Numerical Simulation of the Flow in a Concentric Double-Pipe Heat Exchanger with a Square Inner Pipe and a Circular Outer Pipe

[1]           Ding, Y., Alias, H., Wen, D., & Williams, R. A. (2006). Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids). International Journal of Heat and Mass Transfer, 49(1-2), 240-250.https://doi.org/10.1016/j.ijheatmasstransfer.2005.07.009

[2]           Vajjha, R. S., & Das, D. K. (2009). Experimental determination of thermal conductivity of three nanofluids and development of new correlations. International journal of heat and mass transfer, 52(21-22), 4675-4682. https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.027

[3]           Fotukian, S. M., & Esfahany, M. N. (2010). Experimental study of turbulent convective heat transfer and pressure drop of dilute CuO/water nanofluid inside a circular tube. International communications in heat and mass transfer, 37(2), 214-219. https://doi.org/10.1016/j.icheatmasstransfer.2009.10.003

[4]           Zhang, L., Guo, H., Wu, J., & Du, W. (2012). Compound heat transfer enhancement for shell side of double-pipe heat exchanger by helical fins and vortex generators. Heat and Mass Transfer, 48, 1113-1124. https://doi.org/10.1007/s00231-011-0959-5

[5]           Sheikholeslami, M., Ganji, D. D., & Gorji-Bandpy, M. (2016). Experimental and numerical analysis for effects of using conical ring on turbulent flow and heat transfer in a double pipe air to water heat exchanger. Applied Thermal Engineering, 100, 805-819.https://doi.org/10.1016/j.applthermaleng.2016.02.075

[6]           Han, D., He, W. F., & Asif, F. Z. (2017). Experimental study of heat transfer enhancement using nanofluid in double tube heat exchanger. Energy Procedia, 142, 2547-2553. https://doi.org/10.1016/j.egypro.2017.12.090

[7]           Qi, C., Luo, T., Liu, M., Fan, F., & Yan, Y. (2019). Experimental study on the flow and heat transfer characteristics of nanofluids in double-tube heat exchangers based on thermal efficiency assessment. Energy Conversion and Management, 197, 111877. https://doi.org/10.1016/j.enconman.2019.111877

[8]           Karimi, A., Al-Rashed, A. A., Afrand, M., Mahian, O., Wongwises, S., & Shahsavar, A. (2019). The effects of tape insert material on the flow and heat transfer in a nanofluid-based double tube heat exchanger: two-phase mixture model. International Journal of Mechanical Sciences, 156, 397-409. https://doi.org/10.1016/j.ijmecsci.2019.04.009

[9]           Gnanavel, C., Saravanan, R., & Chandrasekaran, M. (2020). Heat transfer enhancement through nano-fluids and twisted tape insert with rectangular cut on its rib in a double pipe heat exchanger. Materials Today: Proceedings, 21, 865-869. https://doi.org/10.1016/j.matpr.2019.07.606

[10]         Sinaga, N., Nisar, K. S., & Kaood, A. (2021). Second law efficiency analysis of air injection into inner tube of double tube heat exchanger. Alexandria Engineering Journal, 60(1), 1465-1476. https://doi.org/10.1016/j.aej.2020.10.064

[11]         El Maakoul, A., El Metoui, M., Abdellah, A. B., Saadeddine, S., & Meziane, M. (2017). Numerical investigation of thermohydraulic performance of air to water double-pipe heat exchanger with helical fins. Applied Thermal Engineering, 127, 127-139. https://doi.org/10.1016/j.enconman.2020.112710

[12]         El Maakoul, A., Feddi, K., Saadeddine, S., Abdellah, A. B., & El Metoui, M. (2020). Performance enhancement of finned annulus using surface interruptions in double-pipe heat exchangers. Energy conversion and management, 210, 112710. https://doi.org/10.1016/j.applthermaleng.2017.08.024

[13]         El Maakoul, A., Laknizi, A., Saadeddine, S., Abdellah, A. B., Meziane, M., & El Metoui, M. (2017). Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger. Energy conversion and management, 133, 76-86.https://doi.org/10.1016/j.enconman.2016.12.002

[14]         Majidi, D., Alighardashi, H., & Farhadi, F. (2018). Experimental studies of heat transfer of air in a double-pipe helical heat exchanger. Applied Thermal Engineering, 133, 276-282. https://doi.org/10.1016/j.applthermaleng.2018.01.057

[15]         Asadi, A., Zaboli, M., Mogharrebi, A. R., Saedodin, S., & Ganji, D. D. (2022). Numerical analysis of turbulence-inducing elements with various geometries and utilization of hybrid nanoparticles in a double pipe heat exchanger. Alexandria Engineering Journal, 61(5), 3633-3644. https://doi.org/10.1016/j.aej.2021.08.074

[16]         Sharifi, K., Sabeti, M., Rafiei, M., Mohammadi, A. H., & Shirazi, L. (2018). Computational fluid dynamics (CFD) technique to study the effects of helical wire inserts on heat transfer and pressure drop in a double pipe heat exchanger. Applied Thermal Engineering, 128, 898-910. https://doi.org/10.1016/j.applthermaleng.2017.08.146

[17]         Alhusseny, A., Turan, A., & Nasser, A. (2017). Rotating metal foam structures for performance enhancement of double-pipe heat exchangers. International Journal of Heat and Mass Transfer, 105, 124-139. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.055

[18]         Andrzejczyk, R., Muszynski, T., & Kozak, P. (2019). Experimental investigation of heat transfer enhancement in straight and U-bend double-pipe heat exchanger with wire insert. Chemical Engineering and Processing-Process Intensification, 136, 177-190. https://doi.org/10.1016/j.cep.2019.01.003

[19]         Arjmandi, H., Amiri, P., & Pour, M. S. (2020). Geometric optimization of a double pipe heat exchanger with combined vortex generator and twisted tape: A CFD and response surface methodology (RSM) study. Thermal Science and Engineering Progress, 18, 100514.https://doi.org/10.1016/j.tsep.2020.100514

[20]         Córcoles, J. I., Moya-Rico, J. D., Molina, A. E., & Almendros-Ibáñez, J. A. (2020). Numerical and experimental study of the heat transfer process in a double pipe heat exchanger with inner corrugated tubes. International Journal of Thermal Sciences, 158, 106526. https://doi.org/10.1016/j.ijthermalsci.2020.106526

[21]         Kola, P. V. K. V., Pisipaty, S. K., Mendu, S. S., & Ghosh, R. (2021). Optimization of performance parameters of a double pipe heat exchanger with cut twisted tapes using CFD and RSM. Chemical Engineering and Processing-Process Intensification, 163, 108362. https://doi.org/10.1016/j.cep.2021.108362

[22]         Nakhchi, M. E., & Esfahani, J. A. (2020). CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert. Powder technology, 367, 877-888. https://doi.org/10.1016/j.powtec.2020.04.043

[23]         Lokhande, A. A., Waghole, D. R., & Dayane, S. A. (2023). Heat transfer augmentation in shell and tube heat exchangers using copper oxide nanofluid with modified geometry: A numerical investigation. Materials Today: Proceedings, 72, 1240-1245.https://doi.org/10.1016/j.matpr.2022.09.290

[24]         Rahman, M., Islam, M. S., & Khan, A. H. (2023). Numerical investigation and benchmarking of heat transfer and pressure loss characteristics with two-sided rib-roughened and two-sided heat supply in narrow rectangular channels. Thermal Science and Engineering Progress, 41, 101812. https://doi.org/10.1016/j.tsep.2023.101812

[25]         Ghazanfari, V., Imani, M., Shadman, M. M., Amini, Y., & Zahakifar, F. (2023). Numerical study on the thermal performance of the shell and tube heat exchanger using twisted tubes and Al2O3 nanoparticles. Progress in nuclear energy, 155, 104526. https://doi.org/10.1016/j.pnucene.2022.104526

[26]         Tusar, M. H., Bhowmik, P. K., Salam, B., Ahamed, J. U., & Kim, J. K. (2021). Convective heat transfer and friction factor characteristics of helical strip inserted annuli at turbulent flow. International Journal of Heat and Mass Transfer, 176, 121422. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121422

[27]         Hangi, M., Rahbari, A., & Lipiński, W. (2021). Design improvement of compact double-pipe heat exchangers equipped with tube-side helical insert and annulus-side helical strip: Hydrothermal and exergy analyses. Applied Thermal Engineering, 190, 116805. https://doi.org/10.1016/j.applthermaleng.2021.116805

[28]         Chaurasia, S. R., & Sarviya, R. M. (2020). Thermal performance analysis of CuO/water nanofluid flow in a pipe with single and double strip helical screw tape. Applied Thermal Engineering, 166, 114631. https://doi.org/10.1016/j.applthermaleng.2019.114631

[29]         White, F. M., & Majdalani, J. (2006). Viscous fluid flow (Vol. 3, pp. 433-434). New York: McGraw-Hill.

[30]         Bizhani, M., & Kuru, E. (2015, May). Modeling Turbulent Flow of Non-Newtonian Fluids Using Generalized Newtonian Models. In International Conference on Offshore Mechanics and Arctic Engineering (Vol. 56482, p. V002T08A001). American Society of Mechanical Engineers. https://doi.org/10.1115/OMAE2015-41427

[31]         Esfahanian, V., Rahbari, I., & Mortazavi, M. H. (2015). Uncertainty quantification of RANS turbulence models for power-law non-newtonian fluid flows. Modares Mechanical Engineering, 15(5), 287-294. 20.1001.1.10275940.1394.15.5.54.8

[32]         Song, K., He, Y., Zhang, Q., Wu, X., He, A., & Hou, Q. (2024). Thermal performance promotion of a novel double-tube heat exchanger by helical fin with perforations. International Communications in Heat and Mass Transfer, 150, 107189. https://doi.org/10.1016/j.icheatmasstransfer.2023.107189

[33]         Yang, C., Li, W., & Nakayama, A. (2013). Convective heat transfer of nanofluids in a concentric annulus. International Journal of Thermal Sciences, 71, 249-257.https://doi.org/10.1016/j.ijthermalsci.2013.04.007

[34]         Bhadouriya, R., Agrawal, A., & Prabhu, S. V. (2015). Experimental and numerical study of fluid flow and heat transfer in an annulus of inner twisted square duct and outer circular pipe. International Journal of Thermal Sciences, 94, 96-109. https://doi.org/10.1016/j.ijthermalsci.2015.02.019