تعداد نشریات | 161 |
تعداد شمارهها | 6,532 |
تعداد مقالات | 70,504 |
تعداد مشاهده مقاله | 124,123,290 |
تعداد دریافت فایل اصل مقاله | 97,231,265 |
Polystyrene and Polymethylmethacrylate Microplastics Embedded in Fat, Oil, and Grease (FOG) Deposits of Sewers | ||
Pollution | ||
دوره 8، شماره 4، مهر 2022، صفحه 1338-1347 اصل مقاله (738.04 K) | ||
نوع مقاله: Original Research Paper | ||
شناسه دیجیتال (DOI): 10.22059/poll.2022.342517.1464 | ||
نویسنده | ||
Mitra Nikpay* | ||
Faculty of Civil Engineering, Dresden University of Applied Sciences, 01069, Dresden, Germany | ||
چکیده | ||
Fat, oil, and grease (FOG) deposits in the urban sewer system affect the optimal performance of the wastewater collection system and treatment plant, while increasing sewer maintenance costs. The interaction of microplastics (MPs) and FOG in the sewer system could drastically change the quality of deposited materials and the fate of MPs in raw sewage. In this study, the batch experiment was conducted to explain the mechanism of FOG formation by synthetic wastewater and its interaction with polystyrene (PS) and polymethyl methacrylate (PMMA) particles. We found three different segments for FOG deposits in the batch, namely static and buoyant micro-deposits, gel-like, and solid deposits. The average size of micro-deposits adhered to the solid-liquid interface of the container was 25 µm and buoyant deposits with a small size of 3 µm adsorbed onto the MPs at the liquid-air interface. The gel-like formation promoted a virtual liquid phase where PS and PMMA were confined and segregated. Some PMMA particles were entrapped in the self-assembly of biopolymers that formed between the PS particles. This research indicates that FOG deposition in the urban sewers contains high numbers of MPs, such that any plan involving a reuse or disposal program requires a risk assessment. | ||
کلیدواژهها | ||
Segregation؛ Biopolymer؛ Polystyrene؛ PMMA؛ Surfactant | ||
مراجع | ||
Abreu, C.R., Tavares, F.W. and Castier, M. (2003). Influence of particle shape on the packing and on the segregation of spherocylinders via Monte Carlo simulations. Powder Technology, 134(1-2), https://dx.doi.org/10.1016/S0032-5910(03)00151-7 Adib, D., Mafigholami, R. and Tabeshkia, H. (2021). Identification of microplastics in conventional drinking water treatment plants in Tehran, Iran. Journal of Environmental Health Science and Engineering, 19(2), https://doi.org/10.1007/s40201-021-00737-3 Ainali, N.M., Kalaronis, D., Evgenidou, E., Kyzas, G.Z., Bobori, D., Kaloyianni, M., Yang, X., Bikiaris, D.N. and Lambropoulou, D.A. (2022). Do poly (lactic acid) microplastics instigate a threat? A perception for their dynamic towards environmental pollution and toxicity. Science of the Total Environment, https://doi.org/10.1016/j.scitotenv.2022.155014 Alavian Petroody, S.S., Hashemi, S.H. and Van Gestel, C.A., (2021). No seasonal differences in the emission of microplastics from an urban wastewater treatment plant on the Southern Coast of the Caspian Sea, Pollution, 7(2), https://doi.org/10.22059/poll.2021.317403.996 Azizi, N., Nasseri, S., Nodehi, R.N., Jaafarzadeh, N. and Pirsaheb, M. (2022). Evaluation of conventional wastewater treatment plants efficiency to remove microplastics in terms of abundance, size, shape, and type: A systematic review and Meta-analysis. Marine Pollution Bulletin, 177, https://doi.org/10.1016/j.marpolbul.2022.113462 Bansagi Jr, T., Wrobel, M.M., Scott, S.K. and Taylor, A.F. (2013). Motion and Interaction of Aspirin Crystals at Aqueous–Air Interfaces. The Journal of Physical Chemistry B, 117(43), https://doi.org/10.1021/jp405364c Bergfreund, J., Siegenthaler, S., Lutz-Bueno, V., Bertsch, P. and Fischer, P. (2021). Surfactant Adsorption to Different Fluid Interfaces. Langmuir, https://dx.doi.org/10.1021/acs.langmuir.1c00668 Bielefeldt, A., Gutierrez-Padilla, M.G.D., Ovtchinnikov, S., Silverstein, J. and Hernandez, M. (2010). Bacterial kinetics of sulfur oxidizing bacteria and their biodeterioration rates of concrete sewer pipe samples. Journal of Environmental Engineering, 136(7), https://dx.doi.org/10.1061/(ASCE)EE.1943-7870.0000215 Clark, B.A. and Brown, P.W. (1999). Formation of ettringite from monosubstituted calcium sulfoaluminate hydrate and gypsum. Journal of the American Ceramic Society, 82(10), https://dx.doi.org/10.1111/j.1151-2916.1999.tb02174.x Dehghani, S., Moore, F. and Akhbarizadeh, R.(2017). Microplastic pollution in deposited urban dust, Tehran metropolis, Iran. Environmental Science and Pollution Research, 24(25), https://doi.org/10.1007/s11356-017-9674-1 Dominic, C.C.S., Szakasits, M., Dean, L.O. and Ducoste, J.J. (2013). Understanding the spatial formation and accumulation of fats, oils and grease deposits in the sewer collection system. Water science and technology, 68(8), https://dx.doi.org/10.2166/wst.2013.428 Gross, M.A., Jensen, J.L., Gracz, H.S., Dancer, J. and Keener, K.M. (2017). Evaluation of physical and chemical properties and their interactions in fat, oil, and grease (FOG) deposits. Water research, 123, https://dx.doi.org/10.1016/j.watres.2017.06.072 He, X., Francis Iii, L., Leming, M.L., Dean, L.O., Lappi, S.E. and Ducoste, J.J. (2013). Mechanisms of fat, oil and grease (FOG) deposit formation in sewer lines. Water research, 47(13), https://dx.doi.org/10.1016/j.watres.2013.05.002 He, X., Iasmin, M., Dean, L.O., Lappi, S.E., Ducoste, J.J. and de los Reyes III, F.L. (2011). Evidence for fat, oil, and grease (FOG) deposit formation mechanisms in sewer lines. Environmental science & technology, 45(10), https://dx.doi.org/10.1021/es2001997 Howse, J.R., Steitz, R., Pannek, M., Simon, P., Schubert, D.W. and Findenegg, G.H. (2001). Adsorbed surfactant layers at polymer/liquid interfaces. A neutron reflectivity study. Physical Chemistry Chemical Physics, 3(18), pp.4044-4051 Huber, B., Herzog, B., Drewes, J.E., Koch, K. and Müller, E. (2016). Characterization of sulfur oxidizing bacteria related to biogenic sulfuric acid corrosion in sludge digesters. BMC microbiology, 16(1), https://dx.doi.org/10.1186/s12866-016-0767-7 Ida, S. and Eva, T. (2021). Removal of Heavy Metals during Primary Treatment of Municipal Wastewater and Possibilities of Enhanced Removal: A Review. Water, 13(8), https://doi.org/10.3390/w13081121 Igathinathane, C., Pordesimo, L.O., Columbus, E.P., Batchelor, W.D. and Methuku, S.R. (2008). Shape identification and particles size distribution from basic shape parameters using ImageJ. Computers and electronics in agriculture, 63(2). Ingram, T., Storm, S., Kloss, L., Mehling, T., Jakobtorweihen, S. and Smirnova, I. (2013). Prediction of micelle/water and liposome/water partition coefficients based on molecular dynamics simulations, COSMO-RS, and COSMOmic. Langmuir, 29(11), https://dx.doi.org/10.1021/la305035b Jain, A., Metzger, M.J. and Glasser, B.J. (2013). Effect of particle size distribution on segregation in vibrated systems. Powder technology, 237, https://dx.doi.org/10.1016/j.powtec.2012.12.044 Keener, K.M., Ducoste, J.J. and Holt, L.M. (2008). Properties influencing fat, oil, and grease deposit formation. Water environment research, 80(12), https://dx.doi.org/10.2175/193864708X267441 Li, X., Kappler, U., Jiang, G. and Bond, P.L. (2017). The ecology of acidophilic microorganisms in the corroding concrete sewer environment. Frontiers in microbiology, 8, https://dx.doi.org/10.3389/fmicb.2017.00683 Li, Y., Pham, J.Q., Johnston, K.P. and Green, P.F. (2007). Contact angle of water on polystyrene thin films: Effects of CO2 environment and film thickness. Langmuir, 23(19), https://dx.doi.org/10.1021/la0636311 Nieuwenhuis, E., Langeveld, J. and Clemens, F. (2018). The relationship between fat, oil and grease (FOG) deposits in building drainage systems and FOG disposal patterns. Water Science and Technology, 77(10), https://dx.doi.org/10.2166/wst.2018.173 Nikpay, M. (2022). Wastewater Fines Influence the Adsorption Behavior of Pollutants onto Microplastics. Journal of Polymers and the Environment, 30(2), https://doi.org/10.1007/s10924-021-02243-x Nikpay, M., Lazik, D. and Krebs, P. (2015). Water displacement by surfactant solution: an experimental study to represent wastewater loss from sewers to saturated soil. International journal of environmental science and technology, 12(8), https://dx.doi.org/10.1007/s13762-014-0681-1 O’Connell, M., McNally, C. and Richardson, M.G. (2010). Biochemical attack on concrete in wastewater applications: A state of the art review. Cement and Concrete Composites, 32(7), https://dx.doi.org/10.1016/j.cemconcomp.2010.05.001 Otsuka, T., Yamazaki, H., Ankyu, E., Ahamed, T., Anda, M. and Noguchi, R. (2020). Elucidation of the mechanism of blockage in sewer pipes by fatty acid deposition and suspended solid. Water, 12(8), https://dx.doi.org/10.3390/w12082291 Pohlman, N.A., Severson, B.L., Ottino, J.M. and Lueptow, R.M. (2006). Surface roughness effects in granular matter: Influence on angle of repose and the absence of segregation. Physical Review E, 73(3), https://dx.doi.org/10.1103/PhysRevE.73.031304 Razeghi, N., Hamidian, A.H., Wu, C., Zhang, Y. and Yang, M. (2021). Scientific studies on microplastics pollution in Iran: an in-depth review of the published articles. Marine Pollution Bulletin, 162, https://doi.org/10.1016/j.marpolbul.2020.111901 Roberts, D.J., Nica, D., Zuo, G. and Davis, J.L. (2002). Quantifying microbially induced deterioration of concrete: initial studies. International Biodeterioration & Biodegradation, 49(4), pp.227-234, https://doi.org/10.1016/S0964-8305(02)00049-5 Satoh, H., Odagiri, M., Ito, T. and Okabe, S. (2009). Microbial community structures and in situ sulfate-reducing and sulfur-oxidizing activities in biofilms developed on mortar specimens in a corroded sewer system. Water research, 43(18), https://dx.doi.org/10.1016/j.watres.2009.07.035 Schessl, M., Johns, C. and Ashpole, S.L. (2019). Microbeads in Sediment, Dreissenid Mussels, and Anurans in the Littoral Zone of the Upper St. Lawrence River, New York. Pollution, 5(1), https://doi.org/10.22059/poll.2018.257596.468 Sepehr, M.N., Zarrabi, M., Kazemian, H., Amrane, A., Yaghmaian, K. and Ghaffari, H.R. (2013). Removal of hardness agents, calcium and magnesium, by natural and alkaline modified pumice stones in single and binary systems. Applied Surface Science, 274, https://dx.doi.org/10.1016/j.apsusc.2013.03.042 Tokuda, K., Ogino, T., Kotera, M. and Nishino, T. (2015). Simple method for lowering poly (methyl methacrylate) surface energy with fluorination. Polymer Journal, https://dx.doi.org/10.1038/pj.2014.91 Verdú, I., Amariei, G., Plaza-Bolaños, P., Agüera, A., Leganés, F., Rosal, R. and Fernández-Piñas, F. (2022). Polystyrene nanoplastics and wastewater displayed antagonistic toxic effects due to the sorption of wastewater micropollutants. Science of the Total Environment, https://doi.org/10.1016/j.scitotenv.2022.153063. Viaroli, S., Lancia, M. and Re, V. (2022). Microplastics contamination of groundwater: Current evidence and future perspectives. A review. Science of the Total Environment, https://doi.org/10.1016/j.scitotenv.2022.153851 Wallace, T., Gibbons, D., O’Dwyer, M. and Curran, T.P. (2017). International evolution of fat, oil and grease (FOG) waste management–A review. Journal of environmental management, 187, https://dx.doi.org/10.1016/j.jenvman.2016.11.003 Williams, J.B., Clarkson, C., Mant, C., Drinkwater, A. and May, E. (2012). Fat, oil and grease deposits in sewers: Characterisation of deposits and formation mechanisms. Water research, 46(19), https://dx.doi.org/10.1016/j.watres.2012.09.002 | ||
آمار تعداد مشاهده مقاله: 1,290 تعداد دریافت فایل اصل مقاله: 678 |