Assessment of Double Shield TBM performance by using downtime index (DTI)

Abd Al-Jalil, Y. Q., 1998. Analysis of Performance of Tunnel Boring Machine-Based System. PhD
Thesis, the University of Texas.
Adesida, Patrick A., 2022. Powder factor prediction in blasting operation using rock geo-mechanical
properties and geometric parameters. International Journal of Mining and Geo-Engineering, 56(1):
25-32.
Alsahly, A., Hegemann, F., Ko¨ nig, M., Meschke, G., 2020. Integrated BIM-to-FEM approach in
mechanised tunnelling. Geomechanics and Tunnelling, 13(2): 212-220.
Azadmehr, A, Jalali, S.M., Pourrahimian, Y., 2019. An application of rock engineering system for
assessment of the rock mass fragmentation: a hybrid approach and case study. Rock Mechanics and
Rock Engineering, 52(11): 4403-4419.
Barton, N., 1999. TBM Performance Estimation in Rock Using QTBM. Tunnel & Tunneling
International, 31(90): 30-34.
Barton, N., 2000. TBM Tunneling in Jointed and Faulted Rock. Balkema. Rotterdam.
Benardos, A.G., Kaliampakos, D.C., 2004. Modelling TBM performance with artificial neural networks.
Tunnelling and Underground Space Technology, 19(6): 597-605.
Bieniawski, Z.T., Celada, B., Galera, J.M., 2007. Predicting TBM Excavability. Tunnel & Tunnelling
International, 25-28.
Bruland, A., 1998. Advance Rate and Cutter Wear, Hard Rock Tunnel Boring Machine. PhD Thesis,
Trondheim Norwegian University of Science and Technology, NTNU 3.
Ceryan, N., Ceryan, S., 2008. An application of the interaction matrices method for slope, failure
susceptibility zoning: Dogankent settlement area (Giresun, NE Turkey). Bulletin of Engineering
Geology and the Environment, 67 (3): 375-385.
Farmer, I.W., Glossop, N.H., 1980. Mechanics of disc cutter penetration. Tunnels and Tunneling, 12
(6): 22-25.
Farrokh. E., 2012. Study of Utilization Factor and Advance Rate of Hard Rock TBMs. PhD Thesis,
Department of Energy and Minerals Engineering, Pennsylvania State University.
Fattahi, H. 2018. An estimation of required rotational torque to operate horizontal directional drilling
using rock engineering systems. Journal of Petroleum Science and Technology, 8 (1): 83-97.
Freitag, S., Cao, B.T., Ninic, J., Meschke, G., 2018. Recurrent neural networks and proper orthogonal
decomposition with interval data for real-time predictions of mechanised tunnelling processes.
Computers & Structures, 207: 258-273.
Frough, O., Khetwal, A., Rostami, J., 2019. Predicting TBM utilization factor using discrete event
simulation models. Tunnelling and Underground Space Technology, 87: 91-99.
Geopersia 2023, 13(1): 1-14 13
Frough, O., Torabi, S.R., Yagiz, S., Tajik, M., 2012. Effect of Rockmass Conditions on TBM Utilization
Factor in Karaj - Tehran Water conveyance tunnel. World Tunneling Congress, Thailand.
Frough, O., Torabi, S.R., Ramezanzadeh, A., Yagiz, S., 2011. Influence of rock mass conditions on TBM
downtime in Karaj water conveyance tunnel. First Asian and 9th Iranian tunnel symposium (Persian).
Gansser, A., Huber, H., 1962. Geological Observation in the Central Elburz, Iran. Schweizerische
Mineralogische Und Petrographische Mitteilungen 42.
Gong, Q., Jiao, Y., Zhao, J., 2006. Numerical modeling of the effects of joint spacing on rock
fragmentation by TBM cutters. Tunnelling and Underground Space Technology, 21(1):46-55.
Gong, Q.M., Zhao, J., 2009. Development of a rock mass characteristics model for TBM penetration
rate prediction. International Journal of Rock Mechanics & Mining Sciences, 46 (1): 8-18.
Goodarzi, A., Hassanpour, J., Yagiz, S., Rostami, J., 2021. Predicting TBM performance in soft
sedimentary rocks, case study of Zagros mountains water tunnel projects. Tunnelling and
Underground Space Technology, 109: 103705.
Graham, P.C., 1976. Rock exploration for machine manufactures, Proceedings Symposium on
Exploration for Rock Engineering, Johannesburg.
Hashemnejad, A., Fatemi Aghda, S.M., Talkhablou, M., 2020. Mechanized tunnelling in hydrothermally
altered grounds: The effect of hydrothermal fluids on the rock behaviour in the central Iran.
Tunnelling and Underground Space Technology, ID: 216303248. 10.1016/j.tust.2020.103340
Hassanpour, J., Rostami, J., Khamhechiyan, M., Tavakoli, H.R., 2009. "TBM Performance Analysis in
Pyroclastic Rocks: Case History of Karaj Water Conveyance Tunnel. Rock Mechanics and Rock
Engineering Journal, 43:427-445.
Hudson, J.A. 1992. Rock Engineering Systems, Theory and Practice. Ellis Horwood, Chichester.
Hudson, J.A., Harrison, J.P., 1997. Engineering rock mechanics an introduction to the principles.
Pergamon.
Innaurato, N., Mancini, R., Rondena, E., Zaninetti, A., 1991. Forecasting and effective TBM
performances in a rapid excavation of a tunnel in Italy. Proceeding of 7th International Congress on
Rock Mechanics, 1009-1014.
KhaloKakaie, R., Zare naghadehi, M., 2009. The analysis and classification of rock slopes instability
potential in Khosh - Yeylagh mountainous road using systems approach (In Persian). Journal of
Iranian Association of Engineering Geology, 2 (1,2): 19-32.
KhaloKakaie, R., Zare naghadehi, M., 2012. The assessment of rock slope instability along the Khosh-
Yeylagh Main Road (Iran) using a systems approach. Environmental Earth Sciences, 67 (3): 665-682.
Mahmoodzadeh, A., Mohammadi, M., Daraei, A., Ali, H.F.H., AlSalihi, N.K., Omer, R.M.D., 2020.
Forecasting maximum surface settlement caused by urban tunneling. Automation in Construction,
120: 103375.
Moosazadeh, S., Aghababaie, H., Hoseinie, S.H., Ghodrati,B., 2018. Simulation of tunnel boring
machine utilization: A case study. Journal of Mining & Environment, 9 (1): 53-60.
Nelson, P., O’Rouke, T.D., Kulhawy, F.H., 1983. Factors affecting TBM penetration rates in
sedimentary rocks. 24th U.S. Symposium on Rock Mechanics.
Ninic, J, Bui, H.G., Meschke, G., 2020. BIM-to-IGA: A fullyautomatic design-through-analysis
workflow for segmented tunnel linings. Advanced Engineering Informatics, 46: 101137.
Ninic, J., Freitag, S., Meschke, G., 2017. A hybrid finite element and surrogate modelling approach for
simulation and monitoring supported TBM steering. Tunnelling and Underground Space
Technology, 63: 12-28.
Palmstrom, A. 1995. RMi Parameters Applied In Prediction of Tunnel Boring Penetration. In: A.
Palmtrom, RMi - A Rock Mass Characterization System for Rock Engineering Purposes (Chapter7),
PhD Thesis, Oslo University, Norway.
Ramezanzadeh, A., Rostami, J., Kastner, R., 2002. Performance Prediction Models for Hard Rock
Tunnel Boring Machines. The 6th Iranian Tunneling Conference .
Ramezanzadeh, A., 2005. Performance analysis and development of new models for performance
prediction of hard rock TBMs in rock mass. PhD Thesis, Lyon: Institute National des Sciences
Appliqu´ees.
Rostami, J, Ozdemir, L., 1993. A new model for performance prediction of hard rock TBMs. RETC
conference proceedings, Boston.
Rostami, J., Ozdemir, L., Nilson, B., 1997. Comparison between CSM and NTH Hard Rock TBM
14 Tajik & Khamehchiyan
Performance Prediction models. Colorado School of Mines, Golden, Colorado, USA.
Roxborough, F.F., Phillips, H.R., 1975. Rock excavation by disc cutter. International Journal of Rock
Mechanics and Mining Sciences, 12(12): 361-366.
Rozos, D., Pyrgiotis, L., Skias, S., Tsagaratos, P., 2008. An implementation of rock engineering system
for ranking the instability potential of natural slopes in Greek territory. An application in Karditsa
County. Landslides, 5: 261-270.
Sadeghi, M., Rasouli, V., 2011. application of rock engineering systems in evaluation of stability of
underground excavations. Amirkabir Journal of Civil Engineering, 43(1): 89- 95.
SAHEL consultant engineers institute, 2011. Engineering Geology As built Maps and Site Reports of
Conveyance Tunnel (Lot 2). SCE Archive.
SAHEL consultant engineers institute, 2009. Engineering Geology Report of Karaj-Tehran Water
Conveyance Tunnel (Lot 2). unpublished report.
Sanio, H.P., 1985. Prediction of the Performance of Disc Cutters in Anisotropic Rock. International
Journal of Rock Mechanics and Mining Sciences & Geomechanics, 22(3): 153-161.
Sapigni, M., Berti, M., Bethaz, E., Busillo, A., Cardone, G., 2002. TBM performance estimation Using
Rock mass Classification. International Journal of Rock Mechanic and Mining Sciences, 39(6):771-
788.
Sato, K., Gong, F., Itakura, K,. 1991. Prediction of Disc Cutter Performance using a Circular Rock
Cutting Ring. 1st International Mine Mechanization and Automation Symposium.
Simoes, M.G., Kim., T., 2006. Fuzzy Modeling Approaches for the Prediction of Machine Utilization
in Hard Rock Tunnel Boring Machines. Conference Record of the 2006 IEEE Industry Applications
Conference Forty-First IAS Annual Meeting, 2: 947-954.
Snowdon, A.R.D., Ryley, M., Temporal, J., 1982. Study of Disc Cutting in Selected British Rocks.
International Journal of Rock Mechanics and Mining Science & Geomechanics, ID: 140586186.
Tajik, M., Oruji, M., Novin, A., 2010. Assessment of TBM performance in tunnel excavation, first lot
of Karaj - Tehran water conveyance tunnel . Journal of Iranian Association of Engineering Geology,
3(1, 2): 41-50.
Tarkoy, P.J. 1975. Rock hardness index properties and geotechnical parameters for predicting tunnel
boring machine performance. PhD Thesis, University of Illinois at Urbana-Champaign.
Xiao, H., Yang, W., Hua, J., Zhang, Y., Jing, L., 2022. Significance and methodology: Preprocessing
the big data for machine learning on TBM performance. Underground Space, 7(4): 680-701.
Xu, C., Liu, X.L., Wang, E.Z., Wang, S.J., 2021. Prediction of tunnel boring machine operating
parameters using various machine learning algorithms. Tunnelling and Underground Space
Technology, 109: 103699.
Yaghoubi, 2010. prediction of TBM performance by rock engineering systems method. Thesis for M.Sc.
Degree, University of Kerman (Persian).
Yagiz, S. 2008. Utilizing rock mass properties for predicting TBM performance in hard rock condition.
Tunnelling and Underground Space Technology, 23(3):326-339.
Yavari, F., Mansoori, H., Ebrahimi, M.A., 2011. Determination of TBM advance rate by rock
engineering systems. First Asian and 9th Iranian tunnel symposium (Persian).
Zare Naghadehia, M., Samaei, M., Ranjbarnia, M., Nourani, V., 2018. State-of-the-art predictive
modeling of TBM performance in changing geological conditions through gene expression
programming. Measurement, 126: 46-57.
Zhang, L.Q., Yang, Z.F., Liao, Q.L., Chen, J., 2004. An application of the rock engineering system
(RES) methodology to rockfall hazard assessment on the Chengdu-Lhasa Highway, China.
International Journal of Rock Mechanics & Mining Sciences, 41(3): 526-527.