تعداد نشریات | 161 |
تعداد شمارهها | 6,532 |
تعداد مقالات | 70,500 |
تعداد مشاهده مقاله | 124,084,121 |
تعداد دریافت فایل اصل مقاله | 97,188,557 |
Effects of Combining Ultrasonic Waves and Ultraviolet Radiation on Removing 2-Mercaptobenzothiazole from Aqueous Solution: Experimental Design and Modeling | ||
Pollution | ||
دوره 9، شماره 1، فروردین 2023، صفحه 299-315 اصل مقاله (827.47 K) | ||
نوع مقاله: Original Research Paper | ||
شناسه دیجیتال (DOI): 10.22059/poll.2022.347064.1571 | ||
نویسندگان | ||
Shadi Kameli؛ Akbar Mohammadidoust* ؛ Ehsan Jafarbeigi | ||
Department of Chemical Engineering, Kermanshah Branch, Islamic Azad University, Kermanshah, Iran | ||
چکیده | ||
Nowadays, the pollution of sulfur compounds is gradually increasing due to the growing wastewaters and industrial developments. In this study, 2-mercaptobenzothiazole (MBT) removal from aqueous solution has been investigated using the combination of the ultrasonic and UV waves (ultra/UV). The effective parameters include pH, irradiation time, initial concentration of MBT, and volume of hydrogen peroxide at constant temperature of 25 °C. To exact evaluation of the design of experiments (DOE) and analyze of variance (ANOVA), response surface methodology (RSM) was employed. The results revealed that waves’ energy and subsequently cavitation phenomenon and hydroxyl radicals played significant roles in cracking the studied organosulfur’ bonds. In addition, hydrogen peroxide oxidant promoted the sulfur removal in the process. Maximum sulfur removal was numerically optimized as 99.74 that had an absolute error of 1.47% in comparison with the experimental one (98.29). Finally, COD and DO analyses were studied at optimum conditions. The tests confirmed the experimental results, appropriately. Therefore, the combination of the ultrasonic and UV irradiation can be significantly effective on removing organosulfur’s pollutants in industrial wastewaters and related ones. | ||
کلیدواژهها | ||
2-mercaptobenzothiazole؛ Ultra/UV waves؛ response surface methodology؛ modeling؛ optimization | ||
مراجع | ||
Abbasi, M. and Razzaghi, A.N. (2008). Sonochemical degradation of Basic Blue 41 dye assisted by nano TiO2 and H2O2. J. Hazard. Mater., 153, 942–947. Al-Maliki, A. (2004). Desulfurization of gasoline and diesel fuels using non-hydrogen consuming techniques, MSc Thesis, Chemistry Department, King Fahad University of Petroleum and Minerals. Amani, M.; Najafi, I. and Makarem, M.A. (2011). Application of ultrasound waves to increase the efficiency of oxidative desulfurization process. Advances Pet. Explor. Dev., 2, 63–69. Asadi, A.A.; Royaee, S.J.; Alavi, S.M. and Bazmi, M. (2019). Ultra-deep hydrodesulfurization of cracked and atmospheric gasoil blend: direct and interactive impacts of support composition, chelating agent, metal and promoter loadings. Fuel Process. Technol., 187, 36–51. Aysar, T.J.; Ghazwan, S.A.; Ban, A.A. and Iqbal, M.M. (2020). Enhancement of light naphtha quality and environment using new synthetic nano-catalyst for oxidative desulfurization: Experiments and process modeling. Comput. Chem. Eng., 140 , 106869. Baradaran, S. and Sadeghi, M.T. (2020). Desulfurization of non-hydrotreated kerosene using hydrodynamic cavitation assisted oxidative desulfurization (HCAOD) process. J. Environ. Chem. Eng., 8, 103832. Carnaroglio, D.; Gaudino, E.C.; Mantegna. S.; Moreira. E.M.; Castro, A.V.D.; Flores, E.M.M. and Cravotto, G. (2014). Ultrasound-assisted oxidative desulfurization/denitrification of Liquid Fuels with Solid Oxidants. Energy & Fuels, 28 ,1854–1859. Chaijak, P. and Sato, C. (2021). Power recovery and sulfate removal from rubber wastewater with the novel model multi-electrode microbial fuel cell. Pollut., 7(2), 417-424. Chan, N.Y. (2010). Superoxide radical and UV irradiation in ultrasound assisted oxidative desulfurization (UAOD): a potential alternative for green fuels. University of Southern California, Ph.D. thesis. Chen, T.C.; Wan, M.W.; Lee, W.J.; Lin, C.C. and Shen, Y.H. (2009). The study of ultrasound assisted oxidative desulfurization process applied to recovered oil from wasted tires. In: 7th Asia-Pacific Conference on Combustion, National Taiwan University, Taipei, Taiwan 24-27 May. Dejaloud, A.; Habibi, A.; Vahabzadeh, F. and Akbari, E. (2019). Bioenergetic aspects of dibenzothiophene desulfurization by growing cells of Ralstonia eutropha. Pollut., 5(4), 709-719. Duarte, F.A.; Mello, P.A.D.; Bizzi, C.A.; et al. (2011). Sulfur removal from hydrotreated petroleum fractions using ultrasound-assisted oxidative desulfurization process. Fuel, 90 , 2158–2164 Dai, Y.; Qi, Y.; Zhao,. D. and Zhang, H. (2008). An oxidative desulfurization method using ultrasound/Fenton’s reagent for obtaining low and/or ultra-low sulfur diesel fuel. Fuel Process. Technol., 89, 927-932. Ehsani, M.R.; Safadoost, A.R. and Avazzadeh, R. (2013). Kinetic Study of Ethyl Mercaptan Oxidation in Presence of Merox Catalyst. Iran. J. Chem. Chem. Eng., 32, 71-80. Fan, Q.; Zhao, D. and Dai, Y. (2009). The research of ultra-deep desulfurization in diesel via ultrasonic irradiation under the catalytic system of H2O2-CH3COOH-FeSO4. Pet. Sci. Technol., 27, 302–314. Fa-tang, L.; Biao, W.; Rui-hong, L.; Xiao-jing, W.; Lan-ju, C. and Di-shun, Z. (2015). An inexpensive Nmethyl-2-pyrrolidone-based ionic liquid as efficient extractant and catalyst for desulfurization of dibenzothiophene. Chem. Eng. J., 274 , 192–199. Fu, Y.T.; Hai, M. and Hung-Mou, L.S. (2002). Oxidative Desulfurization of Fossil Fuels with Ultrasound. USP0676260. Gaudino, E.C.; Carnaroglio, D.; Boffa, L.; Cravotto, G.; Moreira, E.M.; Nunes, M., et al. (2014). Efficient H2O2/CH3COOH oxidative desulfurization/denitrification of liquid fuels in sonochemical flow-reactors. Ultrason. Sonochem., 21 , 283-288. Ghafoori, S.; Mehrvar, M. and Chan, P.K. (2012) Free-radical-induced degradation of aqueous polyethylene oxide by UV/H2O2: experimental design, reaction mechanisms, and kinetic modeling. Ind. Eng. Chem. Res., 51 , 14980–14993. Ghafoori, S.; Mehrvar, M. and Chan, P.K. (2014). Optimisation of photo-Fenton-like degradation of aqueous polyacrylic acid using Box-Behnken experimental design. Can. J. Chem. Eng., 92 , 97–108. Ghafoori, S.; Mowla, A.; Jahani, R.; Mehrvar, M. and Chan, P.K. (2015). Sonophotolytic degradation of synthetic pharmaceutical wastewater: statistical experimental design and modeling. J. Environ. Manage., 150 , 128–137. Ghahremani, H.; Nasri, Z. and Eikani, M.H. (2021). Ultrasound-assisted oxidative desulfurization (UAOD) of Iranian heavy crude oil: Investigation of process variables. J. Pet. Sci. Eng., 204 , 108709 Goel, M.; Hongqiang, H.; Mujumdar, A.S. and Ray, M.B. (2004). Sonochemical decomposition of volatile and non-volatile organic compounds – a comparative study. Water Res., 38, 4247–4261. Julião, D.; Mirante, F.; Ribeiro, S.O.; Gomes, A.C.; Valença, R., Ribeiro, J.C.; Pillinger, M.; de Castro, B.; Gonçalves, I.S. and Balula, S.S. (2019). Deep oxidative desulfurization of diesel fuels using homogeneous and SBA-15-supported peroxophosphotungstate catalysts. Fuel, 241, 616–624. Karami, E.; Sobati, M.A.; Khodaei, B. and Abdi, K. (2017). An experimental investigation on the ultrasound-assisted oxidation of benzothiophene in model fuel: Application of response surface methodology. Appl. Therm. Eng., 118, 691–702. Liu, W.; Qin, L.; An, Z.; Shi, W.; Chen, L.; Liu, X. and Yang, Y. (2019). Selective adsorption and separation of dibenzothiophene by molecularly imprinted polymer on the surface of porous magnetic carbon nanospheres. Fuller. Nanotub. and Carbon Nanostructures, 27 , 14–22. Loghmani, F.; Mirghaffari, N. and Soleimani, M. (2019). The use of raw and thermally-modified calcareous sluge generated in stone cutting industry for sulfur dioxide removal. Pollut., 5(4), 775-788. Meshkat, S.S.; Dastgerdi, Z.H.; Abkhiz, V. and Shenas, A. H. (2022). High content of sulfur in liquid stream removal via new carbonous nano adsorbent: equilibrium, kinetic study. Pollut., 8(2), 355-372. Mohammadidoust, A.; Rahimi, M. and Feyzi, M. (2015). Effects of solvent addition and ultrasound waves on viscosity reduction of residue fuel oil. Chem. Eng. Process., 95, 353-361. Mohammadidoust, A.; Rahimi, M. and Feyzi, M. (2016). An Optimization Study by Response Surface Methodology (RSM) on Viscosity Reduction of Residue Fuel Oil Exposed Ultrasonic Waves and Solvent Injection. Iran. J. Chem. Eng., 13, 3-19. Montgomery, D.C. (2017). Design and analysis of experiments. John Wiley and Sons, USA. Myers, R.H. and Montgomery, D.C. (2002). Response surface methodology: Process and product optimization using designed experiments, 2nd ed., John Wiley and Sons, USA. Nawaf, A.T.; Jarullah, A.T. and Abdulateef, L.T. (2019). Design of a Synthetic Zinc Oxide Catalyst over Nano-Alumina for Sulfur Removal by Air in a Batch Reactor. Bull. Chem. React. Eng. Catal., 14, 79-92. Okoro, O.V. and Sun, Z. (2019). Desulphurisation of biogas: a systematic qualitative and economic-based quantitative review of alternative strategies. Chem. Eng. J., 3,76-82 Qian, E.W. (2008). Development of novel non-hydrogenation desulfurization process-oxidative desulfurization of distillate. J. Jpn. Pet. Inst., 51 , 14-31. Saharan, V.K.; Badve, M.P. and Pandit, A.B. (2011). Degradation of Reactive Red 120 dye using hydrodynamic cavitation. Chem. Eng. J., 178 , 100-107. Sharifi, K.; Halladj, R.; Royaee, S.J. and Nasr, M.R.J. (2018). Synthesis of W/HZSM-5 catalyst for simultaneous octane enhancement-desulfurization process of gasoline production. Powder Technol., 338 , 638–644. Villadsen, S.N.B.; Kaa, M.A.; Lars, P.; Nielsen, P.M. and Fosbøl, P.L. (2022). New electroscrubbing process for desulfurization. Sep. Purif. Technol., 278 , 119552. Zhang, G.; Yu, F. and Wang, R. (2009). Research advance in oxidative desulfurization technologies for the production of low sulfur fuel oils. Pet. Coal, 51, 196-207. Zhu, L.; Lv, X.; Tong, S.; Zhang, T.; Song, Y.; Wang, Y.; Hao, Z., Huang, C. and Xia, D. (2019). Modification of zeolite by metal and adsorption desulfurization of organic sulfide in natural gas. J. Nat. Gas Sci. Eng., 69 , 102941. | ||
آمار تعداد مشاهده مقاله: 346 تعداد دریافت فایل اصل مقاله: 572 |