اثر فشرده‌‌سازی بر ویژگی‌های فیزیکی و مکانیکی چوب نخل خرما اشباع شده با رزین ملامین‌فرم‌الدهید

[1] Shalbafan, A., Jafarnezhad, S. & Luedtke, J. (2018). Evaluation of low-density hybrid panels using expandable granules: effect of granules diameter and content. European Journal of Wood and Wood Products, 76(5), 1505-1514.

[2] Goleman, H. (2019). Investigation of the possibility of designing and manufacturing standard table and chair using palm trunk. Iranian Journal of Wood and Paper Industries, 10(4), 575-587. (In Persian)

[3] Hegazy, S., Ahmed, K. & Hiziroglu, S. (2015). Oriented strand board production from water-treated date palm fronds. BioResources, 10(1), 448-456.

[4] Mohebby, B., Sharifnia-Dizboni, H. & Kazemi-Najafi, S. (2009, April). Combined hydro-thermo-mechanical modification (CHTM) as an innovation in mechanical wood modification. In: Proceedings of the 4th European Conference on Wood Modification (ECWM4), Stockholm, Sweden, pp. 353-360.

[5] Mehmandoost, M. & Khazaian, A. (2014). The effect of chemical treatment and compression percent on mechanical properties of Paulownia compressed wood. Iranian Journal of Wood and Paper Industries, 5(2), 59-70. (In Persian)

[6] Altgen, M., Altgen, D., Klüppel, A. & Rautkari, L. (2020). Effect of curing conditions on the water vapor sorption behavior of melamine formaldehyde resin and resin-modified wood. Journal of Materials Science, 55(25), 11253-11266.

 [7] Inoue, M., Ogata, S., Kawai, S., Rowell, R.M. and Norimoto, M., 1993. Fixation of compressed wood using melamine-formaldehyde resin. Wood and Fiber Science, 25(4), 404-410.

[8] Lykidis, C., Moya, R. & Tenorio, C., 2020. The effect of melamine formaldehyde impregnation and hot-pressing parameters on the density profile of densified poplar wood. European Journal of Wood and Wood Products, 78(3), 433-440.

[10[ Ahmadi, P., Afhami Sisi, D., Pourtahmasebi, K. & Izadiar, S. (2019). Physical and mechanical properties of poplar wood impregnated with melamine–formaldehyde resin. Journal of Forest and Wood Products, 72(3), 261. (In Persian)

[11] Ahamad, W.N., Salim, S., Lee, S.H., Abdul Ghani, M.A., Mohd Ali, R.A., Md Tahir, P., Fatriasari, W., Antov, P. & Lubis, M.A.R., 2023. Effects of compression ratio and phenolic resin concentration on the properties of laminated compreg inner oil palm and sesenduk wood composites. Forests, 14(1), 83.

[12] Hartono, R., Hidayat, W., Wahyudi, I., Febrianto, F., Dwianto, W., Jang, J. & Kim, N. (2016). Effect of phenol formaldehyde impregnation on the physical and mechanical properties of soft-inner part of oil palm trunk. Journal of the Korean Wood Science and Technology, 44(6), 842-851.

[13] Mangurai, S.U.N.M., Hermawan, D., Hadi, Y.S., Sulastiningsih, I.M., Basri, E., Abdillah, I.B., Maulana, M.I., Purusatama, B.D., Park, S.Y., Lee, S.H., & Febrianto, F. (2022). Effect of densification on the physical and mechanical properties of the inner part of oil palm trunk impregnated with methylene diphenyl diisocyanate. Scientific Reports, 12(1), 15350

[14] Sharma, S.K., & Kelkar, B.U., (2021). Effect of densification on certain physical and mechanical properties of inner soft wood of Borassus flabellifer L. Journal of the Indian Academy of Wood Science, 18(1), 39-44.

 [15] Lykidis, C., Kotrotsiou, K. & Tsichlakis, A. (2020). Reducing set-recovery of compressively densified poplar wood by impregnation–modification with melamine–formaldehyde resin. Wood Material Science & Engineering, 15(4), 1-9.

[16] Merline, D.J., Vukusic, S. & Abdala, A.A. (2013). Melamine formaldehyde: curing studies and reaction mechanism. Polymer Journal, 45(4), 413-419.

 [17] Ahmadi, P., Ebrahimi, Gh. Ashori, A. (2026). Enhanced properties of the inner part of date palm wood through double‑stage treatment: synergistic effects of low‑viscosity melamine–formaldehyde resin impregnation and densification. Wood and Fiber Science, 72(3), 1-14

 [18] Yasuda, R. & Minato, K. (1995). Chemical modification of wood by non-formaldehyde cross-linking reagents. Wood Science and Technology, 28(2), 101-110.

[19] Choowang, R. & Hiziroglu, S. (2015). Properties of thermally-compressed oil palm trunks (Elaeis guineensis). Journal of Tropical Forest Science, 27(1), 39-46.

[20] Sulaiman, O., Salim, N., Nordin, N.A., Hashim, R., Ibrahim, M. & Sato, M. (2012). The potential of oil palm trunk biomass as an alternative source for compressed wood. BioResources, 7(2), 2688-2706.

[21] Behr, G., Bollmus, S., Gellerich, A. & Militz, H. (2017). Improvement of mechanical properties of thermally modified hardwood through melamine treatment. Wood Material Science and Engineering, 13(5), 262-270.

[22] Epmeier, H., Westin, M., Rapp, A.O. & Nilsson, T. (2003). Comparison of properties of wood modified by eight different methods: durability, mechanical and physical properties. In: Proceedings of the First European Conference on Wood Modification, April 2003, Ghent, Belgium, pp. 121-142.

[23] Khalil, H.P.S., Amouzgar, P., Jawaid, M., Hassan, A., Ahmad, F., Hadiyana, A. & Dungani, R. (2012). New approach to oil palm trunk core lumber material properties enhancement via resin impregnation. Journal of Biobased Materials and Bioenergy, 6(3), 299-308.