New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing | ||
| Journal of Ultrafine Grained and Nanostructured Materials | ||
| مقاله 7، دوره 52، شماره 2، اسفند 2019، صفحه 188-196 اصل مقاله (787.26 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jufgnsm.2019.02.07 | ||
| نویسندگان | ||
| Mir Saman Safavi* 1؛ Abolfazl Azarniya2؛ Mohammad Farshbaf Ahmadipour3؛ Mogalahalli Venkatesh Reddy4 | ||
| 1Faculty of Materials Engineering, Research Center for Advanced Materials, Sahand University of Technology, Tabriz, Iran. | ||
| 2Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran. Department of Materials Science and Engineering, National University of Singapore, Singapore. | ||
| 3Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran. | ||
| 4Department of Materials Science and Engineering, National University of Singapore, Singapore. Center of Excellence in Transportation Electrification and Energy Storage (CETEES), Hydro-Quebec, 1806, Lionel-Boulet Blvd., Varennes, QC J3X 1S1, Canada. | ||
| چکیده | ||
| Recently, high-performance lightweight materials with outstanding mechanical properties have opened up their way to some sophisticated industrial applications. As one of these systems, aluminum matrix composites/nanocomposites (AMCs) offer an outstanding combination of relative density, hardness, wear resistance, and mechanical strength. Until now, several additive manufacturing methods have been developed for fabrication of 3D metallic components among them, selective laser melting (SLM), electron beam melting (EBM), laser metal deposition (LMD), Wire+Arc additive manufacturing (WAAM), and ultrasonic additive manufacturing (UAM) are of prime significance. Unlike other methods, in ultrasonic additive manufacturing, the ultrasonic waves are used instead of applying the sintering process. This technique is well-known for its ability to produce 3D components by repeating the alternative welding and machining procedures at low temperatures. This is why it can overcome the technological issues arisen from the high-temperature sintering. The present review strives to provide an inclusive introduction to the principles of ultrasonic additive manufacturing method and recent advances in ultrasonic additive manufacturing of aluminum matrix composites/nanocomposites. Also, the challenges of this new emerging technique, i.e. its dependence to the applied weld power, is addressed in the paper. The authors attempt to give some perspectives to the researchers for further investigations in this new-emerging field. | ||
| کلیدواژهها | ||
| 3D printing؛ ultrasonic additive manufacturing؛ metal matrix composites؛ microstructural features؛ mechanical properties؛ microstructure evolution | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 2,805 تعداد دریافت فایل اصل مقاله: 1,464 |
||