Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion | ||
| Journal of Ultrafine Grained and Nanostructured Materials | ||
| دوره 53، شماره 2، اسفند 2020، صفحه 177-182 اصل مقاله (2.24 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jufgnsm.2020.02.09 | ||
| نویسندگان | ||
| Aria Afsharnaderi؛ Mehrab Lotfpour؛ Mehdi Malekan* ؛ Massud Emamy | ||
| School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran. | ||
| چکیده | ||
| The impact of hot extrusion process on the grain refinement and tensile properties for the rare earth elements (RE) and strontium (Sr)-containing Mg-9Al-1Zn alloys was studied. Based on the microstructural analysis, the grain size values reduced after the hot extrusion process, compared to the cast alloys. Moreover, the tensile properties of the extruded alloys were remarkably higher than the cast alloys. These extraordinary results were related to the grain refinement by the dynamic recrystallization phenomenon, and fragmentation and distribution of the intermetallics. Moreover, the RE/Sr additions improved the grain size reduction, owing to the presence of fragmented Al11RE3 intermetallics. | ||
| کلیدواژهها | ||
| Mg alloys؛ Hot extrusion؛ Mechanical properties؛ Microstructure؛ Grain refinement | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 1,618 تعداد دریافت فایل اصل مقاله: 944 |
||