پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شمارهها | 6,228 |
| تعداد مقالات | 67,750 |
| تعداد مشاهده مقاله | 115,081,581 |
| تعداد دریافت فایل اصل مقاله | 89,820,323 |
Calibration of Load and Resistance Factors for Reinforced Concrete | ||
| Civil Engineering Infrastructures Journal | ||
| مقاله 12، دوره 51، شماره 1، شهریور 2018، صفحه 217-227 اصل مقاله (1.38 M) | ||
| نوع مقاله: Technical Notes | ||
| شناسه دیجیتال (DOI): 10.7508/ceij.2018.01.012 | ||
| نویسندگان | ||
| Jala Akbari* 1؛ Faezeh Jafari2 | ||
| 1Malayer University | ||
| 2Department of Civil Engineering, Malayer University | ||
| چکیده | ||
| Current approach for designing of reinforced concrete members is based on the load and resistance factor. However the load and resistance parameters are random variables, the constant values have been designated for them in the designing procedure. Assuming these factors as the constants, will be led to the unsafe and uneconomical designs. Safe designing of structures requires appropriate recognition of the effective parameters and their uncertainties. Therefore, this achievement is possible through clarifying the effective design parameters and applying risk-based design methods. The main purpose of this paper is reliability based design of the reinforcement concrete structures under bending action. Rectangular sections with tension rebars (singly reinforced), rectangular sections with tension and also compression rebars (doubly reinforced) and T-shape sections are designed based on probabilistic methods. The appropriate tool for reliability calculations is selected based on pros and cons of each method. Evaluation of the load and the resistance factors for all mentioned beams is the next goal of this investigation. In this research, the steel usages for desired safety level are determined through the produced graphs. Using the proposed methodologies, the economic and fully probabilistic design of the concrete beams for bending is now available. | ||
| کلیدواژهها | ||
| Load and Resistance Factors؛ Monte-Carlo simulation؛ Reinforced Concrete Beam؛ Reliability-Based Design؛ Safety Factor | ||
| مراجع | ||
|
Arab, H.G., Ghasemi, M.R., Rashki, M. and Miri, M. (2013). “Enhancing weighted uniform simulation for structural reliability analysis”, International Journal of Optimization in Civil Engineering, 3(4), 635-651.
Bentz, E.C., Vecchio, F.J. and Collins, M.P. (2006). “Simplified modified compression field theory for calculating shear strength of reinforced concrete elements”, ACI Structural Journal, 103(4), 614-625.
Backes, M.R., Fernández Ruiz, M., and Muttoni, A. (2014). “Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs”, Proceeding of the 10th Fib International PhD Symposium in Civil Engineering, Quebec, 29(2), 403-411.
Jensen, D.F. (2014). “Reliability analysis for shear in lightweight reinforced concrete bridges using shear beam database”, M.Sc. Thesis, Utah State University.
Lu, R., Luo, Y. and Conte, J.P. (1994). “Reliability evaluation of reinforced concrete beams”, Structural Safety, 14(4), 277-298.
Marefat, M.S. and Vafaei, M. (1999). “Direct probabilistic design of reinforced concrete flexural sections using digital simulation”,Esteghlal Journal, 18(2), 13-22 (in Persian).
McCormac, J.C. and Brown, R.H. (2015). Design of reinforced concrete, John Wiley & Sons.
NBS (2011), Analysis and design of reinforced concrete buildings, National Building Standard, Ministry of Housing and Urban Development Publisher, Part 9, Iran.
Nowak,A. and Kaszyńska.M. (2011). “Target reliability for new, existing and historical structures”, Czasopismo Techniczne Technical Transactions-Civil Engineering, 19, 219-228.
Paik, I., Shin, S. and Shim, C. (2008). “Reliability-based code calibration and features affecting probabilistic performance of concrete bridges”, Proceedign of International Fib Symposium, 21(8), 19-26.
Paxton, P., Curran, P.J., Bollen, K.A., Kirby, J. and Chen, F. (2001). “Monte Carlo experiments: Design and implementation”, Structural Equation Modeling, 8(2), 287-312.
Porco, F., Uva, G., Sangirardi, M. and Casolo, S. (2013). “About the reliability of punching verifications in reinforced concrete flat slabs”, Open Construction and Building Technology Journal, 7, 74-87.
Rashki, M., Miri, M. and Moghaddam, M.A. (2012). “A new efficient simulation method to approximate the probability of failure and most probable point”, Structural Safety, 39, 22-29.
Rashki, M., Miri, M. and Moghaddam, M.A. (2014). “Closure to a new efficient simulation method to approximate the probability of failure and most probable point”,Structural Safety, 46, 15-16.
Ravindra, M.K., Lind, N.C. and Siu, W. (1974). “Illustrations of reliability-based design”, Journal of the Structural Division, 100(10), 779-783.
Sanaee, E., Shayanfar, M.A. and Mohammahd Zadeh. (2003). “Structural reliability analysis using combinatorial simulation techniques”, Journal of the Engineering Faculty, Ferdowsi University, Mashad, Iran, 11(2), 43-57, (in Persian).
Shao, L. and Li, C.Q. (2007). “Reliability based asset management strategy for concrete infrastructure”, International Journal of Materials and Structural Reliability, 5(1), 13-28.
Trezos, C.G. and Thomos, G.C. (2002), “Reliability based calibration of the Greek seismic code”, Workshop on Reliability Based Code Calibration, Joint Committee on Stractural Safety (JCSS), Swiss Federal Institute of Technology, ETH Zurich, Switzerland, March 21-22. | ||
|
آمار تعداد مشاهده مقاله: 506 تعداد دریافت فایل اصل مقاله: 707 |
||