سامانه پشتیبانی خدمات اطلاعات

  اخبار و اعلانات

 آمار

تعداد نشریات158
تعداد شماره‌ها6,228
تعداد مقالات67,749
تعداد مشاهده مقاله115,078,183
تعداد دریافت فایل اصل مقاله89,815,752
Chamani, Amin, Rasouli, Vamegh. (1392). A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies. , 47(1), 81-90. doi: 10.22059/ijmge.2013.50092
Amin Chamani; Vamegh Rasouli. "A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies". , 47, 1, 1392, 81-90. doi: 10.22059/ijmge.2013.50092
Chamani, Amin, Rasouli, Vamegh. (1392). 'A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies', , 47(1), pp. 81-90. doi: 10.22059/ijmge.2013.50092
Chamani, Amin, Rasouli, Vamegh. A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies. , 1392; 47(1): 81-90. doi: 10.22059/ijmge.2013.50092

A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies

International Journal of Mining and Geo-Engineering
مقاله 7، دوره 47، شماره 1، شهریور 2013، صفحه 81-90    اصل مقاله (895.04 K)
نوع مقاله: Research Paper
شناسه دیجیتال (DOI): 10.22059/ijmge.2013.50092
نویسندگان
Amin Chamani* ؛ Vamegh Rasouli
Department of Petroleum Engineering, Curtin University, ARRC Building, 26 Dick Perry Avenue, Kensington, WA, 6151, Australia.
چکیده
The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a continuation of a previous study investigating the elastic behaviour of geomaterial, the elasto-plastic responses of geomaterial were studied. A 3D finite element code (FEM) was developed, which can consider different constitutive models. The code features were explained and some case studies were presented to validate the output results of the code. The numerical model was, then, applied to study the development of the plastic zone around a horizontal porous formation subjected to the injection of gas. The model is described in detail and the results are presented. It was observed that by reducing the cohesion of rocks the extension of the plastic zone increased. Comparing to the elastic model, the ability to estimate the extension of the yield and failure zone is the main advantage of an elasto-plastic model.
کلیدواژه‌ها
Elasto-Plastic؛ FEM؛ gas injection؛ plastic zone؛ porous reservoir
آمار
تعداد مشاهده مقاله: 2,294
تعداد دریافت فایل اصل مقاله: 2,679


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب