Sizing, Parametric Investigation and Analysis of Automated Sucker Rod Pump using Beam Pump Simulators | ||
| Journal of Chemical and Petroleum Engineering | ||
| مقاله 6، دوره 54، شماره 2، اسفند 2020، صفحه 235-251 اصل مقاله (1.52 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jchpe.2020.295689.1303 | ||
| نویسندگان | ||
| Charles Osaretin* 1؛ Stephen Butt2؛ M. Tariq Iqbal1 | ||
| 1Department of Electrical and Computer Engineering Faculty of Engineering and Applied Science Memorial University of Newfoundland St. John's, Newfoundland, Canada, A1B 3X5 | ||
| 2Department of Earth Sciences, Memorial University of Newfoundland , St. John's, Newfoundland, Canada, A1B 3X5. | ||
| چکیده | ||
| Reciprocating piston artificial lift systems are widely adopted especially, for onshore wells. Matching the pump mode to well and reservoir conditions reduces the pumping cost and increases the efficiency of production. Parameters influencing the energy requirement of sucker-rod lifted oil wells are investigated in this study, and new insights are provided for the parametric investigation of design variables required for sizing beam-pumped wells. Two (2) artificial lift simulators are integrated for automated sizing of beam-pumped systems. A sucker-rod artificial lift system is optimally sized for a case study oil well, to obtain the minimum API rating of the pumping unit, sustain the target production rate, and determine the corresponding minimum prime mover required to drive the pump sustainably. Compared to using a single simulator for the case study, the integrated approach reduces the damped and polished rod horsepower by 54.9% and 26.5% respectively, for a corresponding decrease in minimum NEMA D motor size by 38.6%. These key performance indicators demonstrate the benefits of simulator integration in automated sizing of beam pumps. | ||
| کلیدواژهها | ||
| Artificial Lift Simulator؛ Energy Requirement؛ Parametric Investigation؛ PROSPER؛ QRod؛ Sucker-Rod Pump | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 954 تعداد دریافت فایل اصل مقاله: 1,682 |
||