بررسی امکان استفاده از پین کامپوزیتی الیاف شیشه (GFRP) در ساخت قاب فارسی مبلمان تحت بار کشش قطری

[1] Malkocoglu, A., Yerlikaya, N.Ç. & Cakiroglu, F.L. (2013). Effects of number and distance between dowels of ready-to-assemble furniture on bending moment resistance of corner joints. Wood Research, 58(4), 671-680.

[2] Demirci, S., Diler, H., Kasal, A., & ERDİL, Y. (2020). Bending moment resistances of L-shaped furniture frame joints under tension and compression loadings. Wood Research, 65(6), 248-261.

[3] Kazemi Najafi, S., Maleki, S., Ebrahimi, G., & Ghofrani, M. (2017). Determination of withdrawal resistance of staple joints constructed with various members of upholstered furniture. Iranian Journal of Wood and Paper Industries, 8(1), 95-108.

[4] Rostampour Haftkhani, A., Hajializadeh, F., & Arabi, M. (2022). The effect of spline material, adhesive type, and screw on bending moment capacity of the mitered frame corner joints made of medium-density fiberboard (MDF) under diagonal tension. Forest and Wood Products, 75(2), 169-184.

[5] Uysal, M., & Haviarova, E. (2021). Evaluating design of mortise and tenon furniture joints under bending loads by lower tolerance limits. Wood and Fiber Science, 53(2), 78-86.

[6] Chen, M., & Lyu, J. (2018). Properties of double dowel joints constructed of Medium Density Fiberboard. Maderas. Ciencia y tecnología, 20(3), 369-380.

[7] Georgescu, S., Varodi, A. M., Racasan, S., and Bedelean, B. (2019). Effect of the dowel length, dowel diameter, and adhesive consumption on bending moment capacity of heat-treated wood dowel joints. Bio Resource, 14(3), 6619-6632.

[8] Ghofrani, M., & Nori, H. (2009). Lateral holding strength of wooden dowel, screw and ready-to-assemble joints (RTA joints) constructed of Medium Density Fiberboard (MDF). Iranian Journal of Wood and Paper Science Research, 24(2), 219-231.

[9] Han, L., Kutnar, A., Sandak, J., Šušteršič, I., & Sandberg, D. (2023). Adhesive-and metal-free assembly techniques for prefabricated multi-layer engineered wood products: A review on wooden connectors. Forests, 14(2), 311-319.

[10] Salari, A., Faezipour, M., Karimi, A., Jonoobi, M., & Moradpour, P. (2018). Investigation of the effect of modified poly vinyl acetate on the stress carrying capacity of corner joints in the wood members joined with dowel. Iranian Journal of Wood and Paper Industries, 9(3), 323-336.

[11] Rostampour-Haftkhani, A., Sharari, M., Arabi, M., & Hajializadeh, F. (2022). Improvement of the bending moment capacity of mitered MDF frame under diagonal tension by using of the densified poplar dowel. Iranian Journal of Wood and Paper Industries, 12(4), 561-573.

[12] Schober, K.U., Harte, A.M., Kliger, R., Jockwer, R., Xu, Q., & Chen, J. F. (2015). FRP reinforcement of timber structures. Construction and Building Materials, 97(4), 106-118.

[13] Kasal, B., & Yan, L. (2021). Fiber-reinforced polymers as reinforcement for timber structural elements. In Reinforcement of Timber Elements in Existing Structures: State-of-the-Art Report of the RILEM TC 245-RTE pp. 51-78. Cham: Springer International Publishing.

[14] Kılınçarslan, Ş., & Türker, Y.Ş. (2022). Strengthening of solid beam with fiber reinforced polymers. Turkish Journal of Engineering, 7(3), 166-171.

[15] Jian, B., Cheng, K., Li, H., Ashraf, M., Zheng, X., Dauletbek, A., ... & Zhou, K. (2022). A review on strengthening of timber beams using fiber reinforced polymers. Journal of Renewable Materials, 10(8), 2073-2098.

 [16] Yerlikaya, N.C. (2013). Failure load of corner joints, which are reinforced with glass-fiber fabric in case-type furniture. Scientific Research and Essays, 8(8), 325-339.

[17] Nurdan, C.Y. (2013). Failure load of corner joints, which are reinforced with glass-fiber fabric in case-type furniture. Scientific Research and Essays, 8(8), 325-339.

[18] Yıldırım, M. N., Tor, Ö., & Karaman, A. (2018). The bending moment resistance of corner joints reinforced with glass fiber polymer. Kastamonu University Journal of Forestry Faculty, 18(3): 350-356.

[19] Zor, M., & Kartal, M. E. (2020). Finite element modeling of fiber reinforced polymer-based wood composites used in furniture construction considering semi-rigid connections. Drvna Industrija, 71(4), 339-345.

[20] Karaman, A., & Yıldırım, M. N. (2021). Effects of wood species of the dowels and fiber woven fabric types on bending moment resistance of l-shaped joints. Wood Industry and Engineering, 3(2), 12-22.

[21] Dalvand, M., Ebrahimi, G., & Pourtahmasi, K. (2022). Reinforcement of joints between LVL members with GFRP and finite element analysis. Drvna industrija, 73(1), 47-57.

[22] Toumpanaki, E., & Ramage, M. (2019). Bond performance of glued-in CFRP and GFRP rods in timber. In International Network on Timber Engineering Research: Meeting, 51, 177-194. Timber Scientific Publishing.

[23] He, Z. W., Chen, C. Q., Shan, B., & Xiao, Y. (2021). Pull-out behavior of CFRP bars in glued-in glubam joints. Journal of Composites for Construction, 25(4), 04021036.

[24] Zhang, H., Li, H., Dauletbek, A., Lorenzo, R., Corbi, I., & Corbi, O. (2023). Research status of glued-in rods connections in wood structures. Journal of Building Engineering, 65(1), 105782.

[25] Saribiyik, M., & Akgül, T. (2010). GFRP bar element to strengthen timber connection systems. Scientific Research and Essays, 5(13), 1713-1719.

[26] De Almeida, A.C., & de Melo Moura, J.D. (2022). Mechanical behavior of GFRP dowel connections to cross laminated timber-CLT panels. Forests, 13(2), 320-328.

[27] Vodiannikov, M.A., & Kashevarova, G.G. (2017). Analysis of wood structure connections using cylindrical steel and carbon fiber dowel pins. In IOP conference series: Materials Science and Engineering, 25(1), 12031.