بهینه‌سازی عملکرد تیغه قلمی مورد استفاده در خاک ورز مرکب

Arvidsson, J., Keller, T., & Gustafsson, K.. (2004). Specific draught for mouldboard plough, chisel plough and disc harrow at different water contents. Soil and Tillage Research, 79(2), 221-231.

Godwin, R. (2007). A review of the effect of implement geometry on soil failure and implement forces. Soil and Tillage Research, 97(2), 331-340

Grant, C., & Lafond, G. (1993). The effects of tillage systems and crop sequences on soil bulk density and penetration resistance on a clay soil in southern Saskatchewan. Canadian Journal of Soil Science, 73(2), 223-232.

Keller, T., Arvidsson, J., & Dexter, A.R. (2007). Soil structures produced by tillage as affected by soil water content and the physical quality of soil. Soil and Tillage Research, 92(1), 45-52.

McKyes, E., & Maswaure, J. (1997). Effect of design parameters of flat tillage tools on loosening of a clay soil. Soil and Tillage Research, 43(3), 195-204.

McKyes, E., & Ali, O. S. (1977). The cutting of soil by narrow blades. Journal of Terramechanics, 14(2), 43- 58.

Raoufat, M., &  Mashhadi, H. (1999). Determine the optimal distance between the para plow blades to achieve desired tillage. Iranian Journal of Agriculture Science, 2(30), 319-330. (In Farsi with English abstract).

Regional Network for Agricultural Machinery. (1983). RNAM test codes and procedures of farm machinery. Technical Series No. 12 (p. 129). Bangkok: Thailand.

Salar, M., Esehaghbeygi, A., & Hemmat, A. (2013). Soil loosening characteristics of a dual bent blade subsurface tillage implement. Soil and Tillage Research, 134, 17-24.

Stafford, J. V. (1979). The performance of a rigid tine in relation to soil properties and speed. Journal of Agricultural Engineering Research, 24(1), 41-56.

Stafford, J. V. (1981). An application of critical state soil mechanics: The performance of rigid tines. Journal of Agricultural Engineering Research, 26(5), 387-401.