تأثیر جنس قلیف، نوع چسب و پیچ بر ظرفیت لنگر خمشی اتصال گوشه‌ای قاب ساخته‌شده با تخته ‌فیبر دانسیته متوسط (MDF) زیر بار کشش قطری

[1]. Eckelman, C.A. (2003) Textbook of product engineering and strength design of furniture. Purdue University, West Lafayette, Indiana: 65-67.

[2]. Dalvand, M., Ebrahimi, G., Haftkhani, A.R., and Maleki, S. (2013) Analysis of factors affecting diagonal tension and compression capacity of corner joints in furniture frames fabricated with dovetail key. Journal of Forestry Research, 24 (1): 155-168.

[3]. Altun, S., Burdurlu, E., and Kılıç, M. (2010) Effect of adhesive type on the bending moment capacity of miter frame corner joints. BioResources, 5 (3): 1473-1483.

[4]. Maleki, S., Dalvand, M., Rostampour, H.A., and Faezipour, M. (2013) The effect of adhesive types and dovetail fitting height on stress carrying capacity of Miter Frame corner joints constructed of particle and Medium Density Fiberboard (MDF). Journal of forest and wood products (jfwp) (iranian journal of natural resources), 66 (2): 203-214.

[5]. Özkaya, K., Burdurlu, E., Ilce, A.C., and Ciiitcioghi, H. (2010) Diagonal tensile strength of an oriented strand-board (OSB) frame with dovetail corner joint. BioResources, 5 (4): 2690-2701.

[6]. Taghiyari, H.R., Ghofrani, M., and Arbabi Ghamsari, F. (2016) Study on the tensile and compression tension-carrying capacity of corner V-nails. IRANIAN JOURNAL OF WOOD AND PAPER SCIENCE RESEARCH, 31 (4): 621-633.

[7]. Derikvand, M., and Eckelman, C.A. (2015) Bending moment capacity of L-shaped mitered frame joints constructed of MDF and particleboard. BioResources, 10 (3): 5677-5690.

[8]. Derikvand, M., and Ebrahimi, G. (2014) Strength performance of mortise and loose-tenon furniture joints under uniaxial bending moment. Journal of Forestry Research, 25 (2): 483-486.

[9]. Omrani, P., Ebrahimi, G., and Kahvand, M. (2019) Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading. Iranian Journal of Wood and Paper Industries, 10 (3): 323-336.

[10]. Omrani, P., Ebrahimi, G., and Kahvand, M. (2020) The investigation of the affecting factors on withdrawal resistance of the wooden biscuit joints. Iranian Journal of Wood and Paper Industries, 11 (1): 121-131.

[11]. Vassiliou, V., and Barboutis, I. Strength of furniture joints constructed with biscuits, pp. 1-6.

[12]. Derikvand, M., Ebrahimi, G., and Tajvidi, M. (2014) A feasibility study of using two-component polyurethane adhesive in constructing wooden structures. Journal of Forestry Research, 25 (2): 477-482.

[13]. Derikvand, M., and Pangh, H. (2016) A modified method for shear strength measurement of adhesive bonds in solid wood. BioResources, 11 (1): 354-364.

[14]. Konnerth, J., Gindl, W., Harm, M., and Müller, U. (2006) Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf-and lap joint testing method. Holz als Roh-und Werkstoff, 64 (4): 269-271.

[15]. Altinok, M., Huuml, H., and Sancak, E. (2009) Load carrying capacity of spline joints as affected by board and adhesives type. Scientific research and essays, 4 (5): 479-483.

[16]. Maleki, S., Haftkhani, A.R., Dalvand, M., Faezipour, M., and Tajvidi, M. (2012) Bending moment resistance of corner joints constructed with spline under diagonal tension and compression. Journal of Forestry Research, 23 (3): 481-490.

[17]. Tankut, A.N., and Tankut, N. (2009) Investigations the effects of fastener, glue, and composite material types on the strength of corner joints in case-type furniture construction. Materials & Design, 30 (10): 4175-4182.

[18]. BSI. (2020) BS EN 310: Wood-based panels. Determination of modulus of elasticity in bending and bending strength. Journal (Issue).

[19]. Qiao, L., and Easteal, A.J. (2001) Aspects of the performance of PVAc adhesives in wood joints. Pigment & Resin Technology, 30 (2): 79-87.

[20]. Moazami, V., Afsoni, F., Dadashi, S., and Dadashi, E. (2017) Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co). IRANIAN JOURNAL OF WOOD AND PAPER SCIENCE RESEARCH, 32 (1): 145-156.

[21]. Farajollahpour, M., Hatefnia, H., Dorieh, A., Valizadeh Kiamahalleh, M., and Afrouzi, Y.M. (2022) Research on Medium density fiberboard (MDF) behavior against screw axial withdrawal: Impact of density and operational variables. Structures, 39: 194-206.