تعداد نشریات | 162 |
تعداد شمارهها | 6,624 |
تعداد مقالات | 71,549 |
تعداد مشاهده مقاله | 126,921,926 |
تعداد دریافت فایل اصل مقاله | 99,969,179 |
ساختارهای انعطافپذیر؛ راهکاری در جهت کاهش معضلات عملکردی پوستههای متحرک | ||
نشریه هنرهای زیبا: معماری و شهرسازی | ||
مقاله 14، دوره 24، شماره 2، تیر 1398، صفحه 39-48 اصل مقاله (3.81 M) | ||
نوع مقاله: مقاله پژوهشی | ||
شناسه دیجیتال (DOI): 10.22059/jfaup.2019.258891.672029 | ||
نویسندگان | ||
کتایون تقی زاده* 1؛ محمدرضا متینی2؛ الناز کاکوئی3 | ||
1دانشکده معماری - دانشگاه تهران | ||
2دانشکده معماری، دانشگاه هنر | ||
3کارشناس ارشد تکنولوژی معماری، پردیس هنرهای زیبا، دانشگاه تهران، ایران. | ||
چکیده | ||
به منظور دستیابی به یک معماری پاسخگو که بتواند با شرایط پیرامونیاش سازگار باشد، رویکرد غالب آن است که معماران، طراحان و مهندسان سازه، تمرکز خود را بر روی طراحی و ساخت پوستههای ساختمانی متحرک متشکل از اعضای صلب و مفاصل مکانیکی قرار میدهند. گرچه ممکن است این شیوه مزایایی به همراه داشته باشد، اما میتواند با ایجاد مشکلات و ضعفهایی چون شکست و گسیختگی ناشی از تنشهای بالا در مفاصل، منجر به هزینه بالای تعمیر و نگهداری شود. هدف از تحقیق پیشرو، بهرهگیری از پتانسیل مکانیزمهای انعطافپذیر در طراحی و ساخت نماهای متحرک است که بدین منظور، پس از دستهبندی کاربرد مکانیزمهای انعطافپذیر در معماری در دو سطح (سطح نخست: جایگزینی آنها با مکانیزمهای صلب-پیکر و سطح دوم: طراحی مکانیزمی یکپارچه)، تمرکز این مقاله بر روی سطح نخست است. دستآورد این سطح که در قالب سه زیردسته ((1) حرکتهای انتقالی، (2) دورانی و (3) انتقالی- دورانی در مفاصل انعطافپذیر) و به روش شبیهسازی مورد بررسی قرار گرفت، طراحی، شبیهسازی رایانهای و ساخت سه مدل فیزیکی از پوستههای متحرک ساختمانی است که غالب مزایای ساختارهای انعطافپذیر چون یکپارچگی ساختار، کاهش تعداد اعضا و وزن سازه، کاهش چشمگیر تنش در مفاصل، هزینه تعمیر و نگاهداری و در نهایت توجیه اِقتصادی طرح را به همراه دارد. | ||
کلیدواژهها | ||
پوستههای ساختمانی متحرک؛ مکانیزم انعطافپذیر؛ مکانیزم صلب-پیکر؛ مکانیزم انعطافپذیر دوپایا | ||
مراجع | ||
متینی، محمدرضا (1394)، بهرهگیری از الگوهای طبیعت برای طراحی ساختارهای تغییرپذیر خمشو در معماری، نشریه هنرهای زیبا-معماری و شهرسازی، دوره 20، شماره 1، صص 67-80. Burry M (2003), Between Surface and Substance, Architectural Design, Surface Consciousness, Vol. 73, No. 2, pp. 8-19.
Chun, M.K (2007), Investigation into the Cause of Pneumatic Actuator Failure on the HypoSurface, BSc thesis, Massachusetts Institute of Technology.
Compliant Mechanisms Research; Brigham young university (2015), http://compliantmechanisms.byu.edu/content/intro-compliant-mechanisms.
Cromvik C. (2007), Numerical Folding of Airbags Based on Optimization and Origami, Master’s thesis, Chalmers University of Technology and G¨oteborg University, Sweden.
Demaine E & O’Rourke J (2007), Geometric Folding Algorithms, Cambridge University Press, ????.
Deshmukha, Bhagyesh; Pardeshib, Sujit; Mistryc, Roohshad; Kandharkard, Sachin & Waghe Santosh (2014), Development of a Four bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM), Procedia Material Science, Vol.6, pp. 1034-1039.
Elkhayat, Youssef Osama (2014), Interactive Movement In Kinetic Architecture, Journal of Engineering Sciences, Vol. 42, No.3, pp.816-845.
Golabchi M. R & Guest S. D (2009), Morphing Multistable Textured Shells, Proc. Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium, Valencia. Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures.
Greenberg, H. C; Gong, M. L; Howell, L. L & Magleby, S. P (2011), Origami and Compliant Mechanisms, Conference Paper: Second International Symposium on Compliant Mechanisms at Delft, The Netherlands, pp.1-7.
Grosso, A. E & Del, Basso P (2010), Adaptive Building Skin Structures, Smart Materials and Structures, Vol.19, No.12, pp.1-12.
Howell Larry, L (2001), Compliant Mechanisms, John Wiley and Sons, New York.
Howell, Larry; L, Spencer; P, Magleby & Brian M. Olsen (2013), Handbook of Compliant Mechanisms, A John Wiley & Sonrs, Ltd., Publication.
Jacobsen, Joseph; O, Larry; L, Howell, Spencer & P. Magleby (2007), Components for the Design of Lamina Emergent Mechanisms, ASME 2007 International Mechanical Congress and Exposition, Mechanics of Solids and Structures, Vol.10, pp.165-174.
Jensen, Brian; D, Larry & L, Howell (2004), Bistable Configurations of Compliant Mechanisms Modeled Using Four Links and Translational Joints, Journal of Mechanical Design, Vol.126, Issue 4, pp.657-666.
Knippers, Jan & Tomas, Speck (2012), Design and construction principles in nature and architecture, IOPscience, Bioinspiration & Biomimetics, Volume7, No.1, pp. ?????.
Lienhard, Julian (2014), Bending-Active Structures, Form-finding Strategies Using Elastic Deformation in Static and Kinetic Systems and The Structural Potentials Therein, Doctoral Dissertation in Stuttgart University, ITKE.
Megahed, Naglaa Ali (2017), Understanding Kinetic Architecture: Typology, Classification, and Design Strategy, Architectural Engineering and Design Management, Vol.13, Issue2, pp.?????.
Milojevic, Andrija (2011), Compliant bistable mechanisms, Conference Paper at Kraljevo, Serbia, June 2011, pp. 181-186. Moloney, Jules (2011), Designing Kinetics for Architectural Facades, Routledge Taylor & Francis Group, London and New York.
Sample, H (2012), A Brise-Soleil without a Building, In Matter: Material Processes in Architectural Production; Edited by Borden G.P. & Meredith M., Routledge, Oxon, pp. 329-339.
Schittich, C (2001), In Detail: Building Skins—Concepts, Layers, Materials, Birkhauser, Basel.
Sharaidin, Kamil (2014), Kinitic Façade: Towards design for Environmental Performance, Presented to the School of Architecture and Design RMIT University in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy.
Ritter, Axel (2007), Smart Materials in Architectur; InteriorArchitecture and Design, Birkhauser Publication, Basel, Berlin, Boston.
Schleicher, Simon; Julian, Lienhard; Simon, Poppinga; Thomas, Speck & Jan, Knippers (2014), A Methodology for Transferring Principles of Plant Movements to Elastic Systems in Architecture, Computer-Aided Design, Vol.60, pp.105-117.
Tachi, T (2010), Rigid-Foldable Thick Origami, in: Origami 5: The 5th International Conference on Origami in Science Mathematics and Education, ?????.
PEI, Xu; YU, Jingjun; ZONG, Guanghua & BI, Shusheng (2014), Design of Compliant Straight-line Mechanisms Using Flexural Joints, Chinese Journal of Mechanical Engineering, Vol. 27, No. 1, pp. 146-153.
| ||
آمار تعداد مشاهده مقاله: 1,620 تعداد دریافت فایل اصل مقاله: 2,960 |