بررسی خواص فنی و میزان انتشار فرمالدهید از پانل‌های تخته ‌خرده چوب دارای گروه عاملی تیوکاربامید

 [1] Heiko Thoemen, H., Mark Irle, M. & Sernek, M. (2010). Wood-Based Panels: An Introduction for Specialists, Brunel University Press, London, England.

[2] Powney, S.  (2025). European wood-based panels production output increased by 1.9% in 2024, according to provisional statistics released by the European Panel Federation (EPF).

[3] Dunky, M. (1998). Urea-formaldehyde (UF) adhesive resins for wood. International Journal of Adhesion and Adhesives, 18(2), 95-107.

[4] Conner, A.H. (2001). Wood: Adhesives, Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd, New York.

[5] Deng, S., Du, G., Li, X. & Pizzi A. (2014). Performance and reaction mechanism of zero formaldehyde-emission urea-glyoxal (UG) resin, Journal of the Taiwan Institute of Chemical Engineers, 45(4), 2029-2038.

[6] Ryu, D.Y., Shimohara, T., Nakabayashi, K., Miyawaki, J., Park, J. & Yoon, S.H. (2019). Urea/nitric acid co-impregnated pitch-based activated carbon fiber for the effective removal of formaldehyde. Journal of Industrial and Engineering Chemistry, 80(3), 98-105.

[7] Nemli, G. & Öztürk, I. (2006). Influences of some factors on the formaldehyde content of particleboard. Building and Environment, 41(6), 770-774.

[8] Ayrilmis, N., Lee, Y. K., Kwon, J.H., Han, T.H. & Kim, H.J. (2016). Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose. Building and Environment, 97(2), 82-87.

[9] IARC. (2012). Chemical agents and related occupations: A review of human carcinogens monographs on the evaluation of the carcinogenic risks to humans, Lyon, France.

[10] Sensogut, C., Murat-Ozalp, M. & Yesil, H. (2009). The effect of borax pentahydrate addition to urea formaldehyde on the mechanical characteristics and free formaldehyde content of plywood. International Journal of Adhesion & Adhesives, 29(5), 589-592.

[11] Costa, N. A., Pereira, J., Ferra, J., Cruz, P., Martins, J., Magalhaes, F.D., Mendes, A. & Carvalho, L. H. (2013). Scavengers for achieving zero formaldehyde emission of wood-based panels. Wood Science and Technology, 47(3), 1261-1272.

[12] Ibrahimnejad, A. (2015). Effect of TiO₂ nanoparticles on the formaldehyde emission, physical and mechanical properties of MDF. Master of Science Thesis, University of Tehran. (In Persian)

[13] Younesi Kordkheili, H., Kazemi Najafi, S. & Behrooz, R. (2016). Influence of nanoclay on physiochemical, thermal and structural properties of urea formaldehyde resin. Journal of Forest and Wood Products, 69(3), 561-570. (In Persian)

[14] Dentinho, I.V. (2017). Formaldehyde-scavenging nanoparticles for high performance resins. Instituto Superior Técnico, 3(1), 1-19.

[15] Ghania, A., Ashaaria, Z., Bawona, P. & Lee, S.H. (2018). Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavenger. Building and Environment, 142(6), 188-194.

[16] Shalbafan, A., Hassannejad, H. & Rahmaninia, M. (2020). Formaldehyde adsorption capacity of chitosan derivatives as bio-adsorbents for wood-based panels. International Journal of Adhesion & Adhesives, 102(11), 102669-102677.

[17] Kord, B., Movahedi, F., Adlnasab, L. & Ayrilmis, A. (2022). Effect of novel scavengers based on phenolic compounds on formaldehyde emission and physical-mechanical properties of particleboard. Wood Material Science & Engineering, 17(6), 954-964.

[18] Eom, Y.G., Kim, J.S., Kim, S., Kim, J.A. & Kim, H.J. (2006). Reduction of formaldehyde emission from particleboards by bio-scavengers. Mokchae Konghak, 34(5), 29-41.

[19] Buyuksari, U., Ayrilmis, N., Avci, E., & and Koc, E. (2010). Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones. Bioresource Technology, 101(1), 255-259.

[20] Migneault, S., Koubaa, A., Riedl, B., Nadji, H., Deng, J. & Zhang, S. (2011). Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins. Holzforschung, 65(3), 403-409.

[21] Ayrilmis, N. & Kaymakci, A. (2012). Reduction of formaldehyde emission from light MDF panels by adding chestnut shell flour. Holzforschung, 66(4), 443-446.

[22] Boran, S., Usta, M., Ondaral, S. & Gümüskaya, E. (2012). The efficiency of tannin as a formaldehyde scavenger chemical in medium density fiberboard. Composites: Part B, 43(5), 2487-2491.

[23] Moubarik, A., Mansouri, H.R., Pizzi, A., Allal, A., Charrier, F., Badia, M.A. & Charrier, B. (2013). Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour–urea formaldehyde adhesive. Composites: Part B, 44(1), 48-51.

[24] Kordkheili, H.Y., Pizzi, A. & Niyatzade, G. (2016). Reduction of formaldehyde emission from particleboard by phenolated kraft lignin. Journal of Adhesive, 92(6), 485-497

[25] Kumar, A., Gupta, A., Sharma, K.V., Nasir, M. & Ahmad khan, T. (2013). Influence of activated charcoalas filler ontheproperties of wood composites, International Journal of Adhesion & Adhesives, 46(1), 34-39.

[26] Taghiyari, H.R., Hosseini, S.B., Ghahri, S., Ghofrani, M. & Papadopoulos, A.N. (2020). Formaldehyde emission in micron-sized wollastonite treated plywood bonded with soy flour and urea-formaldehyde resin. Applied Sciences, 10, 6709-6723.

[27] Shalbafan, A. & Thoemen, H. (2020). Geopolymer-bonded laminated veneer lumber as environmentally friendly and formaldehyde-free product: effect of various additives on geopolymer binder features. Applied Sciences, 10(2), 593-611.

[28] Standard Test Method for Wood-based panels, Determination of formaldehyde release, Part 4: Desiccator method, International Standard, ISO 12460-4, 2016.

[29] Standard Test Method for Particleboards and fibreboards, Determination of swelling in thickness after immersion in water, European Committee for Standardization, EN 317, 1993.

[30] Standard Test Method for Wood Based Panels, Determination of Modulus of Elasticity in Bending and Bending Strength, European Committee for Standardization, EN 310, 1993.

[31] Standard Test Method for Particleboards and Fiberboards, Determination of Tensile Strength Perpendicular to the Plane of the Board, European Committee for Standardization, EN 319, 1993.

[32] Ahamad, T., Kumar V. & Nishat, N. (2006). Synthesis, characterization and antimicrobial activity of transition metal chelated thiourea-formaldehyde resin. Polymer International, 55(12), 398-1406.

[33] Parveen, S., Ahamad, T. & Nishat, N. (2008). New anti-bacterial polychelates: synthesis, characterization, and anti-bacterial activities of thiosemicarbazide–formaldehyde resin and its polymer–metal complexes. Applied Organometallic Chemistry, 22(2), 70-77.

[34] Standard Test Method for Particleboards, Japanese Industrial Standard, JIS A 5908, 2003.

[35] Standard Specifications for Particleboards, European Committee for Standardization, EN 312, 2010.