Damage Detection of Axially Loaded Beam: A Frequency-Based Method | ||
| Civil Engineering Infrastructures Journal | ||
| مقاله 12، دوره 49، شماره 1، شهریور 2016، صفحه 165-172 اصل مقاله (533.94 K) | ||
| نوع مقاله: Technical Notes | ||
| شناسه دیجیتال (DOI): 10.7508/ceij.2016.01.012 | ||
| نویسندگان | ||
| Omid Rezaifar1؛ Mohammad Reza Doostmohammadi* 2 | ||
| 1Assistant Professor of Civil Engineering Department, Research Institute of Advanced Technology in Civil Engineering, Semnan University, Semnan, Iran. | ||
| 2M.Sc, Research Institute of Advanced Technology in Civil Engineering, Semnan University, Semnan, Iran. | ||
| چکیده | ||
| The present study utilizes an analytical method to formulate the three lowest modal frequencies of axially-loaded notched beam through both crack location and load level in a specific format that can be used in existing frequency-based crack-identification methods. The proposed formula provides a basis to shift into two states, one with axial loading and the other without any loading whatsoever. When any two natural frequencies in simply-supported beam with an open crack, subjected to axial load, are measured, crack position and extent can be determined, using a characteristic equation, which is a function of crack location, sectional flexibility, and eigenvalue (natural frequency). Theoretical results show high accuracy for service axial loads. In this range, errors for crack location and extent are less than 12% and 10%, respectively. | ||
| کلیدواژهها | ||
| Axial Load؛ Characteristic Equation؛ Damage Detection؛ Eigen Frequency؛ Notched Beam | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 2,051 تعداد دریافت فایل اصل مقاله: 1,935 |
||