بررسی تأثیر تیمار لایه‌‌نشانی در سطوح مختلف هدایت الکتریکی بر ویژگی‌های کاغذ

[1]. Wagberg, L., Forsberg, S., Johansson, A., and Juntti, P. (2002). Engineering of fiber surface properties by application of the polyelectrolyte multilayer concept, Part1: Modification of paper strength. Journal of Pulp and Paper Science, 28(7): 222-228.

[2]. Decher, G., Hong, J.D., and Schmitt, J. (1992). Build up of ultrathin multilayer films by a self-assembly process. III: Consecutively alternating adsorption of anionic and cationic polyelectrolyte on charged surface. Thin Solid Film. 210/211: 831-835.

[3]. Ryu, J. (2009). Investigation of the effect of electrochemical properties of multilayered fibers on the sheet properties and the phenomenon of adsorption of polyelectrolytes onto pulp fiber in LbL (Layer-by-Layer) multilayering, Master thesis, Seoul National University, Korea.

[4]. Hubbe, M. (2006). Bonding between cellulosic fibers in the absence and presence of dry-strength agent- A review. BioResource, 1(2): 281-318.

[5]. Wistrand, I., Lingstrom, R., and Wagberg, L. (2007). Preparation of electrically conducting cellulose fibers utilizing polyelectrolyte multilayers of poly (3,4-ethylenedioxythiophene):poly (styrene sulphonate) and poly (allyl amine). European Polymer Journal, 43 (1): 4075-4091.

[6]. Youn, H.J., Chin, S.M., Ryu, J.H., and Kwon, H.S. (2007). Basic study on electrochemical properties of multilayered pulp fibers with polyelectrolytes. Journal of Korea TAPPI, 39(4):53-60.

[7]. Steeg, H.G.M., Cohen Stuart, M. A., de Keizer, A., and Bijsterbosch, B.H. (1992). Polyelectrolyte adsorption: A subtle balance of forces. Langmuir, 8(10): 2538-2546.

[8]. Wang, F., and Martin, H. (2002). Charge properties of fibers in the paper mill environment. 1. Effect of electrical conductivity. Journal of Pulp and Paper Science, 28(10): 347-353.

[9]. Lundstrom, H.L., Johansson, E., and Wagberg, L. (2010). Polyelectrolyte multilayers from cationic and anionic starch: Influence of charge density and salt concentration on the properties of the adsorbed layers. Starch/Starke, 62(2): 102-114.

[10]. Vermohlen, K., Lewandowski, H., Narres, H.-D., and Schwuger, M.J. (2000). Adsorption of Polyelectrolytes onto oxides- the influence of ionic strength, molar mass, and Ca²⁺ ions. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 163 (1): 45-53.

[11]. Herrington, T., and Midmore, B. (1992). Adsorption of ions at the cellulose/aqueous electrolyte interface. Part 1.Charge/pH isotherns. Journal of the Chemical Society, Faraday Transactions, 1. 180(6): 1525-1537.

[12]. Lloyd, J., and Horne, C. (1992). The determination of fiber charge and acidic groups of radiate pine pulps. Nordic Pulp Paper Research Journal, 8(1): 48-57.

[13]. Lindstrom, T., and Wagberg, L. (1983). Effects of pH and electrolyte concentration on the adsorption of cationic polyacrylamides on cellulose. Tappi Journal. 66(6): 83-85.

[14]. Larsson, A., and Staffan, W. (1998). Flocculation of cationic amylopectin starch and colloidal silicic acid. The effect of various salt. Colloidals and Surfaces, 139(2): 259-270.

[15]. Page, D.H. (1969). Theory for the tensile strength of paper. Tappi Journal, 52(4): 674-681.

[16]. Xing, Q., Eadula, S. R., and Lvov, Y. M. (2007). Cellulose fiber-enzyme composites fabricated through Layer-by-Layer nanoassembly. Biomacromolecules, 8(6): 1987-1991.

[17]. Kaubaa, A., and Zoltan, K. (1994). Measure of the internal bond strength of paper/board. Tappi Journal, 78(3): 103-111.

[18]. Lim, W.J., Liang, Y.T., and Seib, P.A. (1991). Cationic oat starch: preparation and effect on paper strength. Cereal Chemistry, 69(3): 237-239.

[19]. Johansson, E., Lundstrom, L., Norgren, M., and Wagberg, L. (2009). Adsorption behavior and adhesive properties of biopolyelectrolyte multilayers formed from cationic and anionic starch. Biomacromolecules, 10(7): 1768–1776.