پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 127 |
| تعداد شمارهها | 7,165 |
| تعداد مقالات | 77,022 |
| تعداد مشاهده مقاله | 155,686,883 |
| تعداد دریافت فایل اصل مقاله | 117,277,926 |
Evaluation of Fluid Loss Control Performance of Local Biopolymer | ||
| Journal of Chemical and Petroleum Engineering | ||
| مقاله 3، دوره 59، شماره 2، اسفند 2025، صفحه 209-223 اصل مقاله (657.41 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jchpe.2025.377675.1524 | ||
| نویسندگان | ||
| Lilian Enyang Ndoma-Egba؛ Anthony Kerunwa؛ Angela Ngozi Nwachukwu؛ George Nduwuba؛ Christain Emelu Okalla؛ Chukwuebuka Francis Dike؛ Boniface Obah* | ||
| Petroleum Engineering Department, School of Engineering and Engineering Technology, Federal University of Technology, Owerri, Nigeria. | ||
| چکیده | ||
| Drilling mud is recognized as the life-wire of drilling operations in the oil and gas industry, and is essential for the exploration and production of subsurface hydrocarbon resources. Drilling mud is plagued by fluid loss, which reduces the volume of the continuous phase while increasing the thickness of the mud cake. This problem has led to the introduction of additives that enhance the mud filter cake features and reduce the filtration rate. Several conventional fluid loss control additives, such as polyanionic cellulose (PAC) and carboxymethyl cellulose (CMC), have been utilized for fluid loss control; however, these additives are expensive and environmentally harmful. These have led to continued research for more suitable local alternatives, which, if successful, could replace these conventional materials. In this study, the performance of locally sourced materials, Afzelia Africana (AA) and Maranta Arundinacea Root (MAR), was compared to that of the conventional material, carboxymethyl cellulose (CMC). Fourier Transform Infrared Spectroscopy (FTIR), rheology, and filtration tests were carried out in this study. From the FTIR results, AA and MA exhibited similar functional groups, including amines, aromatics, carboxylic acids, and alcohols, as indicated by the CMC. From the rheology results, AA exhibited a similar viscosity-increasing attribute observed in CMC, while MAR showed to be a poor viscosifier. According to the filtration loss results, MA recorded a 21 mL fluid volume at 9 g, AA recorded a 66 mL fluid volume at 9 g, while CMC recorded 10 mL at 9 g. MAR demonstrated potential to substitute for CMC as a fluid loss control additive when modified. | ||
| کلیدواژهها | ||
| Afzelia Africana؛ Drilling Fluids؛ Fluid Loss؛ Maranta Arundinacea؛ Water-based Mud | ||
| مراجع | ||
|
[1] Udoh D., Itah J.J., Okon A.N. Formulation of synthetic-based drilling fluid using palm oil-derived ester. Asian J. Microbiol. Biotechnol. Environ. Sci. 14(2), 2012, 175-180.
[2] Kerunwa Evaluation of the Impact of pH on the Rheological Property of Drilling Fluid Formulated with Mucuna Flagellipe and Brachystegia Eurycoma. Petroleum and Coal. Vol 62(4), 2020, 1586-1594.
[3] Anderson R.L., I Ratcliffe C. Greenwell et al. Clay swelling—a challenge in the oilfield. Earth Science Reviews 98(3), 2010, 201-216. https://doi.org/10.1016/j.earscirev.2009.11.003
[4] Odunukwe R.C. Suisility of Detarium Microcarpum as an Additive in Drilling Fluid. 2015 (Accessed 13 March 2018). https://www.researchgate.net/publication/347029029_SUITABILITY_OF_DETARIUM_MICROCARPUM_OIL_AS_AN_EMULSIFIER_IN_NON-AQUEOUS_MUD
[5] Gonzalez J.M, Quintero F., Arellano J.E., Marquez R.L., Sanchez C., Pernia D. Effects of interactions between solids and surfactants on the tribological properties of water-based drilling Colloids and Surfaces A: Physicochem. Engr. Aspects 391(1), 2011, 216-223. https://doi.org/10.1016/j.colsurfa.2011.04.034
[6] Bourgoyne Jr T., Millheim K.K., Chenevert M.E., and Young Jr F.S. Drilling Fluids. In: Applied Drilling Engineering. SPE Vol. 2, 1986, p. 41-84. https://doi.org/10.2118/9781555630010-02
[7] Khodja , Khodja-Saber M., Canselier J.P., Cohaut N., Bergaya F. Drilling Fluid Technology: Performances and Environmental Considerations. Products and Services. From R&D to Final Solutions. Intech Open Access Publishers, 2010, pp. 228-256. https://doi.org/10.5772/10393
[8] Feng Z., Hongming , Yingfeng M., Gao L. and Xijin X. Damage Evaluation for water-based underbalance drilling in low permeability and tight sandstone gas reservoir. J. Petreo. Exp. Develop. 36(1), 2009, 113-119. https://doi.org/10.1016/S1876-3804(09)60114-2
[9] Azar J. and Samuel G.R. Drilling Engineering. PennWell Books-Technology and Engineering, 2007, p 486.
[10] Agwu E. and Akpabio J.U. Using agro-waste materials as possible filter loss control agents in drilling muds. J. Petrol. Sci. Eng. 163, 2018, 185-198. https://doi.org/10.1016/j.petrol.2018.01.009
[11] Bourgoyne T., Millheim K.K., Chenevert M.E., Young F.S. Applied Drilling Engineering, 2. Textbook Series, Society of Petroleum Engineers, Richardson Texas, 2003.
[12] Caenn and Chillinger G.V. Drilling Fluids: State of the Art. J. Petrol. Sci. Eng. Vol 14, 1996, 221-230. https://doi.org/10.1016/0920-4105(95)00051-8
[13] Tugwell, W. Evaluation of Locally Sourced Filter Loss Control Materials for Water Based Drilling Fluid. BEng. Project, University of Uyo, Nigeria, 2018.
[14] Olatunde O. Usman M.A. Olafadehan O.A. Adeosun T.A. Ufot O.E. Improvement of rheological properties of drilling fluid using locally based materials. J. Petroleum Coal 54 (1), 2012, 65–75.
[15] Adebayo A. and Chinonyere P. Sawdust as a filtration control and density additives in water-based drilling mud. Int. J. Sci. Eng. Res. 3(7), 2012, 176-204. https://doi.org/10.1007/s13202-023-01706-2
[16] Egun, L. Abah, A.M. Comparative performance of cassava starch to PAC as fluid loss control agent in water-based drilling mud. Discovery J. 3(9), 2013, 36–39. https://www.discoveryjournals.org/discovery/current_issue/v3/n9/A2.pdf?
[17] Azizi , Ibrahim M.S.N., Hamid K.H.K, Sauki A., Ghazali N.A. and Mohd T.A.T. Agarwood Waste as a New Fluid Loss Control Agent in Water-Based Drilling Fluid. Int. J. Sci. 5(2), 2013), 101-105. https://doi.org/10.12777/ijse.5.2.101-105
[18] Dagde K. and Nmegbu C.G.J. Drilling fluid formulation using cellulose generated from groundnut husk. Int. J. Adv. Res. Tech. 3(6), 2014, 65-71.
[19] Okon N. Udoh F.D. Bassey P.G. Evaluation of rice husk as fluid loss control additive in water-based drilling mud. SPE NAICE Paper, 2014. https://doi.org/10.2118/172379-MS
[20] Nmegbu G.J. Bari-Agara B. Evaluation of corn cob cellulose and its suitability for drilling mud formulation. Int. J. Eng. Res. Afr. 5 (9), 2014, 48–54.
[21] Chinwuba K. Princewill O.N. and Vivian O.C. Evaluation of the fluid loss properties of pleurotus and its commercial availability. Int. J. App. Inno. Eng. Manag. 5(5), 2016, 259-264.
[22] Okon N. Akpabio J.U. and Tugwell K.W. Evaluating the locally sourced materials as fluid loss control additives in water-based drilling fluid. Heliyon 6, 2020, https://doi.org/10.1016/j.heliyon.2020.e04091
[23] Chinwuba K. Uwaezuoke N. Ukaka C.M. Anaefule C.V. and Zakka S.B. Evaluation of rheological and fluid loss properties of Nigerian bentonite using periwinkle and mucuna solanie, Cogent Engineering, 8, 2021, 1885324. http://dx.doi.org/10.1080/23311916.2021.1885324
[24] Ikram Jan B.M, Sidek A. and Kenanakis G. Utilization of Eco-Friendly Waste Generated Nanomaterials in Water-Based Drilling Fluids; State of the Art Review. Materials, 14, 2021, 4171. https://doi.org/10.3390/ma14154171
[25] Kerunwa A, Akoma J., Okoronkwo R.O., Okereke N.U. and Udeagbara S.G. Performance Evaluation of CNF and ZMCs as Fluid Loss Control Additive in Water Based Mud. Petroleum and Coal, 65(2), 2023, 565-580.
[26] Kerunwa A, and Gbaranbiri Evaluation of Local Viscosifiers as an Alternative to Conventional Pac-R. Advances in Petroleum Exploration and Development, 15(1), 2018, 1-8.
[27] Hassiba KJ, and Am-Qwani The Effect of Salinity on the Rheological Properties of Water Based Mud under High Pressures and High Temperatures for Drilling Offshore and Deep Wells. Earth Science Research, 2(1), 2013, 175-186. https://doi.org/10.5539/esr.v2n1p175
[28] Muherei Common Versus Herschel-Bulkley Drilling Fluid Models: Effect of their Rheological Parameters on Dynamic Particle Settling Velocity. American Scientific Research Journal for Engineering, Technology, and Sciences. Vol. 16(1), 2016, 155-177. https://asrjetsjournal.org/American_Scientific_Journal/article/view/1377
[29] Eiroboyi I, Ikiensikimama SS, Oriji BA, Okoye IP. The Effect of Monovalent and Divalent Ions on Biodegradable Polymers in Enhanced Oil InSPE Nigeria Annual International Conference and Exhibition 2019 Aug 5 (p. D033S027R002). SPE. doi.org/10.2118/198788-MS
[30] Dike CF, Izuwa NC, Kerunwa A, Nwanwe O, Enyioko ND, Obah B. An Investigation on the Enhanced Oil Recovery Performance of Local Journal of Chemical and Petroleum Engineering (JChPE), 2024 58(2): 311-324. https://doi.org/10.22059/jchpe.2024.372867.1486
[31] Gamal H, Elkatatny S, Basfar S, and Al-Majed Effect of pH on Rheological and Filtration Properties of Water-Based Drilling Fluid Based on Bentonite. Sustainability. (11), 2019, 1-13. https://doi.org/10.3390/su11236714
[32] Agwu OE, Akpabio JU, and Archibong Rice husk and saw dust as filter loss control agent for water-based mud. Heliyon Journal, 5(7), 2019, 1-8. https://doi.org/10.1016/j.heliyon.2019.e02059 | ||
|
آمار تعداد مشاهده مقاله: 320 تعداد دریافت فایل اصل مقاله: 372 |
||
سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب