مقایسۀ کارایی انواع مدل‌های رگرسیونی برای پیش‌بینی ثبات ابعاد چوب نراد تیمار حرارتی‌شده بر‌اساس شاخص‌های رنگ، زاویۀ تماس و کاهش جرم

[1]. Tarmian, A., and Mastouri, A. (2018). Water-repellent efficiency of thermally modified wood as affected by its permeability. Journal of Forestry Research, 29 (3), 859-867.

[2]. Fu, Z., Zhou, Y., Gao, X., Liu, H., and Zhou, F. (2019). Changes of water related properties in radiata pine wood due to heat treatment. Construction and Building Materials, 227 116692.

[3]. Sivrikaya, H., Tesařová, D., Jeřábková, E., and Can, A. (2019). Color change and emission of volatile organic compounds from Scots pine exposed to heat and vacuum-heat treatment. Journal of Building Engineering, 26 100918.

[4]. Fu, Z., Zhou, F., Gao, X., Weng, X., and Zhou, Y. (2020). Assessment of mechanical properties based on the changes of chromatic values in heat treatment wood. Measurement, 152 107215.

[5]. Sivrikaya, H., Hosseinpourpia, R., Ahmed, S. A., and Adamopoulos, S. (2020). Vacuum-heat treatment of Scots pine (Pinus sylvestris L.) wood pretreated with propanetriol. Wood Material Science & Engineering 1-9.

[6]. Ozsahin, S., and Murat, M. (2018). Prediction of equilibrium moisture content and specific gravity of heat treated wood by artificial neural networks. European journal of wood and wood products, 76 (2), 563-572.

[7]. Tiryaki, S., Bardak, S., Aydin, A., and Nemli, G. (2016). Analysis of volumetric swelling and shrinkage of heat treated woods: Experimental and artificial neural network modeling approach. Maderas. Ciencia y tecnología, 18 (3), 477-492.

[8]. Bekhta, P. (2020). Effect of heat treatment on some physical and mechanical properties of birch plywood. European Journal of Wood and Wood Products, 78 (4), 683-691.

[9]. Tiryaki, S., and Aydın, A. (2014). An artificial neural network model for predicting compression strength of heat treated woods and comparison with a multiple linear regression model. Construction and Building Materials, 62 102-108.

[10]. Van Nguyen, T. H., Nguyen, T. T., Ji, X., and Guo, M. (2018). Predicting color change in wood during heat treatment using an artificial neural network model. BioResources, 13 (3), 6250-6264.

[11]. Tiryaki, S., and Hamzaçebi, C. (2014). Predicting modulus of rupture (MOR) and modulus of elasticity (MOE) of heat treated woods by artificial neural networks. Measurement, 49 266-274.

[12]. Tiryaki, S., Özşahin, Ş., and Yıldırım, İ. (2014). Comparison of artificial neural network and multiple linear regression models to predict optimum bonding strength of heat treated woods. International Journal of Adhesion and Adhesives, 55 29-36.

[13]. Nasir, V., Nourian, S., Avramidis, S., and Cool. (2019). Prediction of physical and mechanical properties of thermally modified wood based on color change evaluated by means of “group method of data handling”(GMDH) neural network. Holzforschung, 73 (4), 381-392.

[14]. ASTM, A. (2009). D143-09: standard test methods for small clear specimens of timber. West Conshohocken, PA, USA: ASTM International.

[15]. ASTM, D. (2003). 2244. Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates. American Society for Testing and Materials, West Conshohocken, PA.

[16]. Mitsui, K., Takada, H., Sugiyama, M., and Hasegawa, R. (2001). Changes in the properties of light-irradiated wood with heat treatment. Part 1. Effect of treatment conditions on the change in color. Holzforschung, 55 (6), 601-605.

[17]. Zaman, A., Alen, R., and Kotilainen, R. (2000). Heat behavior of Pinus sylvestris and Betula pendula at 200-230 C. Wood and Fiber Science, 32 (2), 138-143.

[18]. Bekhta, P., and Niemz, P. (2003). Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood.

[19]. Jennings, J. D., Zink-Sharp, A., Frazier, C. E., and Kamke, F. A. (2006). Properties of compression-densified wood, Part II: surface energy. Journal of adhesion science and technology, 20 (4), 335-344.

[20]. Lewis, C. (1982). International and Business Forecasting Methods Butterworths: London.

[21]. Williams, P. (2001). Implementation of Near-infrared Technology. Near-Infrared Technology in the Agricultural and Food Industries, and Edition.

[22]. Aydin, G., Karakurt, I., and Hamzacebi, C. (2015). Performance prediction of diamond sawblades using artificial neural network and regression analysis. Arabian Journal for Science and Engineering, 40 (7), 2003-2012