تعداد نشریات | 161 |
تعداد شمارهها | 6,532 |
تعداد مقالات | 70,504 |
تعداد مشاهده مقاله | 124,124,245 |
تعداد دریافت فایل اصل مقاله | 97,232,633 |
An experimental study about the effects of the partially drained strain paths on the monotonic behavior of loose silty sands using triaxial tests | ||
International Journal of Mining and Geo-Engineering | ||
مقاله 1، دوره 58، شماره 3، آذر 2024، صفحه 243-249 اصل مقاله (1.6 M) | ||
نوع مقاله: Research Paper | ||
شناسه دیجیتال (DOI): 10.22059/ijmge.2024.357032.595047 | ||
نویسندگان | ||
Jafar Mohammadi1؛ Siamak Zadkarim* 2؛ Masoud Pourbaba1 | ||
1Department of Civil Engineering, Maragheh Branch, Islamic Azad University, Maragheh, Iran. | ||
2Department of Civil Engineering, Bonab Branch, Islamic Azad University, Bonab, Iran. | ||
چکیده | ||
The mechanical behavior of silty sands is one of the crucial topics in the field of soil mechanics. However, many studies have been conducted to determine the main features of the silty sand mixtures; there are some non-clarified mechanisms yet. Most of the previously applied studies have been focused on the behavior of silty sands under conventional paths such as consolidated drained and consolidated undrained stress-strain paths. Recently done investigations have shown the assumption that the mentioned conventional paths are not the critical ones for all situations. Therefore, considering partially drained paths not only can help to understand the mechanical behavior of silty sands better but also is necessary to ensure the safety of the projects. In this paper, 14 triaxial shear tests are applied to assess the effects of the partially drained paths on the main features of the shearing mechanism of silty sands. As the water inlet is the most critical path between the partially drained tests, this research is done by considering only this type of partial drainage and ignoring other non-crucial partially drained strain paths. Achieved results indicate that partial drainage can affect the behavior of samples with a little fine content (up to 5%) significantly, while for samples with more fine content, these effects are not considerable. In other words, samples, which not exhibit a fully static liquefaction (completely softening behavior), will be considerably affected by partial drainage. Effects of water inlet during shearing on the asymptotic stress ratios, excess pore water generation, and experienced stress paths are investigated, as well. | ||
کلیدواژهها | ||
Partially drainage؛ Silty sand؛ Water inlet؛ Strain path؛ asymptotic stress ratio | ||
مراجع | ||
[1] Alipour, R., Aminpour, H., & Dehghanzadeh, A. (2023). Investigating the effect of soil improvement by micropile method in marl soil: a case study of Bidboland, Khuzestan. Amirkabir Journal of Civil Engineering, 54(12), 4573-4588.
[2] Alidadi, S., Alipour, R., & Shakeri, M. (2022). Influence of rockfill particle breakage on long-term settlement of embankment dams. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 1-11.
[3] Haeri, S. M., & Nikoonejad, K. (2023). Liquefaction Behavior of a Well-Graded Gravelly Soil under Initial Static Shear Stress in Cyclic Triaxial and Simple Shear Conditions. International Journal of Geomechanics, 23(6), 04023053.
[4] Alipour, R., Heshmati R, A. A., Karimiazar, J., Esazadefar, N., Asghari-Kaljahi, E., & Bahmani, S. H. (2022). Resistance and swelling of Tabriz marl soils stabilised using nano-silica and nano-alumina. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 1-14.
[5] Ishihara, K., Tatsuoka, F., & Yasuda, S. (1975). UNDRAINED DEFORMATION AND LIQUEFACTION OF SAND UNDER CYCLIC STRESSES. Soils and Foundations, 15(1). https://doi.org/10.3208/sandf1972.15.29
[6] Baziar, M. H., & Dobry, R. (1995). Residual strength and large-deformation potential of loose silty sands. Journal of Geotechnical Engineering, 121(12). https://doi.org/10.1061/(ASCE)0733-9410(1995)121:12(896)
[7] Alarcon-Guzman, A., Leonards, G. A., & Chameau, J. L. (1988). Undrained monotonic and cyclic strength of sands. Journal of Geotechnical Engineering, 114(10). https://doi.org/10.1061/(ASCE)0733-9410(1988)114:10(1089)
[8] Law, K. T., & Ling, Y. H. (1992). Liquefaction of granular soils with non-cohesive and cohesive fines. In 10Th World Conference on Earthquake Engineering.
[9] Lade, P. v., & Yamamuro, J. A. (1997). Effects of nonplastic fines on static liquefaction of sands. Canadian Geotechnical Journal, 34(6). https://doi.org/10.1139/t97-052
[10] Onyelowe, K. C., Ebid, A. M., Hanandeh, S., Moghal, A. A. B., Onuoha, I. C., Obianyo, I. I., ... & Ubachukwu, O. A. (2023). The influence of fines on the hydro-mechanical behavior of sand for sustainable compacted liner and sub-base construction applications. Asian Journal of Civil Engineering, 1-13.
[11] Pitman, T. D., Robertson, P. K., & Sego, D. C. (1994). Influence of fines on the collapse of loose sands. Canadian Geotechnical Journal, 31(5). https://doi.org/10.1139/t94-084
[12] Thevanayagam, S., Fiorillo, M., & Liang, J. (2000). Effect of non-plastic fines on undrained cyclic strength of silty sands. Proceedings of Sessions of Geo-Denver 2000 - Soil Dynamics and Liquefaction 2000, GSP 107, 295. https://doi.org/10.1061/40520(295)6
[13] Polito, C. P., & Martin II, J. R. (2001). Effects of Nonplastic Fines on the Liquefaction Resistance of Sands. Journal of Geotechnical and Geoenvironmental Engineering, 127(5). https://doi.org/10.1061/(asce)1090-0241(2001)127:5(408)
[14] Tabrizi, E. M., Tohidvand, H. R., Hajialilue-Bonab, M., Mousavi, E., & Ghassemi, S. (2023). An investigation on the strain accumulation of the lightly EICP-cemented sands under cyclic traffic loads. Journal of Road Engineering.
[15] Amini, F., & Qi, G. Z. (2000). Liquefaction Testing of Stratified Silty Sands. Journal of Geotechnical and Geoenvironmental Engineering, 126(3). https://doi.org/10.1061/(asce)1090-0241(2000)126:3(208)
[16] Karim, M. E., & Alam, M. J. (2017). Effect of nonplastic silt content on undrained shear strength of sand–silt mixtures. International Journal of Geo-Engineering, 8(1). https://doi.org/10.1186/s40703-017-0051-1
[17] Monkul, M. M., & Yamamuro, J. A. (2011). Influence of silt size and content on liquefaction behavior of sands. Canadian Geotechnical Journal, 48(6). https://doi.org/10.1139/t11-001
[18] Baki, M. A. L., Rahman, M. M., Lo, S. R., & Gnanendran, C. T. (2012). Linkage between static and cyclic liquefaction of loose sand with a range of fines contents. Canadian Geotechnical Journal, 49(8). https://doi.org/10.1139/T2012-045
[19] Rahman, Md. M., & Lo, S. R. (2014). Undrained Behavior of Sand-Fines Mixtures and Their State Parameter. Journal of Geotechnical and Geoenvironmental Engineering, 140(7). https://doi.org/10.1061/(asce)gt.1943-5606.0001115
[20] Papadopoulou, A., & Tika, T. (2008). The effect of fines on critical state and liquefaction resistance characteristics of non-plastic silty sands. Soils and Foundations, 48(5). https://doi.org/10.3208/sandf.48.713
[21] Yamamuro, J. A., & Covert, K. M. (2001). Monotonic and Cyclic Liquefaction of Very Loose Sands with High Silt Content. Journal of Geotechnical and Geoenvironmental Engineering, 127(4). https://doi.org/10.1061/(asce)1090-0241(2001)127:4(314)
[22] Xenaki, V. C., & Athanasopoulos, G. A. (2003). Liquefaction resistance of sand-silt mixtures: An experimental investigation of the effect of fines. Soil Dynamics and Earthquake Engineering, 23(3). https://doi.org/10.1016/S0267-7261(02)00210-5
[23] Ranga Swamy, K., Akhila, M., & Sankar, N. (2021). Effects of fines content and plasticity on liquefaction resistance of sands. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 174(6). https://doi.org/10.1680/jgeen.19.00270
[24] Porcino, D., & Diano, V. (2016). Laboratory Study on Pore Pressure Generation and Liquefaction of Low-Plasticity Silty Sandy Soils during the 2012 Earthquake in Italy. Journal of Geotechnical and Geoenvironmental Engineering, 142(10). https://doi.org/10.1061/(asce)gt.1943-5606.0001518
[25] Lashkari, A., Falsafizadeh, S. R., & Rahman, M. M. (2021). Influence of linear coupling between volumetric and shear strains on instability and post-peak softening of sand in direct simple shear tests. Acta Geotechnica, 16(11), 3467-3488.
[26] Cherif Taiba, A., Belkhatir, M., Kadri, A., Mahmoudi, Y., & Schanz, T. (2016). Insight into the Effect of Granulometric Characteristics on the Static Liquefaction Susceptibility of Silty Sand Soils. Geotechnical and Geological Engineering, 34(1). https://doi.org/10.1007/s10706-015-9951-z
[27] Tohidvand, H. R., Hajialilue-Bonab, M., Katebi, H., Nikvand, V., & Ebrahimi-Asl, M. (2022). Monotonic and post cyclic behavior of sands under different strain paths in direct simple shear tests. Engineering Geology, 302. https://doi.org/10.1016/j.enggeo.2022.106639
[28] Tohidvand, H. R., Maleki Tabrizi, E., Esmatkhah Irani, A., Hajialilue-Bonab, M., & Farrin, M. (2023). Effects of the Fiber Reinforcement on the Monotonic Behavior of Sands Considering Coupled Volumetric–Shear Strain Paths. International Journal of Geosynthetics and Ground Engineering, 9(4), 39.
[29] Chen, W. B., Liu, K., Feng, W. Q., & Yin, J. H. (2020). Partially drained cyclic behaviour of granular fill material in triaxial condition. Soil Dynamics and Earthquake Engineering, 139. https://doi.org/10.1016/j.soildyn.2020.106355
[30] Suzuki, Y., Carotenuto, P., Dyvik, R., & Jostad, H. P. (2020). Experimental study of modeling partially drained dense sand behavior in monotonic triaxial compression loading tests. Geotechnical Testing Journal, 43(5). https://doi.org/10.1520/GTJ20190097
[31] Yao, C. R., Wang, B., Liu, Z. Q., Fan, H., Sun, F. H., & Chang, X. H. (2019). Evaluation of liquefaction potential in saturated sand under different drainage boundary conditions-An energy approach. Journal of Marine Science and Engineering, 7(11). https://doi.org/10.3390/jmse7110411
[32] Yamamoto, Y., Hyodo, M., & Orense, R. P. (2009). Liquefaction Resistance of Sandy Soils under Partially Drained Condition. Journal of Geotechnical and Geoenvironmental Engineering, 135(8). https://doi.org/10.1061/(asce)gt.1943-5606.0000051
[33] Umehara, Y., Zen, K., & Hamada, K. (1985). EVALUATION OF SOIL LIQUEFACTION POTENTIALS IN PARTIALLY DRAINED CONDITIONS. Soils and Foundations, 25(2). https://doi.org/10.3208/sandf1972.25.2_57
[34] Vaid, Y. P., & Eliadorani, A. (1998). Instability and liquefaction of granular soils under undrained and partially drained states. Canadian Geotechnical Journal, 35(6). https://doi.org/10.1139/t98-061
[35] Gananathan, N. (2002). Partially drained response of sands. Diss. University of British Columbia.
[36] Logeswaran, P. (2005), Behaviour of sands under simultaneous changes in volume and pore pressure. Diss. Carleton University.
[37] Wu, Q. X., Xu, T. T., & Yang, Z. X. (2020). Diffuse instability of granular material under various drainage conditions: discrete element simulation and constitutive modeling. Acta Geotechnica, 15(7). https://doi.org/10.1007/s11440-019-00885-9
[38] Chaneva, J., Kluger, M. O., Moon, V. G., Lowe, D. J., & Orense, R. P. (2023). Monotonic and cyclic undrained behaviour and liquefaction resistance of pumiceous, non-plastic sandy silt. Soil Dynamics and Earthquake Engineering, 168, 107825.
[39] Adamidis, O., & Madabhushi, S. P. G. (2018). Experimental investigation of drainage during earthquake-induced liquefaction. Geotechnique, 68(8). https://doi.org/10.1680/jgeot.16.P.090
[40] Kamai, R., (2011). Liquefaction-induced shear strain localization processes in layered soil profiles. University of California, Davis.
[41] Onyelowe, K. C., Mojtahedi, F. F., Ebid, A. M., Rezaei, A., Osinubi, K. J., Eberemu, A. O., ... & Rehman, Z. U. (2023). Selected AI optimization techniques and applications in geotechnical engineering. Cogent Engineering, 10(1), 2153419.
[42] Onyelowe, K. C., Ebid, A. M., Sujatha, E. R., Fazel-Mojtahedi, F., Golaghaei-Darzi, A., Kontoni, D. P. N., & Nooralddin-Othman, N. (2023). Extensive overview of soil constitutive relations and applications for geotechnical engineering problems. Heliyon.
[43] Ebid, A. M. (2021). 35 Years of (AI) in geotechnical engineering: state of the art. Geotechnical and Geological Engineering, 39(2), 637-690. | ||
آمار تعداد مشاهده مقاله: 220 تعداد دریافت فایل اصل مقاله: 164 |