Integrated analysis method for rock slope stability of the deep open pits

[1]. Ali MA and Morteza O (2014) Determination and stability analysis of ultimate open-pit slope under geomechanical uncertainty. International Journal of Mining Science and Technology, 24 (1): 105-110.

[2]. Barla M, Piovano G and Grasselli G (2012) Rock slide simulation with the combined finite-discrete element method. International Journal of Geomechanics, 12 (6):711–721.

[3]. Basha BM and Moghal AAB (2013) Load resistance factor design (LRFD) approach based seismic design of rock slope against wedge failure. Geo-Congress 2013, ASCE Held 3-7 March, 2013, San Diego, California, USA.

[4]. Bowa VM and Xia Y (2018) Stability Analyses of Jointed Rock Slopes with Counter-tilted Failure Surface Subjected to Block Toppling Failure Mechanisms. Arabian Journal for Science and Engineering ,43(10): 5315-5331

[5]. Bowa VM and Kasanda T (2020) Wedge Failure Analyses of the Jointed Rock Slope Influenced by Foliations. Geotechnical and Geological Engineering, 38(5): 4701-4710

[6]. Bowa VM (2020) Wedge Sliding Analysis of the Rock Slope Subjected to Uplift Forces and Surcharge Loads Conditions. Geotechnical and Geological Engineering, 38(1): 367–374.

[7]. Chen C, Xia YY and Bowa VM (2017) Slope stability analysis by polar slice method in rotational failure mechanism. Computational and Geotechnical engineering, 81(1):188–194

[8]. Chen H and Guo Q (2022) Evaluation of Slope Stability within the Influence of Mining Based on Combined Weighting and Finite Cloud Model. International Journal of Energy, Exploration& Exploitation, 41(2):23-29.

[9]. Deng DP (2020) Limit equilibrium solution for the rock slope stability under the coupling effect of the shear dilatancy and strain softening. International Journal of Rock Mechanics and Mining Science, 134(1):104-121.

[10]. Firincioglu BS and Ercanoglu M (2021) Insights and perspectives into the limit equilibrium method from 2D and 3D analyses. Engineering Geology, 281 (1):571–578.

[11]. Gong WP and Bowa VM (2021) Analytical technique for stability analyses of the rock slope subjected to slide head toppling failure mechanisms considering groundwater and stabilization effects. International Journal of Geo-Engineering, 39(8): 5753-5765

[12]. Pham VS and Nguyen L (2024) A Novel Method for Spatial Structural Kinematic Analysis. International research journal of innovations in engineering and technology. https://doi.org/10.47001/irjiet/2024.808019

[13]. Khosravi MH, Sarfaraz H, Esmailvandi MA and Pipatpongsa T (2017) A numerical analysis on the performance of counter-weight balance on the stability of undercut slopes. International Journal of Mining and Geo-Engineering, 51(1), 63-69.

[14]. Kiriia R,Andrii A and Novikov L(2024) Influence of open pit depth on the choice of conveyor transport type.Geotehničeskaâ mehanika National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka),168(1): 97-104.

[15]. Lancine D, Chang SG and Bowa MV (2020) Influence of rainfall pattern on the slope stability of the Lumwana (the Malundwe) Open Pit. Geotechnical and  Geological  Engineering, 38:1337–1346.

[16].  Li X, Li D, Xu, Y, Feng, X (2020) A DFN based 3D numerical approach for modeling coupled groundwater flow and solute transport in fractured rock mass. International. Journal of Heat Mass Transfer, 149:119-129.

[17]. Muhammad S, Fourie A (2014) The effect of rainfall patterns on the mechanisms of shallow slope failure. International Journal of Science and Technology, 31:2088–9860.

[18]. Nelson SA (2013) Class notes on slope stability, triggering events and mass movement. Hazards, Tulane University, Pp2-17.

[19]. Obregon C and Mitri  H (2019)Probabilistic approach for open pit bench slope stability analysis – A mine case study. International Journal of Mining Science and Technology, 29(4):629-640

[20]. Raza I, Ullah H, Ehsan, MI, Khalid P, Iqbal MZ & Rasheed S (2025) An integrated geophysical and geotechnical solutions for assessing slope instability challenges in open-pit mining: safeguarding mining operations. Bulletin of Engineering Geology and the Environment, 84(2), 83.

[21]. Read J and Stacey PF (2009) Guidelines for Open Pit Design. CSIRO Publishing, Melbourne Pp. 280-288

[22]. Reshetnyak SP, Melikhova GS, Yu V and Melikhov MV (2008) Problems of deep open-pits closure in the Kola Peninsula: Proceeding of 10th International Mine Water Association Congress, Technical university of Ostrava, 171–174.

[23]. Sarfaraz H, Khosravi, MH and Pipatpongsa T (2021a) Numerical Stability Analysis of Undercut Slopes Evaluated by Response Surface Methodology. Journal of Mining and Environment, 12(1): 31-43.

[24]. Sarfaraz H, Khosravi MH, Pipatpongsa Tand BakhshandehAmnieh H (2021b) Application of artificial neural network for stability analysis of undercut slopes. International Journal of Mining and Geo-Engineering, 55(1):1-6.

[25]. Shukla SK and Hossain MM (2011) Stability analysis of multi-directional anchored rock slope subjected to surcharge and seismic loads. Soil dynamics andearthquake Engineering journal,  31:841–844

[26]. Swedge (2006) Program for evaluating the geometry and stability of surface   wedges in rock slopes.Rocscience Inc., Toronto, PP 184-192.

[27]. Wyllie DC and Mah CW (2004) Rock slope engineering in civil and mining engineering, 4th edition. Taylor and Francis Group, London, Pp. 45–65

[28]. Youchen L and Sijing C (2011) Rational depth of transferring open-pit into underground mining at Nanfen Iron mine, China. In International conference on E-Business and E-Government (ICEE), China, May6–8, publisher IEEE, 2426–2429.

[29]. Zhang P,Gao, Y, Liu, Y and Yang T (2025) Evaluation of Slope Stability and Landslide Prevention in a Closed Open-Pit Mine Used for Water Storage. Applied Sciences, 15(15), 8659.

[30]. Zyryanov I, Akishev AN and Sherstyuk NM (2021) General concept of determining the parameters of non-mining walls of ultra-deep diamond deposits development open pits.  Gornyi Zhurnal  (Ore and Metals Publishing House) Pp. 48-53.