پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شمارهها | 6,240 |
| تعداد مقالات | 67,871 |
| تعداد مشاهده مقاله | 115,464,743 |
| تعداد دریافت فایل اصل مقاله | 90,234,691 |
Exact analytic solution for static bending of 3-D plate under transverse loading | ||
| Journal of Computational Applied Mechanics | ||
| مقاله 1، دوره 53، شماره 3، آذر 2022، صفحه 309-331 اصل مقاله (736.75 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jcamech.2022.342953.721 | ||
| نویسندگان | ||
| Festus Chukwudi Onyeka* 1؛ Thompson Edozie Okeke2؛ Chidobere D Nwa-David3؛ Benjamin O Mama2 | ||
| 1Department of Civil Engineering, Edo State University Uzairue, Edo State, 312102, Nigeria | ||
| 2Department of Civil Engineering, University of Nigeria, Nsukka, Enugu State, 410101, Nigeria. | ||
| 3Department of Civil Engineering, Michael Okpara University of Agriculture, Umudike, Abia State, 440109, Nigeria | ||
| چکیده | ||
| In this study, an exact solution for the bending analysis of a three-dimensional (3-D) rectangular plate under transverse loading is presented using fundamentals of elasticity theory. The theoretical model whose formulation is based on static elastic principle considered transverse shear deformation and still obviate the need for shear correction factor effect which is associated to refined plate theory (RPT). As an improvement to RPT, the equations of equilibrium are obtained from elastic principle using 3-D kinematic and constitutive relations which is later converted to energy equation using general variation to get the deflection and rotation relationship. The solution of the equilibrium equation produced an exact trigonometric displacement function which is a product of the coefficient of deflection and shape function of the plate. By minimizing the general energy equation with respect to the coefficients of deflection and shear deformation rotation, a theoretical model for calculating the deflection, moment and stresses of thick rectangular plate are obtained. The comparative analysis between the present results and other theories shows that this 3-D predicts the vertical displacement, moments and the stresses more accurately than previous studies considered in this paper. It was observed that the present theory varied more with those of those of 2-D numeric analysis and 2-D HSDT with about 7.83% and 6.01%. Meanwhile, the recorded percentage differences showed that a derived 2-D HSDT predicted accurately the bending characteristics of the plate with 2.55%, proving that assumed deflection is coarser for the thick plate analysis. It is concluded that unlike an assumed function, a derived 2-D theory can give a close form solution, but a typical 3-D theory of elasticity is required for an exact solution of rectangular plate and can be recommended for the analysis of any type of rectangular plate with such loading and boundary condition. | ||
| کلیدواژهها | ||
| Exact static theory؛ equilibrium equation؛ bending of 3-D clamped plate؛ trigonometric model | ||
| مراجع | ||
|
[1] F. Onyeka, B. O. Mama, C. Nwa-David, Application of variation method in three dimensional stability analysis of rectangular plate using various exact shape functions, Nigerian Journal of Technology, Vol. 41, No. 1, pp. 8–20-8–20, 2022.
[2] F. Onyeka, T. Okeke, C. Nwa-David, Static and Buckling Analysis of a Three-Dimensional (3-D) Rectangular Thick Plates Using Exact Polynomial Displacement Function, European Journal of Engineering and Technology Research, Vol. 7, No. 2, pp. 29-35, 2022.
[3] C. Nwoji, B. Mama, H. Onah, C. Ike, Kantorovich-vlasov method for simply supported rectangular plates under uniformly distributed transverse loads, methods, Vol. 14, No. 15, pp. 16, 2017.
[4] F. Onyeka, F. Okafor, Buckling solution of a three-dimensional clamped rectangular thick plate using direct variational method, building structure, Vol. 1, pp. 3, 2021.
[5] K. Chandrashekhara, 2001, Theory of plates, Universities press,
[6] F. C. Onyeka, C. D. Nwa-David, T. E. Okeke, Study on Stability Analysis of Rectangular Plates Section Using a Three-Dimensional Plate Theory with Polynomial Function.
[7] F. Onyeka, T. Okeke, Elastic bending analysis exact solution of plate using alternative i refined plate theory, Nigerian Journal of Technology, Vol. 40, No. 6, pp. 1018–1029-1018–1029, 2021.
[8] F. Onyeka, Critical lateral load analysis of rectangular plate considering shear deformation effect, Global Journal of Civil Engineering, Vol. 1, pp. 16-27, 2020.
[9] J. N. Reddy, 2006, Theory and analysis of elastic plates and shells, CRC press,
[10] P. Gujar, K. Ladhane, Bending analysis of simply supported and clamped circular plate, International Journal of Civil Engineering, Vol. 2, No. 5, pp. 69-75, 2015.
[11] F. Onyeka, Effect of stress and load distribution analysis on an isotropic rectangular plate, Arid Zone Journal of Engineering, Technology and Environment, Vol. 17, No. 1, pp. 9-26, 2021.
[12] F. Onyeka, F. Okafor, H. Onah, Application of a new trigonometric theory in the buckling analysis of three-dimensional thick plate, International Journal of Emerging Technologies, Vol. 12, No. 1, pp. 228-240, 2021.
[13] Y. M. Ghugal, P. D. Gajbhiye, Bending analysis of thick isotropic plates by using 5th order shear deformation theory, Journal of Applied and Computational Mechanics, Vol. 2, No. 2, pp. 80-95, 2016.
[14] F. Onyeka, D. Osegbowa, Stress analysis of thick rectangular plate using higher order polynomial shear deformation theory, FUTO Journal Series–FUTOJNLS, Vol. 6, No. 2, pp. 142-161, 2020.
[15] F. Onyeka, T. Okeke, New refined shear deformation theory effect on non-linear analysis of a thick plate using energy method, Arid Zone Journal of Engineering, Technology and Environment, Vol. 17, No. 2, pp. 121-140, 2021.
[16] R. Mindlin, Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates, 1951.
[17] E. Reissner, The effect of transverse shear deformation on the bending of elastic plates, 1945.
[18] F. C. Onyeka, T. E. Okeke, Analysis of critical imposed load of plate using variational calculus, Journal of Advances in Science and Engineering, Vol. 4, No. 1, pp. 13-23, 2021.
[19] J. C. Ezeh, O. M. Ibearugbulem, L. O. Ettu, L. S. Gwarah, I. C. Onyechere, Application of shear deformation theory for analysis of CCCS and SSFS rectangular isotropic thick plates, Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 15, No. 5, pp. 33-42, 2018.
[20] R. Szilard, Theories and applications of plate analysis: classical, numerical and engineering methods, Appl. Mech. Rev., Vol. 57, No. 6, pp. B32-B33, 2004.
[21] B. Mama, C. Nwoji, C. Ike, H. Onah, Analysis of simply supported rectangular Kirchhoff plates by the finite Fourier sine transform method, International Journal of Advanced Engineering Research and Science, Vol. 4, No. 3, pp. 237109, 2017.
[22] F. Onyeka, B. Mama, C. Nwa-David, Analytical modelling of a three-dimensional (3D) rectangular plate using the exact solution approach, IOSR Journal of Mechanical and Civil Engineering, Vol. 11, No. 1, pp. 10-22, 2022.
[23] S. Timoshenko, S. Woinowsky-Krieger, 1959, Theory of plates and shells, McGraw-hill New York,
[24] F. Onyeka, B. Mama, T. Okeke, Exact three-dimensional stability analysis of plate using a direct variational energy method, Civil Engineering Journal, Vol. 8, No. 1, pp. 60-80, 2022.
[25] N. Osadebe, C. Ike, H. Onah, C. Nwoji, F. Okafor, Application of the Galerkin-Vlasov method to the Flexural Analysis of simply supported Rectangular Kirchhoff Plates under uniform loads, Nigerian Journal of Technology, Vol. 35, No. 4, pp. 732-738, 2016.
[26] C. Nwoji, B. Mama, C. Ike, H. Onah, Galerkin-Vlasov method for the flexural analysis of rectangular Kirchhoff plates with clamped and simply supported edges, IOSR Journal of Mechanical and Civil Engineering, Vol. 14, No. 2, pp. 61-74, 2017.
[27] C. Ike, Equilibrium approach in the derivation of differential equations for homogeneous isotropic Mindlin plates, Nigerian Journal of Technology, Vol. 36, No. 2, pp. 346-350, 2017.
[28] F. Williams, Structural Stability of Columns and Plates NGR Iyengar Ellis Horwood Limited, Chichester. 1988. 316 pp. Illustrated.£ 22.50, The Aeronautical Journal, Vol. 93, No. 923, pp. 111-111, 1989.
[29] C. C. Ike, Fourier series method for finding displacements and stress fields in hyperbolic shear deformable thick beams subjected to distributed transverse loads, Journal of Computational Applied Mechanics, Vol. 53, No. 1, pp. 116-131, 2022.
[30] O. M. Ibearugbulem, J. C. Ezeh, L. O. Ettu, L. S. Gwarah, Bending analysis of rectangular thick plate using polynomial shear deformation theory, IOSR Journal of Engineering (IOSRJEN), Vol. 8, No. 9, pp. 53-61, 2018.
[31] F. Onyeka, C. Nwa-David, E. Arinze, Structural imposed load analysis of isotropic rectangular plate carrying a uniformly distributed load using refined shear plate theory, FUOYE Journal of Engineering and Technology, Vol. 6, No. 4, pp. 414-419, 2021.
[32] A. S. Sayyad, Y. M. Ghugal, Bending and free vibration analysis of thick isotropic plates by using exponential shear deformation theory, Applied and Computational mechanics, Vol. 6, No. 1, 2012.
[33] F. Onyeka, E. T. Okeke, Analytical solution of thick rectangular plate with clamped and free support boundary condition using polynomial shear deformation theory, Advances in Science, Technology and Engineering Systems Journal, Vol. 6, No. 1, pp. 1427-1439, 2021.
[34] J. Mantari, A. Oktem, C. G. Soares, A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates, International Journal of Solids and Structures, Vol. 49, No. 1, pp. 43-53, 2012.
[35] F. Onyeka, F. Okafor, H. Onah, Application of exact solution approach in the analysis of thick rectangular plate, International Journal of Applied Engineering Research, Vol. 14, No. 8, pp. 2043-2057, 2019.
[36] A. Y. Grigorenko, A. Bergulev, S. Yaremchenko, Numerical solution of bending problems for rectangular plates, International Applied Mechanics, Vol. 49, No. 1, pp. 81-94, 2013.
[37] O. M. Ibearugbulem, U. C. Onwuegbuchulem, C. Ibearugbulem, Analytical Three-Dimensional Bending Analyses of Simply Supported Thick Rectangular Plate, International Journal of Engineering Advanced Research, Vol. 3, No. 1, pp. 27-45, 2021.
[38] F. Onyeka, B. Mama, Analytical study of bending characteristics of an elastic rectangular plate using direct variational energy approach with trigonometric function, Emerging Science Journal, Vol. 5, No. 6, pp. 916-926, 2021.
[39] A. Hadi, A. Rastgoo, A. Daneshmehr, F. Ehsani, Stress and strain analysis of functionally graded rectangular plate with exponentially varying properties, Indian Journal of Materials Science, Vol. 2013, 2013.
[40] M. Mousavi Khoram, M. Hosseini, M. Shishesaz, A concise review of nano-plates, Journal of Computational Applied Mechanics, Vol. 50, No. 2, pp. 420-429, 2019.
[41] R. Noroozi, A. Barati, A. Kazemi, S. Norouzi, A. Hadi, Torsional vibration analysis of bi-directional FG nano-cone with arbitrary cross-section based on nonlocal strain gradient elasticity, Advances in nano research, Vol. 8, No. 1, pp. 13-24, 2020.
[42] M. Mohammadi, A. Farajpour, A. Moradi, M. Hosseini, Vibration analysis of the rotating multilayer piezoelectric Timoshenko nanobeam, Engineering Analysis with Boundary Elements, Vol. 145, pp. 117-131, 2022/12/01/, 2022.
[43] M. Z. Nejad, A. Rastgoo, A. Hadi, Exact elasto-plastic analysis of rotating disks made of functionally graded materials, International Journal of Engineering Science, Vol. 85, pp. 47-57, 2014.
[44] M. Z. Nejad, A. Hadi, A. Rastgoo, Buckling analysis of arbitrary two-directional functionally graded Euler–Bernoulli nano-beams based on nonlocal elasticity theory, International Journal of Engineering Science, Vol. 103, pp. 1-10, 2016.
[45] M. Z. Nejad, A. Hadi, A. Farajpour, Consistent couple-stress theory for free vibration analysis of Euler-Bernoulli nano-beams made of arbitrary bi-directional functionally graded materials, Structural engineering and mechanics: An international journal, Vol. 63, No. 2, pp. 161-169, 2017.
[46] M. Z. Nejad, N. Alamzadeh, A. Hadi, Thermoelastoplastic analysis of FGM rotating thick cylindrical pressure vessels in linear elastic-fully plastic condition, Composites Part B: Engineering, Vol. 154, pp. 410-422, 2018.
[47] M. Z. Nejad, A. Hadi, A. Omidvari, A. Rastgoo, Bending analysis of bi-directional functionally graded Euler-Bernoulli nano-beams using integral form of Eringen's non-local elasticity theory, Structural engineering and mechanics: An international journal, Vol. 67, No. 4, pp. 417-425, 2018.
[48] M. Hosseini, M. Shishesaz, K. N. Tahan, A. Hadi, Stress analysis of rotating nano-disks of variable thickness made of functionally graded materials, International Journal of Engineering Science, Vol. 109, pp. 29-53, 2016.
[49] M. Hosseini, M. Shishesaz, A. Hadi, Thermoelastic analysis of rotating functionally graded micro/nanodisks of variable thickness, Thin-Walled Structures, Vol. 134, pp. 508-523, 2019.
[50] M. Mohammadi, M. Ghayour, A. Farajpour, Analysis of Free Vibration Sector Plate Based on Elastic Medium by using New Version of Differential Quadrature Method, Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, Vol. 3, No. 2, pp. 47-56, 2010.
[51] N. GHAYOUR, A. SEDAGHAT, M. MOHAMMADI, WAVE PROPAGATION APPROACH TO FLUID FILLED SUBMERGED VISCO-ELASTIC FINITE CYLINDRICAL SHELLS, JOURNAL OF AEROSPACE SCIENCE AND TECHNOLOGY (JAST), Vol. 8, No. 1, pp. -, 2011.
[52] H. Moosavi, M. Mohammadi, A. Farajpour, S. H. Shahidi, Vibration analysis of nanorings using nonlocal continuum mechanics and shear deformable ring theory, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 1, pp. 135-140, 2011/10/01/, 2011.
[53] A. Farajpour, M. Danesh, M. Mohammadi, Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 3, pp. 719-727, 2011.
[54] A. Farajpour, M. Mohammadi, A. Shahidi, M. Mahzoon, Axisymmetric buckling of the circular graphene sheets with the nonlocal continuum plate model, Physica E: Low-dimensional Systems and Nanostructures, Vol. 43, No. 10, pp. 1820-1825, 2011.
[55] M. Danesh, A. Farajpour, M. Mohammadi, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications, Vol. 39, No. 1, pp. 23-27, 2012.
[56] A. Farajpour, A. Shahidi, M. Mohammadi, M. Mahzoon, Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics, Composite Structures, Vol. 94, No. 5, pp. 1605-1615, 2012.
[57] M. Mohammadi, M. Goodarzi, M. Ghayour, S. Alivand, Small scale effect on the vibration of orthotropic plates embedded in an elastic medium and under biaxial in-plane pre-load via nonlocal elasticity theory, 2012.
[58] M. Mohammadi, A. Farajpour, M. Goodarzi, H. Mohammadi, Temperature Effect on Vibration Analysis of Annular Graphene Sheet Embedded on Visco-Pasternak Foundati, Journal of Solid Mechanics, Vol. 5, No. 3, pp. 305-323, 2013.
[59] M. Mohammadi, A. Farajpour, M. Goodarzi, R. Heydarshenas, Levy Type Solution for Nonlocal Thermo-Mechanical Vibration of Orthotropic Mono-Layer Graphene Sheet Embedded in an Elastic Medium, Journal of Solid Mechanics, Vol. 5, No. 2, pp. 116-132, 2013.
[60] M. Mohammadi, M. Goodarzi, M. Ghayour, A. Farajpour, Influence of in-plane pre-load on the vibration frequency of circular graphene sheet via nonlocal continuum theory, Composites Part B: Engineering, Vol. 51, pp. 121-129, 2013.
[61] M. Mohammadi, M. Ghayour, A. Farajpour, Free transverse vibration analysis of circular and annular graphene sheets with various boundary conditions using the nonlocal continuum plate model, Composites Part B: Engineering, Vol. 45, No. 1, pp. 32-42, 2013.
[62] M. Mohammadi, A. Farajpour, M. Goodarzi, H. Shehni nezhad pour, Numerical study of the effect of shear in-plane load on the vibration analysis of graphene sheet embedded in an elastic medium, Computational Materials Science, Vol. 82, pp. 510-520, 2014/02/01/, 2014.
[63] A. Farajpour, A. Rastgoo, M. Mohammadi, Surface effects on the mechanical characteristics of microtubule networks in living cells, Mechanics Research Communications, Vol. 57, pp. 18-26, 2014/04/01/, 2014.
[64] S. Asemi, A. Farajpour, H. Asemi, M. Mohammadi, Influence of initial stress on the vibration of double-piezoelectric-nanoplate systems with various boundary conditions using DQM, Physica E: Low-dimensional Systems and Nanostructures, Vol. 63, pp. 169-179, 2014.
[65] S. Asemi, A. Farajpour, M. Mohammadi, Nonlinear vibration analysis of piezoelectric nanoelectromechanical resonators based on nonlocal elasticity theory, Composite Structures, Vol. 116, pp. 703-712, 2014.
[66] M. Mohammadi, A. Farajpour, A. Moradi, M. Ghayour, Shear buckling of orthotropic rectangular graphene sheet embedded in an elastic medium in thermal environment, Composites Part B: Engineering, Vol. 56, pp. 629-637, 2014.
[67] S. R. Asemi, M. Mohammadi, A. Farajpour, A study on the nonlinear stability of orthotropic single-layered graphene sheet based on nonlocal elasticity theory, Latin American Journal of Solids and Structures, Vol. 11, No. 9, pp. 1515-1540, 2014.
[68] M. Mohammadi, A. Farajpour, M. Goodarzi, F. Dinari, Thermo-mechanical vibration analysis of annular and circular graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, pp. 659-682, 2014.
[69] M. Mohammadi, A. Moradi, M. Ghayour, A. Farajpour, Exact solution for thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, No. 3, pp. 437-458, 2014.
[70] M. Safarabadi, M. Mohammadi, A. Farajpour, M. Goodarzi, Effect of surface energy on the vibration analysis of rotating nanobeam, 2015.
[71] H. Asemi, S. Asemi, A. Farajpour, M. Mohammadi, Nanoscale mass detection based on vibrating piezoelectric ultrathin films under thermo-electro-mechanical loads, Physica E: Low-dimensional Systems and Nanostructures, Vol. 68, pp. 112-122, 2015.
[72] M. Goodarzi, M. Mohammadi, M. Khooran, F. Saadi, Thermo-Mechanical Vibration Analysis of FG Circular and Annular Nanoplate Based on the Visco-Pasternak Foundation, Journal of Solid Mechanics, Vol. 8, No. 4, pp. 788-805, 2016.
[73] M. Baghani, M. Mohammadi, A. Farajpour, Dynamic and Stability Analysis of the Rotating Nanobeam in a Nonuniform Magnetic Field Considering the Surface Energy, International Journal of Applied Mechanics, Vol. 08, No. 04, pp. 1650048, 2016.
[74] M. R. Farajpour, A. Rastgoo, A. Farajpour, M. Mohammadi, Vibration of piezoelectric nanofilm-based electromechanical sensors via higher-order non-local strain gradient theory, Micro & Nano Letters, Vol. 11, No. 6, pp. 302-307, 2016.
[75] A. Farajpour, M. Yazdi, A. Rastgoo, M. Mohammadi, A higher-order nonlocal strain gradient plate model for buckling of orthotropic nanoplates in thermal environment, Acta Mechanica, Vol. 227, No. 7, pp. 1849-1867, 2016.
[76] A. Farajpour, M. H. Yazdi, A. Rastgoo, M. Loghmani, M. Mohammadi, Nonlocal nonlinear plate model for large amplitude vibration of magneto-electro-elastic nanoplates, Composite Structures, Vol. 140, pp. 323-336, 2016.
[77] M. Mohammadi, M. Safarabadi, A. Rastgoo, A. Farajpour, Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment, Acta Mechanica, Vol. 227, No. 8, pp. 2207-2232, 2016.
[78] A. Farajpour, A. Rastgoo, M. Mohammadi, Vibration, buckling and smart control of microtubules using piezoelectric nanoshells under electric voltage in thermal environment, Physica B: Condensed Matter, Vol. 509, pp. 100-114, 2017.
[79] M. Mohammadi, M. Hosseini, M. Shishesaz, A. Hadi, A. Rastgoo, Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads, European Journal of Mechanics - A/Solids, Vol. 77, pp. 103793, 2019/09/01/, 2019.
[80] M. Mohammadi, A. Rastgoo, Nonlinear vibration analysis of the viscoelastic composite nanoplate with three directionally imperfect porous FG core, Structural Engineering and Mechanics, An Int'l Journal, Vol. 69, No. 2, pp. 131-143, 2019.
[81] M. Mohammadi, A. Rastgoo, Primary and secondary resonance analysis of FG/lipid nanoplate with considering porosity distribution based on a nonlinear elastic medium, Mechanics of Advanced Materials and Structures, Vol. 27, No. 20, pp. 1709-1730, 2020/10/15, 2020.
[82] M. Goodarzi, M. Mohammadi, A. Farajpour, M. Khooran, Investigation of the effect of pre-stressed on vibration frequency of rectangular nanoplate based on a visco-Pasternak foundation, 2014.
[83] A. Hadi, M. Z. Nejad, M. Hosseini, Vibrations of three-dimensionally graded nanobeams, International Journal of Engineering Science, Vol. 128, pp. 12-23, 2018.
[84] M. Shishesaz, M. Hosseini, Mechanical behavior of functionally graded nano-cylinders under radial pressure based on strain gradient theory, Journal of Mechanics, Vol. 35, No. 4, pp. 441-454, 2019.
[85] M. Shishesaz, M. Hosseini, K. Naderan Tahan, A. Hadi, Analysis of functionally graded nanodisks under thermoelastic loading based on the strain gradient theory, Acta Mechanica, Vol. 228, No. 12, pp. 4141-4168, 2017.
[86] Z. Mazarei, M. Z. Nejad, A. Hadi, Thermo-elasto-plastic analysis of thick-walled spherical pressure vessels made of functionally graded materials, International Journal of Applied Mechanics, Vol. 8, No. 04, pp. 1650054, 2016.
[87] A. Hadi, M. Z. Nejad, A. Rastgoo, M. Hosseini, Buckling analysis of FGM Euler-Bernoulli nano-beams with 3D-varying properties based on consistent couple-stress theory, Steel and Composite Structures, An International Journal, Vol. 26, No. 6, pp. 663-672, 2018.
[88] H. Haghshenas Gorgani, M. Mahdavi Adeli, M. Hosseini, Pull-in behavior of functionally graded micro/nano-beams for MEMS and NEMS switches, Microsystem Technologies, Vol. 25, No. 8, pp. 3165-3173, 2019.
[89] A. Barati, M. M. Adeli, A. Hadi, Static torsion of bi-directional functionally graded microtube based on the couple stress theory under magnetic field, International Journal of Applied Mechanics, Vol. 12, No. 02, pp. 2050021, 2020.
[90] C. Wang, J. N. Reddy, K. Lee, 2000, Shear deformable beams and plates: Relationships with classical solutions, Elsevier,
[91] J. Reddy, A refined nonlinear theory of plates with transverse shear deformation, International Journal of solids and structures, Vol. 20, No. 9-10, pp. 881-896, 1984.
[92] J. Xiao, R. Batra, D. Gilhooley, J. Gillespie Jr, M. McCarthy, Analysis of thick plates by using a higher-order shear and normal deformable plate theory and MLPG method with radial basis functions, Computer Methods in Applied Mechanics and Engineering, Vol. 196, No. 4-6, pp. 979-987, 2007.
[93] T. Kant, E. Hinton, Numerical analysis of rectangular Mindlin plates by the segmentation method, Civil Engineering Department, Report: C, Vol. 365, 1980.
[94] K. Lee, G. Lim, C. Wang, Thick Lévy plates re-visited, International Journal of Solids and Structures, Vol. 39, No. 1, pp. 127-144, 2002. | ||
|
آمار تعداد مشاهده مقاله: 474 تعداد دریافت فایل اصل مقاله: 425 |
||