طراحی یکپارچه سایبان‌های پوسته جنوبی ساختمان خوابگاهی در شهر تهران؛ بررسی چندجانبه سرمایش، گرمایش، روشنایی و برداشت آب‌باران

 ASHRAE. 2012 ASHRAE Handbook – Fundamentals (SI ed.). Ventilation and Infiltration. p. 16.21, 16.22 (Table 3; Chapter 16).

 Azari, R., Garshasbi, S., Amini, P., Rashed-Ali, H., Mohammadi, Y., 2016. Multi-objective optimization of building envelope design for life cycle environmental performance. Energy Build. 126, 524–534.

 Building Research Establishment, BREEAM Building Research Establishment Environmental Assessment Method. BRE Environmental & Sustainability Standard BES 5051 Issue 3.0. BREEAM Education, 2008 Assessor Manual, Building Research Establishment, Watford, 2009.

 Braganca L, Vieira SM, Andrade JB. Early stage design decisions: the way to achieve sustainable buildings at lower costs. Sci World J 2014;2014.

 Building life cycle and integrated design process (IDP), (2017, September 1). Available from:<https://www.climatetechwiki.org/technology/building-life-cycle-and-integrated-design process>

 Ikbal Cetiner, Ertan Ozkan. An approach for the evaluation of energy and cost efficiency of glass facades. Energy Build 2005; 37:673–84.

Conti, J., Holtberg, P., Diefenderfer, J., LaRose, A., Turnure, J.T., Westfall, L., 2016. International Energy Outlook 2016 With Projections to 2040. United States.

Carlucci, S., Cattarin, G., Causone, F., Pagliano, L., 2015. Multi-objective optimization of a nearly zero-energy building based on thermal and visual discomfort minimization using a non-dominated sorting genetic algorithm (NSGA-II). Energy Build. 104, 378–394.

Ding Z, Hu T, Li M, Xu X, Zou PX. Agent-based model for simulating building energy management in student residences. Energy Build 2019; 198:11–27.

Edwards, L., Torcellini, P., 2002. Literature Review of the Effects of Natural Light on Building Occupants. Golden, CO EnergyPlus. Version 9.1.0. Berkeley, (2019, March 26). Available from:< https://energyplus.net/downloads>

 EnergyPlus. Weather

Data Sources, (2019, July 31). Available from:< https://energyplus.net/weather> - Ebrahimpour, A & Marefat, M (2011), Application of advanced glazing and overhangs in residential buildings, Energy Conservation and Management, Vol. 52, pp. 212-219.

• Fang, Y and Cho, S (2019), Design optimization of building geometry and fenestration for daylighting and energy performance, Solar Energy, Vol. 191, pp. 7-18.
• - Gossard, D., Lartigue, B., Thellier, F., 2013. Multi-objective optimization of a building envelope for thermal performance using genetic algorithms and artificial neural network. Energy Build. 67, 253–260.
• - Google Sketchup Plug-in, (2011, July 16). Available from:< https://help.sketchup.com/en/downloading-older-versions>
• - I. Gaetani, P.-J. Hoes, J.L. Hensen, Occupant behavior in building energy simulation: towards a fit-for-purpose modeling strategy, Energy Build. 121(2016) 188–204.
• - Gao, H; Koch, Ch and Wu, Y (2019), Building information modelling based building energy modelling: A review, Applied Energy, Vol. 238, pp. 320-343.
• - P. Hose, J. Hensen, M. Loomans, B. de Vries, D. Bourgeois, User behavior in whole building simulation, Energy Build. 41 (2009) 295–302.
• - R.H. Henninger, M.J. Witte, D.B. Crawley, Experience testing EnergyPlus with the IEA HVAC BESTEST E100-E200 Series, in: Proceedings of Building Simulation, the Eighth International IBPSA Conference, Netherlands, 2003.
• - T. Hariri, R. Faayaz, Thermal comfort condition in Tehran, J. Environ. Stud. 27(28) (2002) 13–17.
• - Lartigue, B., Lasternas, B., Loftness, V., 2013. Multi-objective optimization of building envelope for energy consumption and daylight. Indoor Built Environ. 23, 70–80.
• - (IWBDG) Integrated whole building design guidelines, (2017, October 1). Available from:<https://www.mfe.govt.nz/sites/default/files/integrated-building-guidelines.pdf>
• - Larsson N. The integrated design process; history and analysis. International Initiative for a Sustainable Built Environment; 2009.
• - Mangkuto, R.A., Rohmah, M., Asri, A.D., 2016. Design optimization for window size, orientation, and wall reflectance with regard to various daylight metrics and lighting energy demand: A case study of buildings in the tropics. Appl. Energy 164, 211–219.
• - Milorad Boji. Application of overhangs and side fins to high-rise residential buildings in Hong Kong. Civil Eng Environ Syst 2006;23(4):271–85.
• - MPO, Health Building Design1/Design Guide for Mechanical Services of Medical Surgical Care Unites, Management and Planning Organization, Islamic Republic of Iran, 2004.
• - N. Mateus, A. Pinto, G. Grac¸ a, Validation of EnergyPlus thermal simulation of a double skin naturally and mechanically ventilated test cell, Energy Build. 75(2014) 511–522.
• - Nabil, A., Mardaljevic, J., 2005. Useful daylight illuminance: a new paradigm for assessing daylight in buildings. Light. Res. Technol. 37, 41–57.
• - B. Raji, M. Tenpierik, A. van den Dobbelsteen, An assessment of energy-savingsolutions for the envelope design of high-rise buildings in temperateclimates: a case study in the Netherlands, Energy Build. 124 (2016) 210–221.
• - Safdarian, F & Nazari, M (2015), Optimal tilt angle and orientation for solar collectors in Iran, IEEE 10th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives.
• - Suresh B. Sadineni, Srikanth Madala, Robert F. Boehm, Passive building energy savings: A review of building envelope components, Renewable and Sustainable Energy Reviews, Volume 15, Issue 8, 2011, Pages 3617-3631, ISSN 1364-0321, https://doi.org/10.1016/j.rser.2011.07.014
• - Olivia Guerra-Santin, Christopher Aidan Tweed, In-use monitoring of buildings: An overview of data collection methods, Energy and Buildings, Volume 93, 2015, Pages 189-207, ISSN 0378-7788.
• - Serginson M, Mokhtar G, Kelly G. A theoretical comparison of traditional and integrated project delivery design processes on international BIM competitions. Int J 3-D Inform Model (IJ3DIM) 2013;2(4):52–64.
• - Singh MC, Garg SN. Energy rating of different glazings for Indian climates. Energy 2009; 34:1986–92.
• - M.J. Witte, R.H. Henninger, D.B. Crawley, Experience testing EnergyPlus with the ASHRAE 1052-RP building fabric analytical tests, in: Proceedings of the Building Simulation, IBSPA-USA National Conference, Boulder, CO, 2004.
• - Yousefi, F; Gholipour Y & Yan, W (2017), A study of the impact of occupant behaviors on energy performance of building envelopes using occupants’ data, Energy & Buildings, Vol. 148, pp. 182-198.
• - D. Yan, W. O’Brien, T. Hong, X. Feng, H.B. Gunay, F. Tahmasebi, A. Mahdavi, Occupant behavior modeling for building performance simulation: current state and future challenges, Energy Build. 107 (2015) 264–278.
• - Zimmerman A, Eng P. Integrated design process guide. Ottawa: Canada Mortgage and Housing Corporation; 2006.
• - J. Zhao, K.P. Lam, B.E. Ydstie, EnergyPlus model-based predictive control (EPMPC) by using Matlab/Simulink and MLE+, in: Proceedings of Building Simulation: 13th International IBPSA Conference, France, 2013.