بررسی رنگ‏ بری خمیرکاغذ مرکب‏ زدایی‌شدۀ مخلوط کاغذ روزنامه و مجلۀ باطله با پراکسید هیدروژن

[1]. Ghasemian, A., and Khalili, A. (2012). Fundamentals and Procedures of Paper Recycling, Aeij Press, Tehran.

[2]. Azad Falah, M., Mirzazad, F., and Hamzeh, Y. (2012). Influence of recycling on chemical properties and hornification of CMP and NSSC pulps. Iranian Journal of Wood and Paper Industries, 3(1):99-108.

[3]. Mirshokrai, A. (2001). Guide to waste paper. Tehran Aiezh Press. 2^nd Edition. 140pp.

[4]. Latibari, A., Khosravani, A., and Rahmaninia, M. (2007). Technology of Paper Recycling, Aeij Press, Tehran.

[5]. Ghasemian, A., Resalati, H., and Pinder, K. (2004). Deinking of ONP and OMG, Part 1: Comparison of properties of ONP and OMG deinked compared to local CMP pulp. Iranian Journal of Natural Resources, 57(3): 537-550.

[6]. Akbarpour, I., Resalati, H., and Saraeian, A.R. (2010). Investigation on The deinkability of old newspaper. Iranian Journal of Wood & Forest Science and Technology, 17(2): 73-87.

[7]. Ghasemian, A., and Akbarpour, I. (2011). The strategy of paper recycling and its position on supplying the lignocellulosic materials required for local pulp and paper industries. 1^st Road Map Conference for Supplying of Raw Material and Development of Wood and paper Industry at Horizon 1404, p.4.

[8]. Gullichsen, J., Hanna, P. (2000). Recycle fiber and deinking. Book 7, Papermaking Science and Technology, Fapet Oy, Helsinki, Finland, 427p.

[9]. Mirshokrai, A. (2000). Handbook of Pulp and Paper Technology. 2^nd Ed., Aeij, Tehran, 520p (In Persian)

[10]. Bajpai, P. 2006. Environmentally benign approaches for pulp bleaching. The Center for Industrial Research Development Patiala, India, 289p.

[11]. Akbarpour, I., Ghaffari, M., and Ghasemian, A. (2013). Effect of sodium silicate on the optical and physical properties of ONP deinked pulp. Iranian Journal of Wood & Forest Science and Technology, 19(4): 163-169.

[12]. Ghasemian, A., Ghaffari, M., and Akbarpour, I. (2011). Effect of organic complex of polyhydroxyl acrylic acid and sodium Salt on optical and physical properties of ONP deinked pulp. Iranian Journal of Wood & Forest Science and Technology, 17(2): 89-102.

[13]. Welt, T. (1996). Enzymatic deinking effectiveness and mechanisms. Doctoral dissertation. The Institute of Paper Science and Technology, 19(7): 335-349.

[14]. Johnson, D.A., Park, S., Genco, G.M., Gibson, A., Branch , B., and Wajer, M. (2002). Hydrogen peroxide bleaching of TMP pulps using Mg(OH)₂. Tappi Pulping Conference Proceedings, San Diego, September, P: 8-11.

[15]. Akbarpour, I., and Resalati, H .(2011) .Utilization of organic complex of glanapone stab rather than sodium silicate in peroxide bleaching of mixed hardwood CMP pulp. Iranian Journal of Wood and Paper Science Research, 26(2): 193-217.

[16]. Joachimides, T., Hache, M. (1991). Bleaching deinking pulp. Tappi Journal, 91, 211-216.

[17]. Daneault, C., Leduc, C. (1995). Bleaching efficiency of formamidine sulfinic acid (FAS) in comparison to hydrosulfite, borohydride, and peroxide in one and two stages. Tappi Journal, 78 (7): 97-106.

[18]. Tschirner, U., Wang, D. (1998). Hydrogen peroxide bleaching of recycle fiber. Paprican, Progress in Paper Recycling, 8(1):15-25.

[19]. Ghasemian, A., Resalati, H., Enayati, A.A., and Pinder, K. (2006). ONP/OMG deinking, Part 2: effcet of DIP use on the properties of local CMP pulp. Iranian Journal of Natural Resources, 59 (3): 727-740.

[20]. Nishi, K.B., Nguyen, K.L. (2005). Charge accepts of hydrogen peroxide bleached deinked pulp. Journal of Colloids & Surfaces, 262 (1-3): 232–237.

[21]. Aryaie Monfared, M.H., Resalati, H., and Zeinali, F. (2013). Assessment of flotation time effect on appearance properties of chemical and enzymatic deinked pulp by reverse power fit equation. Iranian Journal of Wood & Forest Science and Technology, 19(4):137-150.

[22]. Akbarpour, I., Resalati, H., and Saraeian, A.R. (2011). Investigation on the physical and mechanical properties of waste newspaper deinked. Iranian Journal of Wood and Paper Science Research, 26(2):243-255.

[23]. MacDonald, R.G., and Franklin, J.N. (1986). Textbook of Pulp and Paper Manufacture: Volume 3, Mcgraw-Hill Inc; 2^nd Edition, 1966p.

[24]. Helmling, O., Süss, U., Eul, W., 1986. Upgrading of waste paper with hydrogen peroxide. In: Tappi Pulping Conference, Proceedings, Tappi Press, Atlanta, p. 407.

[25]. Suess, H.A. (2010). Pulp Bleaching Today. Library of Congress Cataloging– in Publication Data, ISBN: 978-3-11020737-8, 309p.

[26]. Afra, E. (2003). Properties of Paper. Agricultural Sciences Press, 392p. (In Persian).

[27]. Alanko, K., Paulapuro, H., and Stenius, P. (1995). Recyclability of thermomechanical pulp fibers. Journal of Paperi Puu. 77(5): 315-328.

[28]. Jiang, Z.H., Van Lierop, B., and Berry, R. (2000). Hexenuronic acid groups in pulping and bleaching chemistry, Tappi Journal., 83(1), 167-175.