پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شمارهها | 6,232 |
| تعداد مقالات | 67,773 |
| تعداد مشاهده مقاله | 115,238,354 |
| تعداد دریافت فایل اصل مقاله | 89,983,073 |
The effect of high voltage electric pulse on the coarse particle flotation of sulfur-bearing iron ore samples | ||
| International Journal of Mining and Geo-Engineering | ||
| مقاله 9، دوره 57، شماره 3، آذر 2023، صفحه 315-321 اصل مقاله (653.51 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/ijmge.2023.354748.595033 | ||
| نویسندگان | ||
| Vahid Soltanmohammadi* 1؛ Mohammad Noaparast1؛ Soheila Aslani2 | ||
| 1School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran. | ||
| 2School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| چکیده | ||
| In this research, the effect of the high-voltage electric pulse (HVEP) crushing on the flotation of high-sulfur iron ore concentrate in the coarse particle fraction was studied compared to mechanical (conventional) crushing. A jaw crusher, a cone crusher, and a high-voltage electric pulse crushing device with a voltage level of 50 kV were used to investigate the effect of mechanical and electrical crushing. The results showed that a coarser particle product was produced with less slime in primary crushing with electric pulses compared to primary mechanical crushing. It was due to the crushing mechanism, which is based on separating minerals with a different dielectric constant from their connection boundaries and also encompasses a selective separation process. The effect of the mentioned method on coarser fractions led to the creation of cracks/microcracks in particle structures that made grinding easier and faster. In investigating the effect of particle size on pyrite flotation and desulfurization at -300 µm (d80=300µm), the sulfur grade of flotation iron concentrate samples using primary crushing was 0.86% and 0.36%, respectively, and at -150 µm (d80=150µm) fraction, the sulfur grade was found to be 0.33% and 0.19% respectively for mechanical and electrical methods. Also, the sulfur removal (recovery) of the sample with primary electrical crushing was 73.7% at a -300 µm fraction, almost equal to 73.2% at the size range of -150 µm with applying the mechanical method. These results indicated the flotation possibility of coarser particles using electrical crushing and desulfurization similarity to the samples with primary mechanical crushing in finer fractions. | ||
| کلیدواژهها | ||
| High voltage electrical pulses؛ Grindability؛ Coarse particle flotation؛ Desulfurization؛ Iron ore | ||
| مراجع | ||
|
[1] Yu, K.-p., Yu, Y.-f., and Xu, X.-y. (2013). Separation behavior and mechanism of hematite and collophane in the presence of collector RFP-138. Transactions of Nonferrous Metals Society of China, 23(2): p. 501-507. doi: https://doi.org/10.1016 /S1003-6326(13)62491-7 [2] Arol, A.I., & Aydogan, A. (2004). Recovery enhancement of magnetite fines in magnetic separation. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 232(2-3): p. 151-154. doi: https://doi.org/10.1016/j.colsurfa.2003.06.003
3[] F Filippov, L., V. Severov, & Filippova, I. (2014). An overview of the beneficiation of iron ores via reverse cationic flotation. International journal of mineral processing, 127: p. 62-69. doi: https://doi.org/10.1016/j.minpro.2014.01.002
[4] Yu, J., Ge, Y., & Cai, X. (2016). The desulfurization of magnetite ore by flotation with a mixture of xanthate and dixanthogen. Minerals, 6(3): p. 70. doi: https://doi.org/ 10.3390/min6030070 [5] Mathur, S., Singh, P., & Moudgil, B. (2000). Advances in selective flocculation technology for solid-solid separations. International Journal of Mineral Processing, 58(1-4): p. 201-222. doi: https://doi.org/10.1016/S0301-7516(99)00072-1
[6] Mudd, G.M. (2007). The sustainability of mining in Australia: key production trends and their environmental implications. Department of Civil Engineering, Monash University and Mineral Policy Institute, Melbourne.
[7] Araujo, A., Viana, P., & Peres, A. (2005), Reagents in iron ores flotation. Minerals Engineering, 18(2): p. 219-224. doi: https://doi.org/10.1016/j.mineng.2004.08.023
[8] Nakhaei, F. & Irannajad, M. (2018). Reagents types in flotation of iron oxide minerals: A review. Mineral Processing and Extractive Metallurgy Review, 39(2): p. 89-124. doi: https://doi.org/10.1080/08827508.2017.1391245
[9] Carlson, J. & Kawatra, S. (2013). Factors affecting zeta potential of iron oxides. Mineral Processing and Extractive Metallurgy Review, 34(5): p. 269-303. doi: https://doi.org/10.1080/ 08827508.2011.604697 [10] Rao, S.R. (2013). Surface chemistry of froth flotation: Volume 1: Fundamentals. Springer Science & Business Media.
[11] Hassanzadeh, A., et al. (2022). Technological assessments on recent developments in fine and coarse particle flotation systems. Minerals Engineering, 180: p. 107509. doi: https://doi.org/10.1016/j.mineng.2022.107509
[12] Lakshmanan, V.I. & Gorain, B. (2019). Innovations and Breakthroughs in the Gold and Silver Industries: Concepts, Applications and Future Trends. Springer.
[13] Awatey, B., et al. (2013). Optimization of operating parameters for coarse sphalerite flotation in the HydroFloat fluidised-bed separator. Minerals Engineering, 50: p. 99-105. doi: https://doi.org/10.1016/j.mineng.2013.06.015
[14] Nwaila, G.T., et al. (2021). Valorisation of mine waste-Part I: Characteristics of, and sampling methodology for, consolidated mineralised tailings by using Witwatersrand gold mines (South Africa) as an example. Journal of Environmental Management, 295: p. 113013. doi: https://doi.org/10.1016/j.jenvman.2021.113013
[15] Safari, M., Harris, M., & Deglon, D. (2018). The effect of energy input on the flotation of a platinum ore in a pilot-scale oscillating grid flotation cell. Minerals Engineering, 2017. 110: p. 69-74. doi: https://doi.org/10.1016/j.mineng.2017.04.012
[16] Hassanzadeh, A. (2018). A survey on troubleshooting of closed-circuit grinding system. Canadian Metallurgical Quarterly, 57(3): p. 328-340. doi: https://doi.org/10.1080/ 00084433.2018.1464618 [17] Zuo, W., et al. (2020). Effect of high voltage pulse treatment on the surface chemistry and floatability of chalcopyrite and pyrite. Minerals Engineering, 147: p. 106170. doi: https://doi.org/10.1016/j.mineng.2019.106170
[18] Andres, U. (2010). Development and prospects of mineral liberation by electrical pulses. International Journal of Mineral Processing, 97(1-4): p. 31-38. doi: https://doi.org/10.1016/j.minpro.2010.07.004
[19] Yan, G., et al. (2020). Investigating the influence of mineral characteristics on induced effect of high-voltage pulse discharge by synthetic minerals. Minerals Engineering, 153: p. 106380. doi: https://doi.org/10.1016/j.mineng.2020.106380
[20] Shi, F., et al. (2014). A potential application of high voltage pulse technology in a gold-copper ore grinding circuit. IMPC 2014-27th International Mineral Processing Congress, Gecamin Digital Publications.
[21] Shi, F., Zuo, W., & Manlapig, E. (2015). Pre-concentration of copper ores by high voltage pulses. Part 2: Opportunities and challenges. Minerals Engineering, 79: p. 315-323. doi: https://doi.org/10.1016/j.mineng.2015.01.014
[22] Wang, E., Shi, F., & Manlapig, E. (2011). Pre-weakening of mineral ores by high voltage pulses. Minerals Engineering, 24(5): p. 455-462. doi: https://doi.org/10.1016/j.mineng. 2010.12.011 [23] Wang, E., Shi, F., & Manlapig, E. (2012). Mineral liberation by high voltage pulses and conventional comminution with same specific energy levels. Minerals Engineering,. 27: p. 28-36. doi: https://doi.org/10.1016/j.mineng.2011.12.005
[24] Andres, U., Timoshkin, I., & Soloviev, M. (2001). Energy consumption and liberation of minerals in explosive electrical breakdown of ores. Mineral Processing and Extractive Metallurgy, 110(3): p. 149-157. doi: https://doi.org/10.1179/mpm.2001.110.3.149
[25] Razavian, S.M. (2014). Effect of High Voltage Electric Pulses on Phosphate Ore Comminution. PhD Thesis, Amirkabir University of Technology.
[26] Razavian, S.M., Rezai, B., Irannajad, M. (2014) Investigation on Pre-weakening and Crushing of Phosphate Ore Using High Voltage Electric Pulses. Advanced Powder Technology, Vol. 25, pp. 1672-1678. doi: https://doi.org/10.1016/j.apt.2014.06.010
[27] Razavian, S.M., Rezai, B., Irannajad, M. (2015). Finite Element Method Based Simulation of Electrical Breakage of Iron-Phosphate Ore. PPMP Journal, Vol 51 (1), pp. 137-150. doi: http://dx.doi.org/10.5277/ppmp150113
[28] Razavian, S.M., Rezai, B., Irannajad, M., Ravanji, M.H. (2015). Numerical Simulation of High Voltage Electric Pulse Comminution of Phosphate Ore, IJMST, Vol. 25 (3), pp. 473-478. doi: https://doi.org/10.1016/j.ijmst.2015.03.023 | ||
|
آمار تعداد مشاهده مقاله: 162 تعداد دریافت فایل اصل مقاله: 140 |
||