- Amiri, M. J., Bahrami, M., Hamidifar, H., & Eslamian, S. (2016). Modification of furrow Manning’s roughness coefficient estimation by finite difference technique under surge and continuous flow. International Journal of Hydrology Science and Technology, 6(3), 226-237.
- Bahmani, O., Akhavan, S., Khoramian, M., & Gholizadeh Khalteh, G. (2020). Effect of different tillage methods and furrow spacing on soil hydraulic characteristics in furrow irrigation. Irrigation Sciences and Engineering, 43(1), 145-156. (in Persian)
- Chow, V. T. (1959). open-channel hydraulicd. New York. McGRAW-HILL Book Company.
- Clemmens, A. J., Eisenhauer, D. E., & Maheshwari, B. L. (2001). Infiltration and roughness equations for surface irrigation: How Form Influences Estimation. ASAE Meeting Paper. American Society of Agricultural and Biological Engineers.
- Ebrahimian, H. (2014). Soil infiltration characteristics in alternate and conventional furrow irrigation using different estimation methods. KSCE Journal of Civil Engineering, 18(6), 1904-1911.
- Enciso-Medina, J., Martin, D., & Eisenhauer, D. (1998). Infiltration model for furrow irrigation. Journal of Irrigation and Drainage Engineering, 124(2), 73-80.
- Esfandiari, M., & Maheshwari, B. L. (1998). Suitability of selected flow equations and variation of Manning’s n in furrow irrigation. Journal of Irrigation and Drainage Engineering, 124(2), 89-95.
- Grassi, C. J. (1972). Infiltration Characteristics Heavy-Textured Soil. Doctoral dissertation. Wageningen University. The Netherlands.
- Harun-ur-Rashid, M. (1990). Estimation of Manning ’ s roughness coefficient for basin and border irrigation. Agricultural Water Management, 18(1), 29-33.
- Izadi, B., & Wallender, w. w. (1985). Furrow hydraulic characteristics and infiltration. Transactions of the ASAE, 28(6), 1901-1908.
- Kamali, P., Ebrahimian, H., & Parsinejad, M. (2018). Estimation of Manning roughness coefficient for vegetated furrows. Irrigation Science, 36(6), 339-348.
- Kassem, M. A., & Ghonimy, M. I. (2011). Determination of Manning roughness coefficient for border irrigation system. Misr Journal of Agricultural Engineering, 28(2), 302-323.
- Katopodes, N. D., Tang, J., & Clemmens, A. J. (1990). Estimation of surface irrigation parameters. Journal of Irrigation and Drainage Engineering, 116(5), 676-696.
- Li, Z., & Zhang, J. (2001). Calculation of field Manning’s roughness coefficient. Agricultural Water Management, 49(1), 153-161.
- Mailapalli, D. R., Raghuwanshi, N. S., Singh, R., Schmitz, G. H., & Lennartz, F. (2008). Spatial and temporal variation of Manning’s roughness coefficient in furrow irrigation. Journal of Irrigation and Drainage Engineering, 134(2), 185-192.
- Nie, W.-B., Li, Y.-B., Zhang, F., Dong, S.-X., Wang, H., & Ma, X.-Y. (2018). A method for determining the discharge of closed-end furrow irrigation based on the representative value of Manning’s roughness and field mean infiltration parameters estimated using the PTF at regional scale. Water, 10(12), 1825.
- Nie, W., Fei, L., & Ma, X. (2014). Impact of infiltration parameters and Manning roughness on the advance trajectory and irrigation performance for closed-end furrows. Spanish Journal of Agricultural Research, 12(4), 1180-1191.
- Ramezani Etedali, H., Liaghat, A., & Abbasi, F. (2012). Evaluation of the evalue model for estimating Manning’s roughness in furrow irrigation. Irrigation and Drainage, 61(3), 410-415.
- Rezaverdinejad, V., Ahmadi, H., Hemmati, M., & Ebrahimian, H. (2016). Evaluation and comparison of different approaches of infiltration parameters estimation under different furrow irrigation systems and inflow regimes. Journal of Science and Technology of Agriculture and Natural Resources, 20(76), 161-176. (in Persian).
- Rodríguez, J. A., & Martos, J. C. (2010). SIPAR_ID: Freeware for surface irrigation parameter identification. Environmental Modelling & Software, 25(11), 1487-1488.
- Sedaghatdoost, A., & Ebrahimian, H. (2015). Calibration of infiltration, roughness and longitudinal dispersivity coefficients in furrow fertigation using inverse modelling with a genetic algorithm. Biosystems Engineering, 136(1), 129-139.
- Sepaskhah, A. R., & Bonder, H. (2002). Estimation of Manning roughness coefficient for bare and vegetated furrow irrigation. Biosystems Engineering, 83(3), 351-357.
- Trout, T. J. (1992). Flow velocity and wetted perimeter effects on furrow infiltration. Transactions of the American Society of Agricultural Engineers, 35(3), 855-863.
- USDA. (1974). SCS National Engineering Handbook: Irrigation. Border irrigation.
- Walker, W. R. (1987). Surface irrigation theory and practice. (1st ed.). New Jersey. Prentice-hall.
- Zarakani, K., Remazani Etedali, H., & Daneshkar Arasteh, P. (2020). Estimation of infiltaration parameters and Manning roughness coefficient under two continuous and cutback flows regims Keyvan. Journal of Water and Soil Resources Conservation, 9(2), 89-101. (in Persian)
|
