Analytical Solution for a Two-Layer Transversely Isotropic Half-Space Affected by an Arbitrary Shape Dynamic Surface Load | ||
| Civil Engineering Infrastructures Journal | ||
| مقاله 1، دوره 46، شماره 1، شهریور 2013، صفحه 1-14 اصل مقاله (1.01 M) | ||
| نوع مقاله: Research Papers | ||
| شناسه دیجیتال (DOI): 10.7508/ceij.2013.01.001 | ||
| نویسندگان | ||
| A. Ardeshir-Behrestaghi1؛ M. Eskandari-Ghadi* 2؛ J. Vaseghi-Amiri1 | ||
| 1Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran. | ||
| 2School of Civil Engineering, College of Engineering, University of Tehran, P.O.Box: 11155-4563, Tehran, Iran. | ||
| چکیده | ||
| The dynamic response of a transversely isotropic, linearly elastic layer bonded to the surface of a half-space of a different transversely isotropic material under arbitrary shape surface loads is considered. With the help of displacements and stresses Green’s functions, an analytical formulation is presented for the determination of the displacements and stresses at any point in both surface layer and the underneath half-space in frequency domain. Special results are prepared for circular, ellipsoidal, square and recangular patch load. It is shown that the displacements and stresses due to circular patch load are colapesd on the existing solution in the literature. Some new illustrations are prepared to show the effect of the shape of the patch on the responses of the domain specially near the load. | ||
| کلیدواژهها | ||
| Forced vibration؛ Layer Medium؛ Solid Mechanics؛ Transversely Isotropic؛ Wave Propagation | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 10,388 تعداد دریافت فایل اصل مقاله: 3,104 |
||