سامانه پشتیبانی خدمات اطلاعات

  اخبار و اعلانات

 آمار

تعداد نشریات161
تعداد شماره‌ها6,533
تعداد مقالات70,518
تعداد مشاهده مقاله124,132,796
تعداد دریافت فایل اصل مقاله97,238,676
Biati, A., Khezri, S.M., Mohammadi Bidokhti, A.. (1393). Determination of Optimum Exposure Time and pH for dye Adsorption using an Adsorbent made of Sewage Sludge. , 8(3), 653-658. doi: 10.22059/ijer.2014.760
A. Biati; S.M. Khezri; A. Mohammadi Bidokhti. "Determination of Optimum Exposure Time and pH for dye Adsorption using an Adsorbent made of Sewage Sludge". , 8, 3, 1393, 653-658. doi: 10.22059/ijer.2014.760
Biati, A., Khezri, S.M., Mohammadi Bidokhti, A.. (1393). 'Determination of Optimum Exposure Time and pH for dye Adsorption using an Adsorbent made of Sewage Sludge', , 8(3), pp. 653-658. doi: 10.22059/ijer.2014.760
Biati, A., Khezri, S.M., Mohammadi Bidokhti, A.. Determination of Optimum Exposure Time and pH for dye Adsorption using an Adsorbent made of Sewage Sludge. , 1393; 8(3): 653-658. doi: 10.22059/ijer.2014.760

Determination of Optimum Exposure Time and pH for dye Adsorption using an Adsorbent made of Sewage Sludge

International Journal of Environmental Research
مقاله 16، دوره 8، شماره 3، مهر 2014، صفحه 653-658    اصل مقاله (234.47 K)
نوع مقاله: Original Research Paper
شناسه دیجیتال (DOI): 10.22059/ijer.2014.760
نویسندگان
A. Biati* 1؛ S.M. Khezri2؛ A. Mohammadi Bidokhti2
1Department of Natural Resources Engineering-Environment, Graduate Faculty of Environment and Energy, Science and Research Branch , Islamic Azad University, Tehran, Iran
2Department of Environmental Engineering, Graduate Faculty of Environment and Energy, Science and Research Branch , Islamic Azad University, Tehran, Iran
چکیده
In this research feasibility study of using sewage sludge as an adsorbent for the removal of Acid
Blue 25 dye was carried out. Sewage sludge was first dried in an oven at 105° C for 24 hours. Then the dried
sludge was washed with HCl (98%) for two hours and then with distilled water to a pH of approximately
neutral. Then, it was carbonated and activated in a Nitrogen-based electric furnace at 600C° for two hours.
Molecular Structure of the adsorbent was determined through XRD technique. The results of XRD revealed
that the adsorbent produced for this study was mainly composed of SiO2. The experiments were carried out
at pH of 3, 5, 7, 9, and 11 and for exposure times of 0, 15, 30, 60 and 120 minutes in the process of dye
removal. In all steps of the experiment, dye solutions with different initial concentrations of 100, 200, and 300 mg/L and the adsorbent dosage of 10 g/L were constantly used. Finally, pH of 3 and exposure time of 30 minutes were found as the optimum condition. The maximum dye removal (97%) was achieved at 100 mg/L of dye solution. Adsorbent specifications follow Langmuir and Freunlich isotherm model.
کلیدواژه‌ها
Sewage sludge, Dye Removal, Adsorbent؛ Isotherm models, Acid Blue25
آمار
تعداد مشاهده مقاله: 3,646
تعداد دریافت فایل اصل مقاله: 2,536


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب