Effect of Surface Condition on the Skid Performance of the Stone Matrix Asphalt

AbdullahI, S. (2016). Investigation of quantitative changes in precipitation dust in Zahedan city, M.Sc. Thesis, Department of Natural Resources. Yazd University. 

ASTM E303-93, (2018). Standard test method for measuring surface frictional properties using British Pendulum tester, West Conshohocken, PA, USA.

ASTM E465, (2017). Standard test method for measuring mean profile depth using sand patch method, West Conshohocken, PA, USA.

Blake, D.M., Wilson, T.M., Cole, J.W., Deligne, N.I. and Lindsay, J.M. (2017). "Impact of volcanic ash on road and airfield surface skid resistance", Sustainability, 9(8), 1389.

Cao, P., Yan, X., Bai, X. and Yuan, C. (2010). "Effects of contaminants on skid resistance of asphalt pavements", In Traffic and Transportation Studies 2010, 1341-1351.

Chan, C.Y., Huang, B., Yan, X. and Richards, S. (2010). "Investigating effects of asphalt pavement conditions on traffic accidents in Tennessee based on the pavement management system (PMS)", Journal of Advanced Transportation, 44(3), 150-161.

Dan, H.-C., He, L.-H. and Xu, B. (2017). "Experimental investigation on skid resistance of asphalt pavement under various slippery conditions", International Journal of Pavement Engineering, 18(6), 485-499.

Do, M.-T., Cerezo, V. and Zahouani, H. (2014). "Laboratory test to evaluate the effect of contaminants on road skid resistance", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228(11), 1276-1284.

Elkin, B.L., Kercher, K.J. and Gulen, S. (1980). "Seasonal variation in skid resistance of bituminous surfaces in Indiana", Transportation Research Record, 777, 50-58.

Fakhri, M. and Taribakhsh, M. (2014). "Studying the effect of gradation and macro texture generating by the method of gravel distribution, on the skid resistance of the concrete pavements", Journal of Civil and Environmental Engineering, 43(73), 69-78.

Henry, J.J. (1983). "Comparison of the friction performance of a passenger car tire and the ASTM Standard test tires", In Frictional Interaction of Tire and Pavement, ASTM International.

Irfan, M., Ali, Y., Ahmed, S., Iqbal, S. and Wang, H. (2019). "Rutting and fatigue properties of cellulose fiber-added stone mastic asphalt concrete mixtures", Advances in Materials Science and Engineering, Hindawi, Article ID 5604197, 8 p.

Jalal-Kamali, M.-H., Hasani, A. and Sodagari, J. (2019). "Introduction and application of rotational abrasion device to determine concrete pavement abrasion", Civil Engineering Infrastructures Journal, 52(2), 295-308.

Jalalkamali, R., Dibaee, M.M., Jalal Kamali, M.H. and Hassani, A. (2021). "An investigation of the relationship among skid resistance, mean texture depth and abrasion resistance for different macrotextures of concrete pavements", Civil Engineering Infrastructures Journal, 54(2), 301-317.

Kamel, N. and Gartshore, T. (1982). "Ontario’s wet pavement accident reduction program", In Pavement Surface Characteristics and Materials, ASTM International.

Khasawneh, M.A. and Alsheyab, M.A. (2020). "Effect of nominal maximum aggregate size and aggregate gradation on the surface frictional properties of hot mix asphalt mixtures", Construction and Building Materials, 244, 118355.

Khasawneh, M.A. and Liang, R.Y. (2012). "Temperature effect on frictional properties of HMA at different polishing stages", Jordan Journal of Civil Engineering, 6(1), 39-53.

Kogbara, R.B., Masad, E.A., Kassem, E., Scarpas, A.T. and Anupam, K. (2016). "A state-of-the-art review of parameters influencing measurement and modeling of skid resistance of asphalt pavements", Construction and Building Materials, 114, 602-617.

Liu, Q., Hossain, S.M.K., Tighe, S.L. and Shalaby, A. (2019). "Field assessment of three-dimensional surface texture and frictional properties of experimental Canadian road pavements", In Pavement and Asset Management, 73-80, CRC Press.

National Cooperative Highway Research Program (NCHRP). (1999). Designing stone matrix asphalt mixtures for rut-resistant pavements, Report 425, Project D9-8 FY’94, Auburn, AL,  United States, 88 p.

Raufi, H., Topal, A., Sengoz, B. and Kaya, D. (2020). "Assessment of asphalt binders and Hot Mix asphalt modified with nanomaterials", Periodica Polytechnica Civil Engineering, 64(1), 1-13.

Sharafati, A. and Mishmast Nahi, A. (2017). "Analysis of the effect of 120-day storms on the increase of road accidents, Case study: Roads to Zabol city", Rahvar Scientific Promotional Quarterly, 14(38), 137-148.

Terrones-Saeta, J.M., Suárez-Macías, J., Iglesias-Godino, F.J. and Corpas-Iglesias, F.A. (2020). "Evaluation of the use of electric arc furnace slag and ladle furnace slag in stone mastic asphalt mixes with discarded cellulose fibers from the papermaking industry", Metals, 10(11), 1548.

Tyfour, W.R. (2009). "Tire skid resistance on contaminated wet pavements", JJMIE, 3(2).

van Bijsterveld, W. and del Val, M.A. (2016). "Towards quantification of seasonal variations in skid resistance measurements", Road Materials and Pavement Design, 17(2), 477-486.

Wallman, C.-G. and Åström, H. (2001). "Friction measurement methods and the correlation between road friction and traffic safety: A literature review", Swedish National Road and Transport Research Institute (VTI) Report, 47 p.

Wang, D., Xie, X., Oeser, M. and Steinauer, B. (2015). "Influence of the gritting material applied during the winter services on the asphalt surface performance", Cold Regions Science and Technology, 112, 39-44.

Xiao, J., Kulakowski, B.T. and EI-Gindy, M. (2000). "Prediction of risk of wet-pavement accidents: Fuzzy logic model", Transportation Research Record, 1717(1), 28-36.

Zealand, T.N. (2002). "Specification for skid resistance investigation and treatment selection", NZTA T10 Specification, NZ Transport Agency, New Zealand, 21 p.

Zhang, L., Ong, G.P. and Fwa, T.F. (2015). "Numerical study on the influence of aggregate size on skid resistance performance of porous pavements", Asian Transport Studies, 3(3), 284-297.