted Concrete Dams, (pp. 1139-1147), Routledge.
Lee, J. and Fenves, G.L. (1998). “Plastic-damage model for cyclic loading of concrete structures”, Journal of Engineering Mechanics, 124(8), 892-900.
Lee, V.W. and Trifunac, M.D. (1985). “Torsional accelerograms”, International Journal of Soil Dynamics and Earthquake Engineering, 4(3), 132-139, https://doi.org/10.1016/0261-7277(85)90007-5.
Li, H.N., Sun, L.Y. and Wang, S.Y. (2004). “Improved approach for obtaining rotational components of seismic motion”, Nuclear Engineering and Design, 232(2), 131-137, https://doi.org/1016/j.nucengdes.2004.05.002.
Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989). “A plastic-damage model for concrete”, International Journal of Solids and Structures, 25(3), 299-326.
Mirzabozorg, H. and Kianoush, M.R. (2008). “Seismic safety evaluation of concrete dams using damage mechanics approach”, The 14th World Conference on Earthquake Engineering, October 12-17, Beijing, China.
Mofid, T. and Tavakoli, H. (2020). “Experimental investigation of post-earthquake behavior of RC beams”, Journal of Building Engineering, 32, 101673, https://doi.org/10.1016/j.jobe.2020.101673.
Mofid, T. and Tavakoli, H. (2023). “Experimental investigation of mechanical behavior of lightweight RC elements under repeated loadings”, Structures, 54, 1608-1622, https://doi.org/10.1016/j.istruc.2023.05.030.
Moradloo, A.J., and Naiji, A. (2020). “Effects of rotational components of earthquake on seismic response of arch concrete dams”, Earthquake Engineering and Engineering Vibration, 19(2), 349-362, https://doi.org/10.1007/s11803-020-0566-x.
Nagataki, S., Fujisawa, T., and Kawasaki, H. (2008). “State of art of RCD dams in Japan”, 50º Congresso Brasileiro do Concreto, Salvado, 1st Brazilian RCC Symposium, September.
Newmark, N.M. (1969). Torsion in symmetrical buildings, IIT Kanpur, https://www.iitk.ac.in/nicee/wcee/article/4_vol2_A3-19.pdf.
Parks, D. (1977). “The virtual crack extension method for nonlinear material behavior”, Computer Methods in Applied Mechanics and Engineering, 12(3), 353-364.
Pirooznia, A. and Moradloo, A. (2020). “Investigation of size effect and smeared crack models in ordinary and dam concrete fracture tests, Engineering Fracture Mechanics, 226, 106863, https://doi.org/1016/j.engfracmech.2019.106863
Priya, M., PriyaPriya, M. and Santhi, A. (2022). “A material model approach on the deflection and crack pattern in different panels of the RCC flat plate using finite element analysis”, Civil Engineering Journal, 8(3), 472-487.
Rescher, O.J. (1990). “Importance of cracking in concrete dams”, Engineering Fracture Mechanics, 35(1-3), 503-524, https://doi.org/10.1016/0013-7944(90)90226-7.
Sadeghi, M.H. and Moradloo, J. (2022). “Seismic analysis of damaged concrete gravity dams subjected to main shock-aftershock sequences”, European Journal of Environmental and Civil Engineering, 26(6), 24172438, https://doi.org/10.1080/1964 889.2020.1763475.
Sato, H., Miyazawa, S., and Yatagai, A. (2015). “Thermal crack estimation of dam concrete considering the influence of autogenous shrinkage”, In CONCREEP 10, (pp. 1289-1298), https://doi.org/https://doi.org/1061/9780784479346.153.
Shah, S. and Kishen, J.C. (2011). “Fracture properties of concrete–concrete interfaces using digital image correlation”, Experimental Mechanics, 51(3), 303-313.
Shih, C., Moran, B. and Nakamura, T. (1986). “Energy release rate along a three-dimensional crack front in a thermally stressed body”, International Journal of Fracture, 30(2), 79-102.
Singh, V. and Sangle, K. (2022). “Analysis of vertically oriented coupled shear wall interconnected with coupling beams”, High-Tech and Innovation Journal, 3(2), 230-242, https://doi.org/10.28991/HIJ-2022-03-02-010.
Soysal, B.F. and Arici, Y. (2023). “Crack width–seismic intensity relationships for concrete gravity dams”, Journal of Earthquake Engineering, 1-17, https://doi.org/10.1080/1363246.2023.2220048.
Takamori, A., Araya, A., Otake, Y., Ishidoshiro, K. and Ando, M. (2009). “Research and development status of a new rotational seismometer based on the flux pinning effect of a superconductor“, Bulletin of the Seismological Society of America, 99(2B), 1174-1180, https://doi.org/10.1785/0120080087.
Teisseyre, R. (2011). “Why rotation seismology: Confrontation between classic and asymmetric theories”, Bulletin of the Seismological Society of America, 101(4), 16831691, https://doi.org/10.1785/0120100078.
Wang, Y.J., Wu, Z.M., Qu, F.M. and Zhang, W. (2022). “Numerical investigation on crack propagation process of concrete gravity dams under static and dynamic loads with in-crack reservoir pressure”, Theoretical and Applied Fracture Mechanics, 117, 103221, https://doi.org/10.1016/j.tafmec.2021.103221.
Wilco Ski, J., Hall, R.L., Gambill, J.B., Mathieu, E.E. and Chowdhury, M.R. (2001). Seismic testing of a 1/20 scale model of Koyna Dam, Experimental Report, US Army Corps of Engineers.
Zhang, M., Li, M., Zhang, J., Liu, D., Hu, Y., Ren, Q. and Tian, D. (2020). “Experimental study on electro-thermal and compaction properties of electrically conductive roller-compacted concrete overwintering layer in high RCC dams”, Construction and Building Materials, 263, 120248, https://doi.org/10.1016/j.conbuildmat.2020.120248.
Zhang, X., Yan, T., Liu, Q., Zhang, X. and Wang, L. (2022). “Cracking analysis of induced joints in roller compacted concrete arch dam”, Alexandria Engineering Journal, 61(5), 3599-3612, https://doi.org/10.1016/j.aej.2021.08.082. | ||
|
آمار تعداد مشاهده مقاله: 189 تعداد دریافت فایل اصل مقاله: 238 |
||
سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب