- Bartoszuk, K. & Kowaluk, G. (2024). Utilization of Fibrous Mat Residues from Upholstered Furniture as Sustainable Fillers in Plywood Production. Materials, 17(16), 4080.
- Tusar, M.A., Zubair, A.A. & Akanda, M.A.S. (2024). Study of Mechanical Properties of Plywood and Its Application in Furniture. In Proceedings of the 14th International Conference on Mechanical Engineering (ICME 2023).
- Bhushan, B. (2017). Introduction to nanotechnology. Springer Handbook of Nanotechnology, pp. 1-19.
- Cheng, H.N., Kilgore, K., Ford, C., Fortier, C., Dowd, M.K. & He, Z. (2019). Cottonseed protein-based wood adhesive reinforced with nanocellulose. Journal of Adhesion Science and Technology, 33(12), 1357-1368.
- Fritz, C. & Olivera, J.F. (2022). Nanocellulose in heterogeneous water-based polymerization for wood adhesives. Polysaccharides, 3(1), 219-235.
- Terzi, E., Kartal, S. N., Yılgör, N., Rautkari, L. & Yoshimura, T. (2016). Role of various nano-particles in prevention of fungal decay, mold growth and termite attack in wood, and their effect on weathering properties and water repellency. International Biodeterioration & Biodegradation, 107, 77-87.
- Sutrisno, Alamsyah, E.M., Syamsudin, T.S., Purwasasmita, B.S., Suzuki, S. & Kobori, H. (2020). The potential using of organic nanoparticles synthesized from Gmelina (Gmelina arborea) wood bark as nanofiller of wood adhesive: Physical, chemical and thermal properties. Journal of the Indian Academy of Wood Science, 17(2), 165-175.
- Taghiyari, H.R. & Farajpour, B.O. (2013). Effect of copper nanoparticles on permeability, physical, and mechanical properties of particleboard. European Journal of Wood and Wood Products, 71(1), 69-77.
- Cheng, L., Ren, S. & Lu, X. (2020). Application of eco-friendly waterborne polyurethane composite coating incorporated with nano cellulose crystalline and silver nano particles on wood antibacterial board. Polymers, 12(2), 407.
- Mashkour, M., Tajvidi, M., Kimura, T., Kimura, F. & Ebrahimi, G. (2011). Fabricating unidirectional magnetic papers using permanent magnets to align magnetic nanoparticle covered natural cellulose fibers. BioResources, 6(4), 4731-4738.
- Hou, Y., Chen, J., Pan, D. & Zhao, L. (2023). Directional-Freezing-Assisted In Situ Sol–Gel Strategy to Synthesize High-Strength, Fire-Resistant, and Hydrophobic Wood-Based Composite Aerogels for Thermal Insulation. Gels, 9(2), 170.
- Wu, C., Shen, Y., Chen, M., Wang, K., Li, Y. & Cheng, Y. (2018). Recent Advances in Magnetic‐Nanomaterial‐Based Mechanotransduction for Cell Fate Regulation. Advanced Materials, 30(17), 1705673.
- Rios, A., & Zougagh, M. (2016). Recent advances in magnetic nanomaterials for improving analytical processes. TrAC Trends in Analytical Chemistry,84(Part A), 72-83.
- Zhang, Y.H., Gu, J.Y., Tan, H.Y., Zhud, L.B. & Di, M.W. (2010). Preparation of the plywood using UF resin modified with blocked isocyanates. Advanced Materials Research, 129, 445-447.
- Alabduljabbar, H., Alyousef, R., Gul, W., Shah, S.R.A., Khan, A., Khan, R. & Alaskar, A. (2020). Effect of alumina nano-particles on physical and mechanical properties of medium density fiberboard. Materials, 13(18), 4207.
- Moslemi, A., Behzad, T. & Pizzi, A. (2020). Addition of cellulose nanofibers extracted from rice straw to urea formaldehyde resin; effect on the adhesive characteristics and medium density fiberboard properties. International Journal of Adhesion and Adhesives, 99, 102582.
- Xu, J., Han, G., Wong, E. D., & Kawai, S. (2003). Development of binderless particleboard from kenaf core using steam-injection pressing. Journal of wood science, 49, 327-332.
- Xu, J., Sugawara, R., Widyorini, R., Han, G. & Kawai, S. (2004). Manufacture and properties of low-density binderless particleboard from kenaf core. Journal of Wood Science, 50, 62-67.
- Bedelean, B. (2018). Application of artificial neural networks and Monte Carlo method for predicting the reliability of RF phytosanitary treatment of wood. European Journal of Wood and Wood Products, 76(4), 1113-1120.
- Schiffmann, R.F. (2020). Microwave and dielectric drying. In Handbook of industrial drying (pp. 345-372). CRC press.
- Pungs, L. & Lamberts, K. (1962). On the economy of hardening thick and light particle board by radio frequency heating. Holz als Roh-und Werkstoff, 20, 49-51.
- Sernek, M., Resnik, J. & Kamke, F. A. (1999). Penetration of liquid urea-formaldehyde adhesive into beech wood. Wood and Fiber Science, 41-48.
- Kamke, F.A. & Lee, J.N. (2007). Adhesive penetration in wood—a review. Wood and Fiber Science, 205-220.
- Johnson, S.E. & Kamke, F.A. (1992). Quantitative analysis of gross adhesive penetration in wood using fluorescence microscopy. The Journal of Adhesion, 40(1), 47-61.
- H., Thole, V. & Faezipour, M. (2021). Experimental study on correlation between adhesive penetration pattern and mechanical performances in oriented strand board. European Journal of Wood and Wood Products, 79(1), 59-74.
- EN 310:1993. Wood-based panels - Determination of modulus of elasticity in bending.
- BS EN 317: 1993. Particleboards and Fiberboards. Determination of Swelling in Thickness after Immersion in Water.
- BS EN 320:2011. Particleboards and fiberboards. Determination of resistance to axial withdrawal of screws.
- ASTM-D3499 - Standard Test Method for Toughness of Wood-Based Structural Panels
- Silva, L.C.L., Lima, F.O., Chahud, E., Christoforo, A.L., Lahr, F.A.R., Favarim, H.R. & de Campos, C.I. (2019). Heat transfer and physical-mechanical properties analysis of particleboard produced with ZnO nanoparticles addition. BioResources, 14(4), 9904-9915.
- Mohammad Farajollah Pour, Hamidreza Edalat, Ali Dorieh, Mohammad Valizadeh Kiamahalleh, Mohammad Hassan Shahavi. (2022). Durability-related performance of reinforced bondline by phenol formaldehyde/nano SiO2 composite in Laminated Veneer Lumber (LVL). Journal of Building Engineering, 60, 2022.
|
