Bernoosi, Samaneh, Azari Khosroshahi, Rasoul, Taherzadeh Mousavian, Reza. (1393). Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite. , 47(2), 63-70. doi: 10.7508/jufgnsm.2014.02.002
Samaneh Bernoosi; Rasoul Azari Khosroshahi; Reza Taherzadeh Mousavian. "Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite". , 47, 2, 1393, 63-70. doi: 10.7508/jufgnsm.2014.02.002
Bernoosi, Samaneh, Azari Khosroshahi, Rasoul, Taherzadeh Mousavian, Reza. (1393). 'Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite', , 47(2), pp. 63-70. doi: 10.7508/jufgnsm.2014.02.002
Bernoosi, Samaneh, Azari Khosroshahi, Rasoul, Taherzadeh Mousavian, Reza. Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite. , 1393; 47(2): 63-70. doi: 10.7508/jufgnsm.2014.02.002

Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite

Journal of Ultrafine Grained and Nanostructured Materials
مقاله 2، دوره 47، شماره 2، اسفند 2014، صفحه 63-70    اصل مقاله (1.14 M)
نوع مقاله: Research Paper
شناسه دیجیتال (DOI): 10.7508/jufgnsm.2014.02.002
نویسندگان
Samaneh Bernoosi1؛ Rasoul Azari Khosroshahi* 1؛ Reza Taherzadeh Mousavian2
1Faculty of Materials Engineering, Sahand University of Technology, Tabriz, Iran
2Young Researchers and Elite Club, Ilkhchi Branch, Islamic Azad University, Ilkhchi, Iran
چکیده
In this study, the elemental powders of aluminum and copper were initially subjected to mechanical alloying using an attrition ball mill under argon atmosphere to produce an Al-4.5 wt% Cu powder alloy. The WC nanoparticles were then added to the powder alloy and milled in a planetary ball mill to explore the role of the WC nanoparticles on the mechanical properties of the fabricated composite powder. The experimental results revealed that a solid solution of Al-Cu could be formed after MA and a good dispersion of the WC nanoparticles in the aluminum matrix was obtained as characterized using X-ray diffraction and scanning electron microscopy, respectively. The results of hardness and compression tests of the hot pressed composites indicated that the MA followed by the hot-press processes was successful to fabricate an alloy and a metal matrix composite with considerable mechanical properties. However, a decreasing trend in the hardness and strength of the composites with the WC contents of more than 5wt% was observed. The maximum values of 260 HV and 575 MPa were obtained for a composite containing 5 wt% of nano ceramic particles.
کلیدواژه‌ها
Al-4.5 wt% Cu؛ Metal matrix composite؛ Mechanical alloying؛ Microstructural characterization؛ WC nanoparticle
مراجع
آمار
تعداد مشاهده مقاله: 3,604
تعداد دریافت فایل اصل مقاله: 2,655