تعداد نشریات | 209 |
تعداد شمارهها | 5,465 |
تعداد مقالات | 60,143 |
تعداد مشاهده مقاله | 98,807,473 |
تعداد دریافت فایل اصل مقاله | 78,829,630 |
بررسی تاثیر زمان تماس، نوع عصارهگیر و نسبت خاک به عصارهگیر در اندازه گیری مقدار گچ به روش استون | ||
تحقیقات آب و خاک ایران | ||
مقالات آماده انتشار، پذیرفته شده، انتشار آنلاین از تاریخ 21 اردیبهشت 1401 | ||
نوع مقاله: مقاله پژوهشی | ||
شناسه دیجیتال (DOI): 10.22059/ijswr.2022.332920.669111 | ||
نویسندگان | ||
کریم شهبازی ![]() | ||
1موسسه تحقیقات خاک و آب، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران، کرج، ایران | ||
2موسسه تحقیقات خاک و آب، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران | ||
چکیده | ||
گچ در خاک های نواحی خشک و نیمه خشک بهعنوان جزء اصلی خاک برخی از رفتارهای فیزیکی و شیمیایی خاک را تحت تاثیر قرار داده و به دلیل اثرات منفی بر اراضی کشاورزی و رشد گیاه، اندازه گیری دقیق غلظت آن برای مدیریت اراضی گچی بسیار حائز اهمیت است. بنابراین طی پژوهشی آزمایشگاهی برخی عوامل موثر بر اندازه گیری گچ به روش استون شامل زمان تماس، نسبت خاک به آب و عصارهگیرهای مختلف مطالعه شدند. نتایج نشان داد که انحلال گچ در خاک های گچی مصنوعی واکنشی سریع بوده و قسمت عمده گچ موجود در نمونه در مدت زمانی کمتر از 5/0 ساعت حل شد. عصاره گیری گچ در نسبتهای زیاد خاک به آب (200:1) باعث کمبرآورد در اندازهگیری گچ گردید. بطوریکه مقدار گچ اندازهگیری شده در زمان 0/5 ساعت در نمونههای 10، 20، 30، 40، 50، 60، 70، 80 و 100 درصد گچ به ترتیب 1-، 3/5، 9/6، 11/0، 22/4، 29/3، 39/6، 47/5 و 87/8 درصد نسبت به مقدار واقعی گچ در نمونه کم برآورد داشت. کاهش نسبت خاک به آب به 400:1 باعث بیشبرآورد بین 10-50 درصد گچ در نمونه-های با گچ کمتر از 50 درصد گردید. محلول های نمکی NaCl، KCl و MgCl2 حلالیت گچ را افزایش داده و باعث جبران کمبرآورد در اندازهگیری گچ بخصوص در نسبت 200:1 گردیدند. محلول های نمکی در نسبت پایین خاک به آب (400:1) در خاکهای طبیعی باعث بیش برآورد مقدار گچ شدند. هدایت الکتریکی (EC) µS/cm 1000 در محلول نهایی بعنوان EC بحرانی در اندازه گیری گچ بدست آمد. براساس نتایج بدست آمده، استفاده از آب مقطر بعنوان عصاره گیر، زمان تماس 0/5 ساعت و نسبت خاک به آب متغیر براساس محتوای گچ برای حصول EC کمتر از µS/cm 1000 بعنوان شرایط بهینه برای اندازه گیری گچ به روش استون توصیه میگردد. | ||
کلیدواژهها | ||
انحلال گچ؛ خاک های گچی؛ محلولهای نمکی؛ هدایت الکتریکی | ||
عنوان مقاله [English] | ||
The effect of contact time, extractant type, and soil to extractant ratio on gypsum determination by Acetone method | ||
نویسندگان [English] | ||
Karim Shahbazi1؛ Mostafa Marzi2؛ Leila Esmaeilzadeh2؛ Mehdi Beheshti2 | ||
1Soil and Water Research Institute, Agricultural Research, Education, and Extension Organization, Karaj, Iran | ||
2Soil and Water Research Institute, Agricultural Research, Education, and Extension Organization, Karaj, Iran | ||
چکیده [English] | ||
Gypsum is spread in soils of arid and semi-arid regions and controls the soil physiochemical properties when it exists as the main soil component. Due to the undesired effects of gypsum in agriculture and plant growth, the accurate determination of its concentration is very important for soil classification and land use management. In this study, the parameters affecting the gypsum determination by the acetone method, namely contact time, extractant to soil ratio, and different extractants, were investigated. Results revealed that the gypsum dissolution reaction was fast and most of the gypsum was dissolved in less than 0.5 h. Gypsum extracting with high extractant to soil ratios (1:200) had led to underestimation in the gypsum concentration. So that, the measured gypsum at 0.5 h extraction in soils with 10, 20, 30, 40, 50, 60, 70, 80, and 100% gypsum was underestimated by -1, 3.5, 9.6, 11.0, 22.4, 29.3, 39.6, 47.5, and 87.8% (according to the actual content) respectively. Decreasing the extractant to soil ratio to 1:400 overestimated (10 to 50%) the gypsum in the samples containing less than 50% gypsum. NaCl, KCl and MgCl2 solutions increased the gypsum solubility eliminated the underestimation in gypsum determination especially in 1:200 ratio. However, the use of salt solutions as extractants in the natural soils had led to overestimation at the higher extractant to soil ratios (1:400). The critical electrical conductivity (EC) in the measuring of gypsum by the Acetone method was 1000 µS/cm. According to the results, use of deionized water as the extractant, 0.5 h contact time, and variable soil to water ratio according the soil gypsum content and to reach the EC of lower than 1000 µS/cm were the optimum condition for determination of soil gypsum by the acetone method and therefore is recommended. | ||
کلیدواژهها [English] | ||
Electrical conductivity, Gypsiferous soils, Gypsum dissolution, Salt solutions | ||
آمار تعداد مشاهده مقاله: 33 |