تعداد نشریات | 161 |
تعداد شمارهها | 6,532 |
تعداد مقالات | 70,501 |
تعداد مشاهده مقاله | 124,099,476 |
تعداد دریافت فایل اصل مقاله | 97,206,944 |
Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers | ||
Journal of Ultrafine Grained and Nanostructured Materials | ||
دوره 54، شماره 1، شهریور 2021، صفحه 51-57 اصل مقاله (1.16 M) | ||
نوع مقاله: Research Paper | ||
شناسه دیجیتال (DOI): 10.22059/jufgnsm.2021.01.05 | ||
نویسندگان | ||
zahra yousefi؛ Nafiseh Koohestani؛ danesh amiri؛ Robabeh Abdinia؛ ata Kamyabi-Gol؛ Elham Kamali Heidari* | ||
Department of Metallurgy and Materials Engineering, Ferdowsi University of Mashhad, Mashhad, Iran | ||
چکیده | ||
Electrospinning, stabilization and carbonization are three steps of synthesizing electrospun carbon nanofibers (CNF), using polyacrylonitrile (PAN) precursor. In this study, the effect of the stabilization temperature was studied on the morphology and chemical state of the electrospun PAN fibers, which were later carbonized to produce carbon nanofibers. the stabilization was carried out on electrospun PAN fibers, at different temperatures of 230 °C, 240 °C, 250 °C and 280 °C for 2h with a heating rate of 2 °C/min. Fourier transform infrared spectroscopy was used to inspect the progress of stabilization reactions. The crystallinity and composition was studied by X ray diffraction and scanning electron microscopy was used to observe the morphology of the fibers. The results showed that 230 oC is the best stabilization temperature in which not only all expected reactions take place but also the fibrous morphology is preserved. Higher temperatures led to destruction of the fibrous morphology. | ||
کلیدواژهها | ||
Electrospinning؛ PAN؛ Stabilization؛ CNF | ||
مراجع | ||
6. Begum HA, Khan KR. Study on the various types of needle based and needleless electrospinning system for nanofiber production. Int. J. Text. Sci. 2017;6:110-7. | ||
آمار تعداد مشاهده مقاله: 864 تعداد دریافت فایل اصل مقاله: 721 |