تقویت توان نگه‏داری پیچ و میخ در چندسازة چوبی با لایه های متقاطع (CLT) ساخته شده از صنوبر (Populus alba) با الیاف شیشه

[1]. Gagnon, S., & Pirvu, C. (2011). CLT handbook: cross-laminated timber. FPInnovations.

[2]. Rostampour Haftkhani, A., Layeghi, M., Ebrahimi, G., & Pourtahmasi, K. (2017). Evaluation of bending performance for cross laminated timber (CLT) made out of poplar (Populus alba). Iranian Journal of Wood and Paper Industries, 8 (1), 67-78.

[3]. Rostampour Haftkhani, A., & Hematabadi, H. (2022). Effect of Layer Arrangement on Bending Strength of Cross-Laminated Timber (CLT) Manufactured from Poplar (Populus deltoides L.). Buildings, 12(5), 608-620

[4]. Abdoli, F., Rashidi, M., Rostampour Haftkhani, A., Layeghi, M., & Ebrahimi, G. (2022). Withdrawal Performance of Nails and Screws in Cross-Laminated Timber (CLT) Made of Poplar (Populus alba) and Fir (Abies alba). Polymers, 14(15): 3129-3142.

[5]. Rostampour Haftkhani, A. (2019). Experimental study on flexural performance of poplar glued-laminated timber constructed by mechanical fastener and comparing them with those made with cold press. Iranian Journal of Wood and Paper Industries, 10(3), 347-360. (In Persian).

[6]. Rostampour Haftkhani, A., Sharari, M., Ahmadi, M., Moezzipour, B., & Shakiba, A. (2020). Flexural performance of cross-laminated timber made out of poplar reinforced with nail and screw. Iranian Journal of Wood and Paper Industries, 11(1), 1-18. (In Persian).

[7]. Rostampour Haftkhani, A. (2020). Effect of reinforcement of the galvanized steel, Aluminum sheet and Glass fiber reinforcement polymer wrapped on flexural behavior of screwed glued laminated timber (glulam) made with poplar. Forest and Wood Products, 72 (4), 327-338. (In Persian).

[8]. Rostampour Haftkhani, A., & Shokrvand Shakiba, A. (2020). Reinforcement of flexural performance of screwed cross laminated timber (CLT) panels constructed of poplar by aluminum sheet and glass fiber reinforced polymer wrap. Forest and Wood Products, 73(3), 317-331. (In Persian).

[9]. Sharari, M., Rostampour Haftkhani, A.k., Ahmadi, M., Moezzipour, B., & Hajializadeh, F. (2022). Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints. Iranian Journal of Wood and Paper Industries, 13(1), 1-14. (In Persian).

[10]. Abukari, M.H., Coté, M., Rogers, C., & Salenikovich, A. (2012). Withdrawal resistance of structural screws in Canadian glued laminated timber. In Proceedings of the World Conference on Timber Engineering. pp: 15-19.

[11]. Khai, T.D., & Young, J.G. (2022). Withdrawal capacity and strength of self-tapping screws on cross-laminated timber. Structures, 37(3), 772-786.

 [12]. Madhoush, M., Grey, M., Tabarsa, T., & Rafighi, A. (2012). Nail and Screw Withdrawal Strength, MOE and MOR in Densified Poplar Wood. Journal of Wood & Forest Science and Technology, 18(4), 45-58. (In Persian).

[13]. Pang, S.J., Ahn, K.S., Kang, S.G., & Oh, J.K., (2020). Prediction of withdrawal resistance for a screw in hybrid cross-laminated timber. Journal of Wood Science, 66(1), 1-11.

[14]. Hoelz, K., Kleinhans, L., & Matthiesen, S. (2021). Wood screw design: influence of thread parameters on the withdrawal capacity. European Journal of Wood and Wood Products, 79(4), 773-784.

[15]. Almeida de, A.C., & Melo Moura, J.D. (2022). Mechanical Behavior of GFRP Dowel Connections to Cross Laminated Timber-CLT Panels. Forests, 13(2), 320-333.

[16]. Durmaz, S., Erdil, Y.Z., and Avcı, E. (2020). Screw withdrawal resistance and surface roughness of woven carbon and glass fiber-reinforced wood-plastic composites. BioResources, 15(1), 1894-1903.