|تعداد مشاهده مقاله||104,958,457|
|تعداد دریافت فایل اصل مقاله||82,031,637|
Removal of Thymol Blue from Aqueous Solution by Natural and Modified Bentonite: Comparative Analysis of ANN and ANFIS Models for the Prediction of Removal Percentage
|دوره 7، شماره 4، دی 2021، صفحه 959-980 اصل مقاله (1.45 M)|
|نوع مقاله: Original Research Paper|
|شناسه دیجیتال (DOI): 10.22059/poll.2021.326041.1125|
|Hülya Koyuncu 1؛ Adnan Aldemir2؛ Ali Rıza Kul3؛ Murat Canayaz4|
|1Department of Chemical Engineering, Faculty of Engineering and Natural Sciences, University of Bursa Technical, P.O.Box 16310, Bursa, Turkey|
|2Department of Chemical Engineering, Faculty of Engineering, University of Van Yüzüncü Yıl, P.O.Box 65080, Van, Turkey|
|3Department of Chemistry, Faculty of Science, University of Van Yüzüncü Yıl, P.O.Box 65080, Van, Turkey|
|4Department of Computer Engineering, Faculty of Engineering, University of Van Yüzüncü Yıl, P.O.Box 65080, Van, Turkey|
|In this study natural bentonite (NB) and acid-thermal co-modified bentonite (MB) were utilized as adsorbents for the removal of Thymol Blue (TB) from aqueous solution. The batch adsorption experiments were conducted under different experimental conditions. The artificial neural network (ANN) and adaptive neuro fuzzy inference systems (ANFIS) were applied to estimate removal percentage (%) of TB. Mean squared error (MSE), root mean square error (RMSE) and coefficient of determination (R2) values were used to evaluate the results. In addition, the experimental data were fitted isotherm models (Langmuir, Freundlich and Temkin) and kinetic models (pseudo first order (PFO), pseudo second order (PSO) and intra-particle diffusion (IPD)). The adsorption of TB on both the NB and MB followed well the PSO kinetic model, and was best suited Langmuir isotherm model. When the temperature was increased from 298 K to 323 K for 20 mg/L of TB initial concentration, the removal percentage of TB onto the NB and MB increased from 74.91% to 84.07% and 81.19% to 93.12%, respectively. This results were confirmed by the positive ΔH° values indicated that the removal process was endothermic for both the NB and MB. The maximum adsorption capacity was found as 48.7805 mg/g and 117.6471 mg/g for the NB and MB, respectively (at 323 K). As a result, with high surface area and adsorption capacity, the MB is a great candidate for TB dye removal from wastewater, and the ANFIS model is better than the ANN model at estimating the removal percentage of the dye.|
|Adsorption؛ Bentonite؛ Thymol Blue؛ Artificial Neural Networks؛ ANFIS|
Adeyemo, A.A., Adeoye I.O. and Bello, O.S. (2017). Adsorption of dyes using different types of clay: a review. Appl. Water. Sci. 7, 543–568.
Alexander, J,A,, Zaini, M.A.A., Surajudeen, A., Aliyu, E.N.U. and Omeiza, A.U. (2019). Surface modification of low-cost bentonite adsorbents - a review. Part. Sci. Technol. 37(5), 538-549.
Baghban, A., Bahadori, A., Mohammadi, A.H. and Behbahaninia, A. (2017). Prediction of CO2 loading capacities of aqueous solutions of absorbents using different computational schemes. Int. J. Greenh. Gas Con. 57, 143–161.
Banerjee, P., Sau, S., Das, P. and Mukhopadhayay, A. (2015). Optimization and modelling of synthetic azo dye wastewater treatment using graphene oxide nanoplatelets: characterization toxicity evaluation and optimization using artificial neural network. Ecotoxicol. Environ. Saf. 119, 47–57.
Canayaz, M. (2019). Training anfis system with moth-flame optimization algorithm. Int. J. Intell. Syst. Appl. Eng. 7(3), 133-144.
Cheng, Y., Feng, Q., Ren, X., Yin, M., Zhou, Y. and Xue, Z. (2015). Adsorption and removal of sulfonic dyes from aqueous solution onto a coordination polymeric xerogel with amino groups. Colloids Surf. A. 485, 125-135.
Cheruiyot, G.K., Wanyonyi, W.C., Kiplimo, J.J. and Maina, E.N. (2019). Adsorption of toxic crystal violet dye using coffee husks: Equilibrium, kinetics and thermodynamics study. Scientific African. 5, 00116.
Dolatabadi, M., Mehrabpour, M., Esfandyari, M., Alidadi, H. and Davoudi, M. (2018). Modeling of simultaneous adsorption of dye and metal ion by sawdust from aqueous solution using of ANN and ANFIS. Chemometr. Intell. Lab. Syst. 181, 72-78.
Du, S., Wang, L., Xue, N., Pei, M., Sui, W. and Guo, W. (2017). Polyethyleneimine modified bentonite for the adsorption of amino black 10B. J. Solid. State Chem. 252, 152-157.
Ghaedi, A.M. and Vafaei, A. (2017). Applications of artificial neural networks for adsorption removal of dyes from aqueous solution: a review. Adv. Colloid Interface Sci. 245, 20-39.
Ghaedi, M., Daneshfar, A., Ahmadi, A. and Momeni, M.S. (2015). Artificial neural network-genetic algorithm based optimization for the adsorption of phenol red (PR) onto gold and titanium dioxide nanoparticles loaded on activated carbon. J. Ind. Eng. Chem. 21, 587-598.
Ghaedi, M., Hosaininia, R., Ghaedi, A.M., Vafaei, A. and Taghizadeh, F. (2014). Adaptive neurofuzzy inference system model for adsorption of 1,3,4-thiadiazole-2,5-dithiol onto gold nanoparticles-activated carbon. Spectrochim. Acta A. 131. 606–614.
Ghaleh, S.P., Khodapanah, E. and Tabatabaei-Nezhad, S.A. (2020). Comprehensive monolayer two-parameter isotherm and kinetic studies of thiamine adsorption on clay minerals: experimental and modeling approaches. J. Mo.l Liq. 306, 112942.
Ghosal, P.S., Kattil, K.V., Yadav, M.K. and Gupta, A.K. (2018). Adsorptive removal of arsenic by novel iron/olivine composite: insights into preparation and adsorption process by response surface methodology and artificial neural network. J. Environ. Manage. 209, 176–187.
Hamad, M.I.H. and Hanan, M.M.A. (2018). Removing of thymol blue from aqueous solutions by pomegranate peel. The Third International Conference On Basic Sciences & Their Applications. 1(1), 111-119.
Ho, Y.S. and Mckay, G. (1998). Kinetic models for the sorption of dye from aqueous solution by wood. Process Saf. Environ. Prot. 76(B2), 183-191.
Huang, Z., Li, Y., Chen, W., Shi, J., Zhang, N., Wang, X., Li, Z., Gao, L. and Zhang, Y. (2017). Modified bentonite adsorption of organic pollutants of dye wastewater. Mater. Chem. Phys. 202, 266-276.
Kausar, A., Iqbal, M., Javed, A., Aftab, K., Nazli, Z.H., Bhatti, H.N. and Nouren, S. (2018). Dyes adsorption using clay and modified clay: A review. J. Mol. Liq. 256, 395-407.
Koyuncu, H. and Kul, A.R. (2020). Synthesis and characterization of a novel activated carbon
using nonliving lichen cetraria islandica (L.) ach. and its application in water remediation: Equilibrium, kinetic and thermodynamic studies of malachite green removal from aqueous media. Surf. Interfaces. 21, 100653.
Kul, A.R. and Koyuncu, H. (2010). Adsorption of Pb(II) ions from aqueous solution by native and activated bentonite: kinetic equilibrium and thermodynamic study. J. Hazard. Mater. 179, 332-339.
Langergren, S. and Svenska, B.K. (1898). Zur theorie der sogenannten adsorption geloester stoffe Veternskapsakad Handlingar. 24, 1-39.
Leodopoulos, Ch., Doulia, D., Gimouhopoulos, K. and Triantis, T.M. (2012). Single and simultaneous adsorption of methyl orange and humic acid onto bentonite. Appl. Clay. Sci. 70, 84-90.
Madan, S.S., Wasewar, K.L. and Pandharipande, S.L. (2016.) Modeling the adsorption of benzene acetic acid on CaO2 nanoparticles using artificial neural network. Resour. Tech. 2, 53–62.
Mahmoodi-Babolan, N., Heydari, A. and Nematollahzadeh, A. (2019). Removal of methylene blue via bioinspired catecholamine/starch superadsorbent and the efficiency prediction by response surface methodology and artificial neural network-particle swarm optimization. Bioresour. Technol. 294, 1-8.
Miyoshi, Y., Tsukimura, K., Morimoto, K., Suzuki, M. and Takagi, T. (2018). Comparison of methylene blue adsorption on bentonite measured using the spot and colorimetric methods. Appl. Clay. Sci. 151, 140-147.
Mondal, S., Aikat, K., Siddharth, K., Sarkar, K., DasChaudhury, R., Mandal, G. and Halder, G. (2017). Optimizing ranitidine hydrochloride uptake of parthenium hysterophorus derived N–biochar through response surface methodology and artificial neural network. Process Saf. Environ. Prot. 107, 388–401.
Ngulube, T., Gumbo, J.R., Masindi, V. and Maity, A. (2017). An update on synthetic dyes adsorption onto clay based minerals: a state-of-art review. J. Environ. Manage. 191, 35-57.
Oussalah, A., Boukerroui, A., Aichour, A. and Djellouli, B. (2019). Cationic and anionic dyes removal by low-cost hybrid alginate/natural bentonite composite beads: adsorption and reusability studies. Int. J. Biol. Macromol. 124, 854-862.
Pauletto, P.S., Gonçalves, J.O., Pinto, L.A.A., Dotto, G.L. and Salau, N.P.G. (2020). Single and competitive dye adsorption onto chitosan–based hybrid hydrogels using artificial neural network modeling. J. Colloid Interface Sci. 560, 722-729.
Poznyak, A., Chairez, I. and Poznyak, T. (2019). A survey on artificial neural networks application for identification and control in environmental engineering: biological and chemical systems with uncertain models. Annu. Rev. Control. 48, 250-272.
Raoufi, F. and Aghaie, H. (2017). Adsorption of thymol blue and Erythrosine-B on MWCNTs functionalized by N-(3-nitrobenzylidene)-N'-trimethoxysilylpropyl-ethane-1,2-diamine: equilibrium, kinetics and thermodynamic study. Orient J. Chem. 33(5), 2542-2550.
Rego, A.S.C., Valim, I.C., Vieira, A.A.S., Vilani, C. and Santos, B.F. (2018). Optimization of sugarcane bagasse pretreatment using alkaline hydrogen peroxide through ANN and ANFIS modelling. Bioresour. Technol. 267, 634–641.
Shankar, K., Elhoseny, M., Lakshmanaprabu, S.K., Ilayaraja, M., Vidhyavathi, R.M., Elsoud, M.A. and Alkhambashi, M. (2018). Optimal feature level fusion based ANFIS classifier for brain MRI image classification. Concurrency Computat. Pract. Exper. 32, 4887.
Souza, P.R., Dotto, G.L. and Salau, N.P.G. (2019). Experimental and mathematical modeling of hindered diffusion effect of cationic dye in the adsorption onto bentonite. J. Environ. Chem. Eng. 7, 1-7.
Tajmiri, S., Azimi, E., Hosseini, M.R. and Azimi, Y. (2020). Evolving multilayer perceptron, and factorial design for modelling and optimization of dye decomposition by bio-synthetized nano CdS-diatomite composite. Environ. Res. 182, 1-13.
Tayebi, H.A., Ghanei, M., Aghajani, K. and Zohrevandi, M. (2019). Modeling of reactive orange 16 dye removal from aqueous media by mesoporous silica/crosslinked polymer hybrid using RBF MLP and GMDH neural network models. J. Mol. Struct. 1178, 514-523.
Weber, W.J. and Morris, J.C. (1963). Kinetics of adsorption on carbon from solution. J. Sanit. Eng. Div. 89, 31-60.
Yagub, M.T., Sen, T.K., Afroze, S. and Ang, H.M. (2014). Dye and its removal from aqueous solution by adsorption: a review. Adv. Colloid Interface Sci. 209, 172-184.
Yıldız, Z. and Uzun, H. (2015). Prediction of gas storage capacities in metal organic frameworks using artificial neural network. Micropor. Mesopor. Mat. 208, 50–54.
تعداد مشاهده مقاله: 420
تعداد دریافت فایل اصل مقاله: 330