Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell

[1]          A. Çalık, S. Yıldırım, E. Tosun, Estimation of crack propagation in polymer electrolyte membrane fuel cell under vibration conditions, International Journal of Hydrogen Energy, Vol. 42, No. 36, pp. 23347-23351, 2017/09/07/, 2017.

[2]          H. Serin, Ş. Yıldızhan, Hydrogen addition to tea seed oil biodiesel: Performance and emission characteristics, International Journal of Hydrogen Energy, Vol. 43, No. 38, pp. 18020-18027, 2018/09/20/, 2018.

[3]          G. Tüccar, E. Uludamar, Emission and engine performance analysis of a diesel engine using hydrogen enriched pomegranate seed oil biodiesel, International Journal of Hydrogen Energy, Vol. 43, No. 38, pp. 18014-18019, 2018/09/20/, 2018.

[4]          Y. Wang, D. F. Ruiz Diaz, K. S. Chen, Z. Wang, X. C. Adroher, Materials, technological status, and fundamentals of PEM fuel cells – A review, Materials Today, Vol. 32, pp. 178-203, 2020/01/01/, 2020.

[5]          H. Asemi, S. Asemi, A. Farajpour, M. Mohammadi, Nanoscale mass detection based on vibrating piezoelectric ultrathin films under thermo-electro-mechanical loads, Physica E: Low-dimensional Systems and Nanostructures, Vol. 68, pp. 112-122, 2015.

[6]          S. Asemi, A. Farajpour, H. Asemi, M. Mohammadi, Influence of initial stress on the vibration of double-piezoelectric-nanoplate systems with various boundary conditions using DQM, Physica E: Low-dimensional Systems and Nanostructures, Vol. 63, pp. 169-179, 2014.

[7]          S. Asemi, A. Farajpour, M. Mohammadi, Nonlinear vibration analysis of piezoelectric nanoelectromechanical resonators based on nonlocal elasticity theory, Composite Structures, Vol. 116, pp. 703-712, 2014.

[8]          S. R. Asemi, M. Mohammadi, A. Farajpour, A study on the nonlinear stability of orthotropic single-layered graphene sheet based on nonlocal elasticity theory, Latin American Journal of Solids and Structures, Vol. 11, No. 9, pp. 1515-1540, 2014.

[9]          M. Baghani, M. Mohammadi, A. Farajpour, Dynamic and Stability Analysis of the Rotating Nanobeam in a Nonuniform Magnetic Field Considering the Surface Energy, International Journal of Applied Mechanics, Vol. 08, No. 04, pp. 1650048, 2016.

[10]        M. Danesh, A. Farajpour, M. Mohammadi, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications, Vol. 39, No. 1, pp. 23-27, 2012.

[11]        A. Farajpour, M. Danesh, M. Mohammadi, Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 3, pp. 719-727, 2011.

[12]        A. Farajpour, M. Mohammadi, A. Shahidi, M. Mahzoon, Axisymmetric buckling of the circular graphene sheets with the nonlocal continuum plate model, Physica E: Low-dimensional Systems and Nanostructures, Vol. 43, No. 10, pp. 1820-1825, 2011.

[13]        A. Farajpour, A. Rastgoo, M. Mohammadi, Surface effects on the mechanical characteristics of microtubule networks in living cells, Mechanics Research Communications, Vol. 57, pp. 18-26, 2014.

[14]        A. Farajpour, A. Rastgoo, M. Mohammadi, Vibration, buckling and smart control of microtubules using piezoelectric nanoshells under electric voltage in thermal environment, Physica B: Condensed Matter, Vol. 509, pp. 100-114, 2017.

[15]        A. Farajpour, A. Shahidi, M. Mohammadi, M. Mahzoon, Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics, Composite Structures, Vol. 94, No. 5, pp. 1605-1615, 2012.

[16]        A. Farajpour, M. Yazdi, A. Rastgoo, M. Mohammadi, A higher-order nonlocal strain gradient plate model for buckling of orthotropic nanoplates in thermal environment, Acta Mechanica, Vol. 227, No. 7, pp. 1849-1867, 2016.

[17]        A. Farajpour, M. H. Yazdi, A. Rastgoo, M. Loghmani, M. Mohammadi, Nonlocal nonlinear plate model for large amplitude vibration of magneto-electro-elastic nanoplates, Composite Structures, Vol. 140, pp. 323-336, 2016.

[18]        M. R. Farajpour, A. Rastgoo, A. Farajpour, M. Mohammadi, Vibration of piezoelectric nanofilm-based electromechanical sensors via higher-order non-local strain gradient theory, Micro & Nano Letters, Vol. 11, No. 6, pp. 302-307, 2016.

[19]        N. GHAYOUR, A. SEDAGHAT, M. MOHAMMADI, WAVE PROPAGATION APPROACH TO FLUID FILLED SUBMERGED VISCO-ELASTIC FINITE CYLINDRICAL SHELLS, JOURNAL OF AEROSPACE SCIENCE AND TECHNOLOGY (JAST), Vol. 8, No. 1, pp. -, 2011.

[20]        M. GOODARZI, M. MOHAMMADI, A. FARAJPOUR, M. KHOORAN, INVESTIGATION OF THE EFFECT OF PRE-STRESSED ON VIBRATION FREQUENCY OF RECTANGULAR NANOPLATE BASED ON A VISCO-PASTERNAK FOUNDATION, JOURNAL OF SOLID MECHANICS, Vol. 6, No. 1, pp. -, 2014.

[21]        M. Goodarzi, M. Mohammadi, M. Khooran, F. Saadi, Thermo-Mechanical Vibration Analysis of FG Circular and Annular Nanoplate Based on the Visco-Pasternak Foundation, Journal of Solid Mechanics, Vol. 8, No. 4, pp. 788-805, 2016.

[22]        M. Mohammadi, A. Farajpour, M. Goodarzi, F. Dinari, Thermo-mechanical vibration analysis of annular and circular graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, pp. 659-682, 2014.

[23]        M. Mohammadi, A. Farajpour, M. Goodarzi, R. Heydarshenas, Levy type solution for nonlocal thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Journal of Solid Mechanics, Vol. 5, No. 2, pp. 116-132, 2013.

[24]        M. Mohammadi, A. Farajpour, M. Goodarzi, H. Mohammadi, Temperature Effect on Vibration Analysis of Annular Graphene Sheet Embedded on Visco-Pasternak Foundati, Journal of Solid Mechanics, Vol. 5, No. 3, pp. 305-323, 2013.

[25]        M. Mohammadi, A. Farajpour, M. Goodarzi, H. Shehni nezhad pour, Numerical study of the effect of shear in-plane load on the vibration analysis of graphene sheet embedded in an elastic medium, Computational Materials Science, Vol. 82, pp. 510-520, 2014/02/01/, 2014.

[26]        M. Mohammadi, A. Farajpour, A. Moradi, M. Ghayour, Shear buckling of orthotropic rectangular graphene sheet embedded in an elastic medium in thermal environment, Composites Part B: Engineering, Vol. 56, pp. 629-637, 2014.

[27]        M. Mohammadi, M. Ghayour, A. Farajpour, Analysis of Free Vibration Sector Plate Based on Elastic Medium by using New Version of Differential Quadrature Method, Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, Vol. 3, No. 2, pp. 47-56, 2010.

[28]        M. Mohammadi, M. Ghayour, A. Farajpour, Free transverse vibration analysis of circular and annular graphene sheets with various boundary conditions using the nonlocal continuum plate model, Composites Part B: Engineering, Vol. 45, No. 1, pp. 32-42, 2013.

[29]        M. MOHAMMADI, M. GOODARZI, M. GHAYOUR, S. ALIVAND, SMALL SCALE EFFECT ON THE VIBRATION OF ORTHOTROPIC PLATES EMBEDDED IN AN ELASTIC MEDIUM AND UNDER BIAXIAL IN-PLANE PRE-LOAD VIA NONLOCAL ELASTICITY THEORY, JOURNAL OF SOLID MECHANICS, Vol. 4, No. 2, pp. -, 2012.

[30]        M. Mohammadi, M. Goodarzi, M. Ghayour, A. Farajpour, Influence of in-plane pre-load on the vibration frequency of circular graphene sheet via nonlocal continuum theory, Composites Part B: Engineering, Vol. 51, pp. 121-129, 2013.

[31]        M. Mohammadi, M. Hosseini, M. Shishesaz, A. Hadi, A. Rastgoo, Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads, European Journal of Mechanics - A/Solids, Vol. 77, pp. 103793, 2019/09/01/, 2019.

[32]        M. Mohammadi, A. Moradi, M. Ghayour, A. Farajpour, Exact solution for thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, No. 3, pp. 437-458, 2014.

[33]        M. Mohammadi, A. Rastgoo, Nonlinear vibration analysis of the viscoelastic composite nanoplate with three directionally imperfect porous FG core, Structural Engineering and Mechanics, An Int'l Journal, Vol. 69, No. 2, pp. 131-143, 2019.

[34]        M. Mohammadi, A. Rastgoo, Primary and secondary resonance analysis of FG/lipid nanoplate with considering porosity distribution based on a nonlinear elastic medium, Mechanics of Advanced Materials and Structures, Vol. 27, No. 20, pp. 1709-1730, 2020.

[35]        M. Mohammadi, M. Safarabadi, A. Rastgoo, A. Farajpour, Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment, Acta Mechanica, Vol. 227, No. 8, pp. 2207-2232, 2016.

[36]        H. Moosavi, M. Mohammadi, A. Farajpour, S. H. Shahidi, Vibration analysis of nanorings using nonlocal continuum mechanics and shear deformable ring theory, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 1, pp. 135-140, 2011/10/01/, 2011.

[37]        M. Safarabadi, M. Mohammadi, A. Farajpour, M. Goodarzi, Effect of surface energy on the vibration analysis of rotating nanobeam, 2015.

[38]        M. Hasani, N. Rahbar, Application of thermoelectric cooler as a power generator in waste heat recovery from a PEM fuel cell – An experimental study, International Journal of Hydrogen Energy, Vol. 40, No. 43, pp. 15040-15051, 2015/11/16/, 2015.

[39]        M. Ni, M. K. H. Leung, K. Sumathy, D. Y. C. Leung, Potential of renewable hydrogen production for energy supply in Hong Kong, International Journal of Hydrogen Energy, Vol. 31, No. 10, pp. 1401-1412, 2006/08/01/, 2006.

[40]        H. Q. Nguyen, B. Shabani, Proton exchange membrane fuel cells heat recovery opportunities for combined heating/cooling and power applications, Energy Conversion and Management, Vol. 204, pp. 112328, 2020/01/15/, 2020.

[41]        M. Z. Malik, F. Musharavati, S. Khanmohammadi, A. H. Pakseresht, S. Khanmohammadi, D. D. Nguyen, Design and comparative exergy and exergo-economic analyses of a novel integrated Kalina cycle improved with fuel cell and thermoelectric module, Energy Conversion and Management, Vol. 220, pp. 113081, 2020/09/15/, 2020.

[42]        Z. Li, S. Khanmohammadi, S. Khanmohammadi, A. A. A. A. Al-Rashed, P. Ahmadi, M. Afrand, 3-E analysis and optimization of an organic rankine flash cycle integrated with a PEM fuel cell and geothermal energy, International Journal of Hydrogen Energy, Vol. 45, No. 3, pp. 2168-2185, 2020/01/13/, 2020.

[43]        N. Sarabchi, S. M. S. Mahmoudi, M. Yari, A. Farzi, Exergoeconomic analysis and optimization of a novel hybrid cogeneration system: High-temperature proton exchange membrane fuel cell/Kalina cycle, driven by solar energy, Energy Conversion and Management, Vol. 190, pp. 14-33, 2019/06/15/, 2019.

[44]        M. H. Ahmadi, A. Mohammadi, F. Pourfayaz, M. Mehrpooya, M. Bidi, A. Valero, S. Uson, Thermodynamic analysis and optimization of a waste heat recovery system for proton exchange membrane fuel cell using transcritical carbon dioxide cycle and cold energy of liquefied natural gas, Journal of Natural Gas Science and Engineering, Vol. 34, pp. 428-438, 2016/08/01/, 2016.

[45]        S. M. Seyed Mahmoudi, N. Sarabchi, M. Yari, M. A. Rosen, Exergy and Exergoeconomic Analyses of a Combined Power Producing System including a Proton Exchange Membrane Fuel Cell and an Organic Rankine Cycle, Sustainability, Vol. 11, No. 12, 2019.

[46]        V. Rezaee, A. Houshmand, Energy and Exergy Analysis of a Combined Power Generation System Using PEM Fuel Cell and Kalina Cycle System 11, Periodica Polytechnica Chemical Engineering, Vol. 60, pp. 98-105, 03/25, 2016.

[47]        M. Chahartaghi, B. A. Kharkeshi, Performance analysis of a combined cooling, heating and power system with PEM fuel cell as a prime mover, Applied Thermal Engineering, Vol. 128, pp. 805-817, 2018/01/05/, 2018.

[48]        P. Zhao, J. Wang, L. Gao, Y. Dai, Parametric analysis of a hybrid power system using organic Rankine cycle to recover waste heat from proton exchange membrane fuel cell, International Journal of Hydrogen Energy, Vol. 37, No. 4, pp. 3382-3391, 2012/02/01/, 2012.

[49]        S. Kaushik A, S. S. Bhogilla, P. Muthukumar, Thermal integration of Proton Exchange Membrane Fuel Cell with recuperative organic rankine cycle, International Journal of Hydrogen Energy, Vol. 46, No. 27, pp. 14748-14756, 2021/04/19/, 2021.

[50]        S. Toghyani, E. Afshari, E. Baniasadi, Performance evaluation of an integrated proton exchange membrane fuel cell system with ejector absorption refrigeration cycle, Energy Conversion and Management, Vol. 185, pp. 666-677, 2019/04/01/, 2019.

[51]        E. Baniasadi, S. Toghyani, E. Afshari, Exergetic and exergoeconomic evaluation of a trigeneration system based on natural gas-PEM fuel cell, International Journal of Hydrogen Energy, Vol. 42, No. 8, pp. 5327-5339, 2017/02/23/, 2017.

[52]        S. Marandi, F. Mohammadkhani, M. Yari, An efficient auxiliary power generation system for exploiting hydrogen boil-off gas (BOG) cold exergy based on PEM fuel cell and two-stage ORC: Thermodynamic and exergoeconomic viewpoints, Energy Conversion and Management, Vol. 195, pp. 502-518, 2019/09/01/, 2019.

[53]        I. Fakhari, A. Behzadi, E. Gholamian, P. Ahmadi, A. Arabkoohsar, Comparative double and integer optimization of low-grade heat recovery from PEM fuel cells employing an organic Rankine cycle with zeotropic mixtures, Energy Conversion and Management, Vol. 228, pp. 113695, 2021/01/15/, 2021.

[54]        M. D. Mirolli, Cementing Kalina cycle effectiveness, IEEE Industry Applications Magazine, Vol. 12, No. 4, pp. 60-64, 2006.

[55]        M. D. Mirolli, 2007, Ammonia-water based thermal conversion technology: Applications in waste heat recovery for the cement industry,

[56]        S. Ogriseck, Integration of Kalina cycle in a combined heat and power plant, a case study, Applied Thermal Engineering, Vol. 29, No. 14, pp. 2843-2848, 2009/10/01/, 2009.

[57]        X. Zhang, M. He, Y. Zhang, A review of research on the Kalina cycle, Renewable and Sustainable Energy Reviews, Vol. 16, No. 7, pp. 5309-5318, 2012/09/01/, 2012.

[58]        M. Fallah, S. M. S. Mahmoudi, M. Yari, R. Akbarpour Ghiasi, Advanced exergy analysis of the Kalina cycle applied for low temperature enhanced geothermal system, Energy Conversion and Management, Vol. 108, pp. 190-201, 2016/01/15/, 2016.

[59]        J. Szargut, 2005, Exergy Method: Technical and Ecological Applications, WIT Press,

[60]        V. Zare, S. M. S. Mahmoudi, M. Yari, On the exergoeconomic assessment of employing Kalina cycle for GT-MHR waste heat utilization, Energy Conversion and Management, Vol. 90, pp. 364-374, 2015/01/15/, 2015.

[61]        R. Zhar, A. Allouhi, A. Jamil, K. Lahrech, A comparative study and sensitivity analysis of different ORC configurations for waste heat recovery, Case Studies in Thermal Engineering, Vol. 28, pp. 101608, 2021/12/01/, 2021.

[62]        V. Jain, S. S. Kachhwaha, G. Sachdeva, Thermodynamic performance analysis of a vapor compression–absorption cascaded refrigeration system, Energy Conversion and Management, Vol. 75, pp. 685-700, 2013/11/01/, 2013.