Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran

1. Karjalainen LP, Taulavuori T, Sellman M, Kyröläinen A. Some Strengthening Methods for Austenitic Stainless Steels. steel research international. 2008;79(6):404-12.

2. Sohrabi MJ, Naghizadeh M, Mirzadeh H. Deformation-induced martensite in austenitic stainless steels: A review. Archives of Civil and Mechanical Engineering. 2020;20(4).

3. Maki T. Stainless steel: progress in thermomechanical treatment. Current Opinion in Solid State and Materials Science. 1997;2(3):290-5.

4. Talonen J, Hänninen H. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels. Acta Materialia. 2007;55(18):6108-18.

5. Padilha AF, Plaut RL, Rios PR. Annealing of Cold-worked Austenitic Stainless Steels. ISIJ International. 2003;43(2):135-43.

6. Mehranfar M, Dehghani K. Producing nanostructured super-austenitic steels by friction stir processing. Materials Science and Engineering: A. 2011;528(9):3404-8.

7. Mohammad Nejad Fard N, Mirzadeh H, Mohammad R, Cabrera JM. Accumulative roll bonding of aluminum/stainless steel sheets. Journal of Ultrafine Grained and Nanostructured Materials. 2017 Jun 1;50(1):1-5.

8. Salvatori I, Inoue T, Nagai K. Ultrafine Grain Structure through Dynamic Recrystallization for Type 304 Stainless Steel. ISIJ International. 2002;42(7):744-50.

9. Souza RC, Silva ES, Jorge AM, Cabrera JM, Balancin O. Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: Influence of strain rate and temperature. Materials Science and Engineering: A. 2013;582:96-107.

10. Mirzadeh H, Cabrera JM, Najafizadeh A, Calvillo PR. EBSD study of a hot deformed austenitic stainless steel. Materials Science and Engineering: A. 2012;538:236-45.

11. Dehghan-Manshadi A, Barnett MR, Hodgson PD. Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation. Materials Science and Engineering: A. 2008;485(1-2):664-72.

12. Tomimura K, Takaki S, Tanimoto S, Tokunaga Y. Optimal Chemical Composition in Fe-Cr-Ni Alloys for Ultra Grain Refining by Reversion from Deformation Induced Martensite. ISIJ International. 1991;31(7):721-7.

13. Soleimani M, Kalhor A, Mirzadeh H. Transformation-induced plasticity (TRIP) in advanced steels: A review. Materials Science and Engineering: A. 2020;795:140023.

14. Zergani A, Mirzadeh H, Mahmudi R. Evolutions of mechanical properties of AISI 304L stainless steel under shear loading. Materials Science and Engineering: A. 2020;791:139667.

15. Eskandari M, Zarei-Hanzaki A, Abedi HR. An investigation into the room temperature mechanical properties of nanocrystalline austenitic stainless steels. Materials & Design. 2013;45:674-81.

16. Amininejad A, Jamaati R, Hosseinipour SJ. Improvement of strength-ductility balance of SAE 304 stainless steel by asymmetric cross rolling. Materials Chemistry and Physics. 2020;256:123668.

17. Shirdel M, Mirzadeh H, Parsa MH. Estimation of the kinetics of martensitic transformation in austenitic stainless steels by conventional and novel approaches. Materials Science and Engineering: A. 2015;624:256-60.

18. Mirzaie T, Mirzadeh H, Naghizadeh M. Contribution of Different Hardening Mechanisms during Cold Working of AISI 304L Austenitic Stainless Steel. Archives of Metallurgy and Materials. 2018;63.

19. Zergani A, Mirzadeh H, Mahmudi R. Unraveling the Effect of Deformation Temperature on the Mechanical Behavior and Transformation‐Induced Plasticity of the SUS304L Stainless Steel. steel research international. 2020;91(9):2000114.

20. Lo KH, Shek CH, Lai JKL. Recent developments in stainless steels. Materials Science and Engineering: R: Reports. 2009;65(4-6):39-104.

21. Olson GB, Cohen M. Kinetics of strain-induced martensitic nucleation. Metallurgical Transactions A. 1975;6(4):791-5.

22. Hamada AS, Karjalainen LP, Misra RDK, Talonen J. Contribution of deformation mechanisms to strength and ductility in two Cr–Mn grade austenitic stainless steels. Materials Science and Engineering: A. 2013;559:336-44.

23. Naghizadeh M, Mirzadeh H. Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel. Vacuum. 2018;157:243-8.

24. Järvenpää A, Jaskari M, Kisko A, Karjalainen P. Processing and Properties of Reversion-Treated Austenitic Stainless Steels. Metals. 2020;10(2):281.

25. Behjati P, Kermanpur A, Najafizadeh A. Application of Martensitic Transformation Fundamentals to Select Appropriate Alloys for Grain Refining Through Martensite Thermomechanical Treatment. Metallurgical and Materials Transactions A. 2013;44(8):3524-31.

26. Parnian P, Parsa MH, Mirzadeh H, Jafarian HR. Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire. steel research international. 2017;88(8):1600423.

27. Kisko A, Misra RDK, Talonen J, Karjalainen LP. The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr–9Mn–Ni–Cu stainless steel. Materials Science and Engineering: A. 2013;578:408-16.

28. Souza Filho IR, Sandim MJR, Cohen R, Nagamine LCCM, Hoffmann J, Bolmaro RE, et al. Effects of strain-induced martensite and its reversion on the magnetic properties of AISI 201 austenitic stainless steel. Journal of Magnetism and Magnetic Materials. 2016;419:156-65.

29. Järvenpää A, Jaskari M, Karjalainen L. Reversed Microstructures and Tensile Properties after Various Cold Rolling Reductions in AISI 301LN Steel. Metals. 2018;8(2):109.

30. Xu DM, Li GQ, Wan XL, Misra RDK, Zhang XG, Xu G, et al. The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steel. Materials Science and Engineering: A. 2018;720:36-48.

31. Kisko A, Hamada AS, Talonen J, Porter D, Karjalainen LP. Effects of reversion and recrystallization on microstructure and mechanical properties of Nb-alloyed low-Ni high-Mn austenitic stainless steels. Materials Science and Engineering: A. 2016;657:359-70.

32. Sun GS, Du LX, Hu J, Misra RDK. Microstructural evolution and recrystallization behavior of cold rolled austenitic stainless steel with dual phase microstructure during isothermal annealing. Materials Science and Engineering: A. 2018;709:254-64.

33. Somani MC, Juntunen P, Karjalainen LP, Misra RDK, Kyröläinen A. Enhanced Mechanical Properties through Reversion in Metastable Austenitic Stainless Steels. Metallurgical and Materials Transactions A. 2009;40(3):729-44.

34. Schino AD, Salvatori I, Kenny JM. Effects of martensite formation and austenite reversion on grain refining of AISI 304 stainless steel. Journal of Materials Science. 2002 Nov 1;37(21):4561-5.

35. Li J, Cao Y, Gao B, Li Y, Zhu Y. Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure. Journal of Materials Science. 2018;53(14):10442-56.

36. Li J, Gao B, Huang Z, Zhou H, Mao Q, Li Y. Design for strength-ductility synergy of 316L stainless steel with heterogeneous lamella structure through medium cold rolling and annealing. Vacuum. 2018;157:128-35.

37. Wang S, Li J, Cao Y, Gao B, Mao Q, Li Y. Thermal stability and tensile property of 316L stainless steel with heterogeneous lamella structure. Vacuum. 2018;152:261-4.

38. Mirzadeh H, Najafizadeh A. Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel. Materials Characterization. 2008;59(11):1650-4.

39. Mirzadeh H, Najafizadeh A. ANN modeling of strain-induced martensite and its applications in metastable austenitic stainless steels. Journal of Alloys and Compounds. 2009;476(1-2):352-5.

40. Mirzadeh H, Najafizadeh A. Modeling the reversion of martensite in the cold worked AISI 304 stainless steel by artificial neural networks. Materials & Design. 2009;30(3):570-3.

41. Naghizadeh M, Mirzadeh H. Microstructural Evolutions During Annealing of Plastically Deformed AISI 304 Austenitic Stainless Steel: Martensite Reversion, Grain Refinement, Recrystallization, and Grain Growth. Metallurgical and Materials Transactions A. 2016;47(8):4210-6.

42. Kheiri S, Mirzadeh H, Naghizadeh M. Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing. Materials Science and Engineering: A. 2019;759:90-6.

43. Sohrabi MJ, Mirzadeh H, Dehghanian C. Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels. Journal of Materials Engineering and Performance. 2020;29(5):3233-42.

44. Shirdel M, Mirzadeh H, Parsa MH. Enhanced Mechanical Properties of Microalloyed Austenitic Stainless Steel Produced by Martensite Treatment. Advanced Engineering Materials. 2015;17(8):1226-33.

45. Sadeghpour S, Kermanpur A, Najafizadeh A. Influence of Ti microalloying on the formation of nanocrystalline structure in the 201L austenitic stainless steel during martensite thermomechanical treatment. Materials Science and Engineering: A. 2013;584:177-83.

46. Behjati P, Kermanpur A, Najafizadeh A, Samaei Baghbadorani H, Karjalainen LP, Jung JG, et al. Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy. Materials & Design. 2014;63:500-7.

47. Moallemi M, Kermanpur A, Najafizadeh A, Rezaee A, Samaei baghbadorani H. Formation of nano/ultrafine grain structure in a 201 stainless steel through the repetitive martensite thermomechanical treatment. Materials Letters. 2012;89:22-4.

48. Eskandari M, Kermanpur A, Najafizadeh A. Formation of Nanocrystalline Structure in 301 Stainless Steel Produced by Martensite Treatment. Metallurgical and Materials Transactions A. 2009;40(9):2241-9.

49. Johannsen DL, Kyrolainen A, Ferreira PJ. Influence of annealing treatment on the formation of nano/submicron grain size AISI 301 Austenitic stainless steels. Metallurgical and Materials Transactions A. 2006;37(8):2325-38.

50. Gauzzi F, Montanari R, Principi G, Tata ME. AISI 304 steel: anomalous evolution of martensitic phase following heat treatments at 400°C. Materials Science and Engineering: A. 2006;438-440:202-6.

51. Shirdel M, Mirzadeh H, Parsa MH. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect. Materials Characterization. 2015;103:150-61.

52. Zhou Z, Wang S, Li J, Li Y, Wu X, Zhu Y. Hardening after annealing in nanostructured 316L stainless steel. Nano Materials Science. 2020;2(1):80-2.

53. Forouzan F, Najafizadeh A, Kermanpur A, Hedayati A, Surkialiabad R. Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process. Materials Science and Engineering: A. 2010;527(27-28):7334-9.

54. Shahri MG, Hosseini SR, Salehi M. Formation of Nano/Ultrafine Grains in AISI 321 Stainless Steel Using Advanced Thermo-Mechanical Process. Acta Metallurgica Sinica (English Letters). 2015;28(4):499-504.

55. Rezaei HA, Ghazani MS, Eghbali B. Effect of post deformation annealing on the microstructure and mechanical properties of cold rolled AISI 321 austenitic stainless steel. Materials Science and Engineering: A. 2018;736:364-74.

56. Bakhsheshi-Rad HR, Haerian B, Najafizadeh A, Idris MH, Kadir MRA, Hamzah E, et al. Cold deformation and heat treatment influence on the microstructures and corrosion behavior of AISI 304 stainless steel. Canadian Metallurgical Quarterly. 2013;52(4):449-57.

57. Sohrabi MJ, Mirzadeh H, Dehghanian C. Unraveling the effects of surface preparation on the pitting corrosion resistance of austenitic stainless steel. Archives of Civil and Mechanical Engineering. 2020;20(1).

58. Sabooni S, Rashtchi H, Eslami A, Karimzadeh F, Enayati MH, Raeissi K, et al. Dependence of corrosion properties of AISI 304L stainless steel on the austenite grain size. International Journal of Materials Research. 2017;108(7):552-9.

59. Nafar Dehsorkhi R, Sabooni S, Karimzadeh F, Rezaeian A, Enayati MH. The effect of grain size and martensitic transformation on the wear behavior of AISI 304L stainless steel. Materials & Design. 2014;64:56-62.

60. Shirdel M, Mirzadeh H, Parsa MH. Abnormal grain growth in AISI 304L stainless steel. Materials Characterization. 2014;97:11-7.

61. Shirdel M, Mirzadeh H, Habibi Parsa M. Microstructural Evolution During Normal/Abnormal Grain Growth in Austenitic Stainless Steel. Metallurgical and Materials Transactions A. 2014;45(11):5185-93.

62. Sabooni S, Karimzadeh F, Enayati MH. Thermal Stability Study of Ultrafine Grained 304L Stainless Steel Produced by Martensitic Process. Journal of Materials Engineering and Performance. 2014;23(5):1665-72.

63. Ma Y, Jin J, Lee Y. A repetitive thermomechanical process to produce nano-crystalline in a metastable austenitic steel. Scripta Materialia. 2005;52(12):1311-5.

64. Momeni A, Abbasi SM. Repetitive Thermomechanical Processing towards Ultra Fine Grain Structure in 301, 304 and 304L Stainless Steels. Journal of Materials Science & Technology. 2011;27(4):338-43.

65. Naghizadeh M, Mirzadeh H. Processing of fine grained AISI 304L austenitic stainless steel by cold rolling and high-temperature short-term annealing. Materials Research Express. 2018;5(5):056529.

66. Asghari-Rad P, Nili-Ahmadabadi M, Shirazi H, Hossein Nedjad S, Koldorf S. A Significant Improvement in the Mechanical Properties of AISI 304 Stainless Steel by a Combined RCSR and Annealing Process. Advanced Engineering Materials. 2017;19(3):1600663.

67. Sohrabi MJ, Mirzadeh H, Dehghanian C. Thermodynamics basis of saturation of martensite content during reversion annealing of cold rolled metastable austenitic steel. Vacuum. 2020;174:109220.

68. Tomimura K, Takaki S, Tokunaga Y. Reversion Mechanism from Deformation Induced Martensite to Austenite in Metastable Austenitic Stainless Steels. ISIJ International. 1991;31(12):1431-7.

69. Takaki S, Tomimura K, Ueda S. Effect of Pre-cold-working on Diffusional Reversion of Deformation Induced Martensite in Metastable Austenitic Stainless Steel. ISIJ International. 1994;34(6):522-7.

70. Misra RDK, Nayak S, Venkatasurya PKC, Ramuni V, Somani MC, Karjalainen LP. Nanograined/Ultrafine-Grained Structure and Tensile Deformation Behavior of Shear Phase Reversion-Induced 301 Austenitic Stainless Steel. Metallurgical and Materials Transactions A. 2010;41(8):2162-74.

71. Nasiri Z, Ghaemifar S, Naghizadeh M, Mirzadeh H. Thermal Mechanisms of Grain Refinement in Steels: A Review. Metals and Materials International. 2020.

72. Shakhova I, Dudko V, Belyakov A, Tsuzaki K, Kaibyshev R. Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel. Materials Science and Engineering: A. 2012;545:176-86.

73. Sabooni S, Karimzadeh F, Enayati MH, Ngan AHW. The role of martensitic transformation on bimodal grain structure in ultrafine grained AISI 304L stainless steel. Materials Science and Engineering: A. 2015;636:221-30.

74. Moallemi M, Zarei-Hanzaki A, Kim S-J, Alimadadi H. On the microstructural-textural characterization and deformation analysis of a nano/ultrafine grained Fe-20Cr-8Mn-0.3N duplex alloy with superior mechanical properties. Materials Characterization. 2019;156:109878.

75. Naghizadeh M, Mirzadeh H. Microstructural Effects of Grain Size on Mechanical Properties and Work‐Hardening Behavior of AISI 304 Austenitic Stainless Steel. steel research international. 2019;90(10):1900153.

76. Naghizadeh M, Mirzadeh H. Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel. Metallurgical and Materials Transactions A. 2018;49(6):2248-56.

77. Abdi A, Mirzadeh H, Sohrabi MJ, Naghizadeh M. Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel. Metallurgical and Materials Transactions A. 2020;51(5):1955-9.

78. Sharifian K, Mirzadeh H, Kheiri S, Naghizadeh M. Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel. International Journal of Materials Research. 2020;111(8):676-80.

79. Naghizadeh M, Mirzadeh H. Elucidating the Effect of Alloying Elements on the Behavior of Austenitic Stainless Steels at Elevated Temperatures. Metallurgical and Materials Transactions A. 2016;47(12):5698-703.

80. Mirzadeh H, Cabrera JM, Najafizadeh A. Constitutive relationships for hot deformation of austenite. Acta Materialia. 2011;59(16):6441-8.

81. Qin W, Li J, Liu Y, Kang J, Zhu L, Shu D, et al. Effects of grain size on tensile property and fracture morphology of 316L stainless steel. Materials Letters. 2019;254:116-9.

82. Li J, Zhou Z, Wang S, Mao Q, Fang C, Li Y, et al. Deformation mechanisms and enhanced mechanical properties of 304L stainless steel at liquid nitrogen temperature. Materials Science and Engineering: A. 2020;798:140133.

83. Gao S, Bai Y, Zheng R, Tian Y, Mao W, Shibata A, et al. Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel. Scripta Materialia. 2019;159:28-32.

84. A. Järvenpää, Microstructures, Mechanical stability and strength of low-temperature AISILN stainless steel under monotonic and dynamic loading, Ph.D. Thesis, University of Oulu, Oulu, Finland, 2019.

85. D. Maréchal, Linkage between Mechanical Properties and Phase Transformations in a 301LN Austenitic Stainless Steel, Ph.D. Thesis, University of British Columbia, Vancouver, BC, Canada, 2011.