Hydrodynamics of Sieve Tray Distillation Column Using CFD Simulation | ||
| Journal of Chemical and Petroleum Engineering | ||
| مقاله 5، دوره 49، شماره 2، اسفند 2015، صفحه 119-129 اصل مقاله (622.46 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jchpe.2015.1805 | ||
| نویسندگان | ||
| Mozhgan Movahedi Parizi؛ Rahbar Rahimi* | ||
| Department of Chemical Engineering, Shahid Nikbakht’s Faculty of Engineering, University of Sistan and Baluchestan, Sistan and Baluchestan, I. R. Iran | ||
| چکیده | ||
| Sieve trays are widely used in the gas- liquid contactors such as distillation and absorption towers. In this article, a three-dimensional, two phase CFD model using Euler-Euler framework was developed to simulate a distillation tower with two sieve trays. Hydrodynamic simulation of air and water system in different rates of gas phase was carried out and velocity distribution parameters, clear liquid height and froth height were calculated and compared to the experimental data and the literature simulation result. Liquid velocity distributions on the two trays were found to be in relatively good agreement with experimental data. It was found that heights of accumulated liquid in the down-comers are not equal. | ||
| کلیدواژهها | ||
| CFD؛ Distillation؛ Hydrodynamics؛ Sieve Tray | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 2,549 تعداد دریافت فایل اصل مقاله: 3,579 |
||