Evaluation of Applying Solvent Extraction and Iron Nanoparticles for Oily Sludge Recovery and Upgrading Based on Sludge Specifications | ||
| Pollution | ||
| مقاله 1، دوره 5، شماره 3، پاییز 2019، صفحه 449-461 اصل مقاله (623.77 K) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/poll.2018.260045.461 | ||
| نویسندگان | ||
| F. Nezhadbahadori؛ M. A. Abdoli* ؛ M. Baghdadi | ||
| School of environment, College of Engineering, University of Tehran, Tehran, Iran | ||
| چکیده | ||
| Due to its wide range of hazardous hydrocarbons and even heavy metal ions, oily sludge has become a great environmental challenge which must be dealt with quite quickly. As a result, ther have been numerous efforts during recent years to develop an efficient method for sludge recovery. The current research studies the effectiveness of solvent extraction with toluene and Fe2O3 nanoparticles for recovery and upgrading of oily sludge. Having employed Design of Experiment (DOE), it has found optimum conditions for sludge recovery with solvent extraction, namely a temperature of 55°C and mixing time of 17 minutes with solvent to sludge ratio of 6.4/4.2. Under these conditions, the sludge recovery has been 37%, which is the maximum available with toluene. Furthermore, it has studied the effectiveness of Fe2O3 nanoparticles for improvement of sludge pyrolysis efficiency in order to upgrade the oily sludge, wherein it has been observed that nanoparticles can significantly decrease the temperature and time of reaching maximum conversion during sludge pyrolysis process. The temperature and time of reaching to the maximum conversion, by means of gamma Fe2O3 nanoparticles, is about 200°C and 1200 s, respectively, which is lower than the condition in which pure sludge is being pyrolyzed. | ||
| کلیدواژهها | ||
| Oily sludge؛ recovery؛ upgrading؛ solvent extraction؛ iron nanoparticles | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 1,220 تعداد دریافت فایل اصل مقاله: 1,010 |
||